Split USB2 PHY and USB3 PHY into separate omap-control-usb
nodes. Get rid of "ti,type" property.
CC: Benoit Cousson <bcousson@xxxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/boot/dts/omap5.dtsi | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7cdea1b..c0ec6dc 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -626,12 +626,16 @@
hw-caps-temp-alert;
};
- omap_control_usb: omap-control-usb@4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a002370 0x4>;
- reg-names = "control_dev_conf", "phy_power_usb";
- ti,type = <2>;
+ omap_control_usb2phy: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb3phy: control-phy@4a002370 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
};
omap_dwc3@4a020000 {
@@ -662,7 +666,7 @@
usb2_phy: usb2phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x7c>;
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb2phy>;
};
usb3_phy: usb3phy@4a084400 {
@@ -671,7 +675,7 @@
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb3phy>;
};
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
