Hi Benoit, Could you please take the device tree related patches [5 to 10] in this series? Thanks. cheers, -roger On 09/24/2013 11:53 AM, Roger Quadros wrote: > We no longer need to model the RESET line as a regulator since > the USB phy-nop driver accepts "reset-gpios" property. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > --- > arch/arm/boot/dts/omap3-beagle.dts | 13 +------------ > 1 files changed, 1 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts > index dfd8310..71bde47 100644 > --- a/arch/arm/boot/dts/omap3-beagle.dts > +++ b/arch/arm/boot/dts/omap3-beagle.dts > @@ -44,17 +44,6 @@ > }; > }; > > - /* HS USB Port 2 RESET */ > - hsusb2_reset: hsusb2_reset_reg { > - compatible = "regulator-fixed"; > - regulator-name = "hsusb2_reset"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - gpio = <&gpio5 19 0>; /* gpio_147 */ > - startup-delay-us = <70000>; > - enable-active-high; > - }; > - > /* HS USB Port 2 Power */ > hsusb2_power: hsusb2_power_reg { > compatible = "regulator-fixed"; > @@ -68,7 +57,7 @@ > /* HS USB Host PHY on PORT 2 */ > hsusb2_phy: hsusb2_phy { > compatible = "usb-nop-xceiv"; > - reset-supply = <&hsusb2_reset>; > + reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ > vcc-supply = <&hsusb2_power>; > }; > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html