Re: [PATCH 1/2] ARM: dts: am335x-bone-common: correct mux mode for cmd line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Balaji,

On 27/09/2013 13:35, Balaji T K wrote:
pinmux_emmc_pins: mux mode for cmd line should be MODE2
to detect eMMC on beagle bone black and beagle bone white + eMMC cape.

Signed-off-by: Balaji T K <balajitk@xxxxxx>
Tested-by: Felipe Balbi <balbi@xxxxxx>
---
based on git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts

  arch/arm/boot/dts/am335x-bone-common.dtsi |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index ff5c3ca..51f6a99 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -153,7 +153,7 @@
  	emmc_pins: pinmux_emmc_pins {
  		pinctrl-single,pins = <
  			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
  			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
  			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
  			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */


Thanks, I'll apply it for 3.13.

Regards,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux