The BU21013 touchscreen GPIOs have been pretty confused, correct
them per board, and move the GPIO assignments up to the top
level DTS file so we can control it from there, and avoid defining
the GPIO assignments for non-ST UIB equipped boards.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/boot/dts/ste-href-stuib.dtsi | 2 --
arch/arm/boot/dts/ste-hrefprev60-stuib.dts | 6 ++++++
arch/arm/boot/dts/ste-hrefprev60.dtsi | 6 ------
arch/arm/boot/dts/ste-hrefv60plus-stuib.dts | 10 ++++++++--
arch/arm/boot/dts/ste-hrefv60plus.dtsi | 6 ------
5 files changed, 14 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 524e332..76704ec 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -57,7 +57,6 @@
bu21013_tp@5c {
compatible = "rohm,bu21013_tp";
reg = <0x5c>;
- touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
rohm,touch-max-x = <384>;
@@ -68,7 +67,6 @@
bu21013_tp@5d {
compatible = "rohm,bu21013_tp";
reg = <0x5d>;
- touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
rohm,touch-max-x = <384>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
index 3e1b974..2b1cb5b 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -20,7 +20,13 @@
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
+ /* Only one of these will be used */
bu21013_tp@5c {
+ touch-gpio = <&gpio2 12 0x4>;
+ reset-gpio = <&tc3589x_gpio 13 0x4>;
+ };
+ bu21013_tp@5d {
+ touch-gpio = <&gpio2 12 0x4>;
reset-gpio = <&tc3589x_gpio 13 0x4>;
};
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index de6b0a0..b2cd7bc 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -49,12 +49,6 @@
};
};
- i2c@80110000 {
- bu21013_tp@5c {
- reset-gpio = <&tc3589x_gpio 13 0x4>;
- };
- };
-
vmmci: regulator-gpio {
gpios = <&tc3589x_gpio 18 0x4>;
enable-gpio = <&tc3589x_gpio 17 0x4>;
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
index 4da49e7..8c6a2de 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -22,8 +22,14 @@
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
- bu21013_tp@0x5c {
- reset-gpio = <&gpio4 15 0x4>;
+ /* Only one of these will be used */
+ bu21013_tp@5c {
+ touch-gpio = <&gpio2 20 0x4>;
+ reset-gpio = <&gpio4 17 0x4>;
+ };
+ bu21013_tp@5d {
+ touch-gpio = <&gpio2 20 0x4>;
+ reset-gpio = <&gpio4 17 0x4>;
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index d0f1165..aed511b 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -23,12 +23,6 @@
};
soc {
- i2c@80110000 {
- bu21013_tp@0x5c {
- reset-gpio = <&gpio4 15 0x4>;
- };
- };
-
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
