On 10/04/2013 12:21 PM, Jean-Francois Moine wrote:
As defined in the DT, clkout2 is not allowed to change the pll inside
si5351.
This patch inverts the properties of the clkout{1,2} so that clkout2
may be defined as the external clock of the audio device in the Cubox.
Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
---
arch/arm/boot/dts/dove-cubox.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 022646e..5d1ece1 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -101,16 +101,16 @@
clkout1 {
reg = <1>;
- silabs,drive-strength = <8>;
silabs,multisynth-source = <1>;
silabs,clock-source = <0>;
- silabs,pll-master;
};
Jean-Francois,
thanks for the patch! If we have no use for clkout1 at all on CuBox,
we can also remove the above completely.
For this or an updated patch which removes clkout1 completely:
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
clkout2 {
reg = <2>;
+ silabs,drive-strength = <8>;
silabs,multisynth-source = <1>;
silabs,clock-source = <0>;
+ silabs,pll-master;
};
};
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
