The wakeup gen mask/unmask callback uses the irq element of the irq_data to setup. The irq is the linux virtual irq number and is same as the hardware irq number only when the parent irqchip is setup as a legacy domain. When it is used as a linear domain, the virtual irqs are allocated dynamically and wakeup gen code cannot rely on these numbers to access the irq registers. Instead use the hwirq element of the irq_data which represent the physical irq number. Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Cc: Rajendra Nayak <rnayak@xxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Sricharan R <r.sricharan@xxxxxx> --- arch/arm/mach-omap2/omap-wakeupgen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 4dc16c2c..244839c 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -134,7 +134,7 @@ static void wakeupgen_mask(struct irq_data *d) unsigned long flags; raw_spin_lock_irqsave(&wakeupgen_lock, flags); - _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]); + _wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]); raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } @@ -146,7 +146,7 @@ static void wakeupgen_unmask(struct irq_data *d) unsigned long flags; raw_spin_lock_irqsave(&wakeupgen_lock, flags); - _wakeupgen_set(d->irq, irq_target_cpu[d->irq]); + _wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]); raw_spin_unlock_irqrestore(&wakeupgen_lock, flags); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
