On 10/01/2013 10:17 AM, Vyacheslav Tyrtov wrote: > From: Tarek Dakhran <t.dakhran@xxxxxxxxxxx> > > The EXYNOS5410 clocks are statically listed and registered > using the Samsung specific common clock helper functions. > diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt > + [Core Clocks] > + [Clock Gate for Special Clocks] > + [Peripheral Clock Gates] These headers/titles for the sections/lists aren't consistently aligned. > + [Clock Gate for Special Clocks] > + > + Clock ID > + ---------------------------- > + sclk_uart0 128 > + sclk_uart1 129 > + sclk_uart2 130 > + sclk_uart3 131 > + sclk_mmc0 132 > + sclk_mmc1 133 > + sclk_mmc2 134 > + > + [Peripheral Clock Gates] > + > + Clock ID > + ---------------------------- > + > + uart0 257 > + uart1 258 > + uart2 259 > + uart3 260 > + mct 315 > + mmc0 351 > + mmc1 352 > + mmc2 353 That's not many clocks. I assume you're planning on adding more IDs later, in a backwards-compatible fashion? I suppose that's OK since it won't break any existing usage, as long as there's no need to renumber any existing values. On that topic, are any of those clock IDs derived from HW, e.g. register numbers, or bit numbers in an array of registers? Numbering clocks in a HW-derived fashion would make it easier or more obvious how to add new clock IDs later while maintaining some consistency and without introducing the desire to break any ABI. Finally, how about creating a header file such as include/dt-bindings/clock/exynos5410.h to define those clock IDs, so that both *.dts and the clock driver can share the values without having to manually write them? -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html