Add DTS for s5pc110 boards: goni, aquila, smdkc110
s5pv210: smdkv210, tiny210, torbreck
Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/s5pv210-aquila.dts | 407 +++++++++++++++++++++++++++
arch/arm/boot/dts/s5pv210-goni.dts | 486 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/s5pv210-smdkc110.dts | 165 +++++++++++
arch/arm/boot/dts/s5pv210-smdkv210.dts | 273 ++++++++++++++++++
arch/arm/boot/dts/s5pv210-tiny210.dts | 262 ++++++++++++++++++
arch/arm/boot/dts/s5pv210-torbreck.dts | 157 +++++++++++
7 files changed, 1756 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-aquila.dts
create mode 100644 arch/arm/boot/dts/s5pv210-goni.dts
create mode 100644 arch/arm/boot/dts/s5pv210-smdkc110.dts
create mode 100644 arch/arm/boot/dts/s5pv210-smdkv210.dts
create mode 100644 arch/arm/boot/dts/s5pv210-tiny210.dts
create mode 100644 arch/arm/boot/dts/s5pv210-torbreck.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cf75889..759205b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -199,6 +199,12 @@ dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
+dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
+ s5pv210-tiny210.dtb \
+ s5pv210-goni.dtb \
+ s5pv210-smdkc110.dtb \
+ s5pv210-smdkv210.dtb \
+ s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
new file mode 100644
index 0000000..f12d407
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -0,0 +1,407 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PC110 Aquila";
+ compatible = "samsung,aquila", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x30000000 0x05000000
+ 0x40000000 0x18000000>;
+ };
+
+ xusbxti: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xusbxti";
+ #clock-cells = <0>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpios = <&mp05 4 0>;
+ enable-active-high;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+ };
+
+ i2c-pmic {
+ compatible = "i2c-gpio";
+ gpios = <&gpj4 0 0>, /* sda */
+ <&gpj4 3 0>; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "national,lp3974";
+ reg = <0x66>;
+
+ max8998,pmic-buck1-default-dvs-idx = <0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+ <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB+MIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VCC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VCC_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB+VDAC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC+VCAM_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_IO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "CAM_ISP_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "CAM_A_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "CAM_CIF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_AF_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "CAM_8M_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VARM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VINT_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "CAM_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vichg_reg: ENVICHG {
+ regulator-name = "VICHG";
+ };
+
+ safeout1_reg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-always-on;
+ };
+
+ safeout2_reg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+ };
+ };
+
+ };
+
+ i2c-ac {
+ compatible = "i2c-gpio";
+ gpios = <&mp05 3 0>, /* sda */
+ <&mp05 2 0>; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gph2 6 1>;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ keypad: keypad@e1600000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0xe1600000 0x100>;
+ interrupt-parent = <&vic2>;
+ interrupts = <25>;
+ clocks = <&clocks KEYIF>;
+ clock-names = "keypad";
+ status = "okay";
+ linux,input-no-autorepeat;
+ linux,input-wakeup;
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <1>;
+ linux,code = <KEY_CONNECT>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <2>;
+ linux,code = <KEY_BACK>;
+ };
+
+ key_3 {
+ keypad,row = <1>;
+ keypad,column = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ key_4 {
+ keypad,row = <1>;
+ keypad,column = <2>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ key_5 {
+ keypad,row = <2>;
+ keypad,column = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key_6 {
+ keypad,row = <2>;
+ keypad,column = <2>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+};
+
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+ vmmc-supply = <&ldo5_reg>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+ pinctrl-names = "default";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&onenand {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_a-supply = <&ldo3_reg>;
+ vusb_d-supply = <&ldo8_reg>;
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&clocks SCLK_USBPHY1>;
+ clock-names = "phy", "device", "host";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <0>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <16>;
+ hback-porch = <16>;
+ hsync-len = <2>;
+ vback-porch = <3>;
+ vfront-porch = <28>;
+ vsync-len = <1>;
+ };
+ };
+};
+
+&pinctrl0 {
+ t_flash_detect: t-flash-detect {
+ samsung,pins = "gph3-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ };
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
new file mode 100644
index 0000000..e7c371e
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -0,0 +1,486 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PC110 Goni";
+ compatible = "samsung,goni", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x30000000 0x1c000000>;
+ };
+
+ fixed-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xxti: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-output-names = "xxti";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&gph2 6 1>;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ keypad: keypad@e1600000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0xe1600000 0x100>;
+ interrupt-parent = <&vic2>;
+ interrupts = <25>;
+ clocks = <&clocks KEYIF>;
+ clock-names = "keypad";
+ status = "okay";
+ linux,input-no-autorepeat;
+ linux,input-wakeup;
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <1>;
+ linux,code = <KEY_CONNECT>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <2>;
+ linux,code = <KEY_BACK>;
+ };
+
+ key_3 {
+ keypad,row = <1>;
+ keypad,column = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ key_4 {
+ keypad,row = <1>;
+ keypad,column = <2>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ key_5 {
+ keypad,row = <2>;
+ keypad,column = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ key_6 {
+ keypad,row = <2>;
+ keypad,column = <2>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <0>;
+ gpios = <&mp05 4 0>;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+
+ tsp_reg: fixed-regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_VDD";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <3>;
+ gpios = <&gpj1 3 0>;
+ enable-active-high;
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpj4 0 0>, /* sda */
+ <&gpj4 3 0>; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "national,lp3974";
+ reg = <0x66>;
+
+ max8998,pmic-buck1-default-dvs-idx = <0>;
+ max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+ <&gph0 4 0>;
+ max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ max8998,pmic-buck2-default-dvs-idx = <0>;
+ max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+ max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+ regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB+MIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VCC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VLCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB+VDAC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC+VCAM_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_IO_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "CAM_ISP_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "CAM_A_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "CAM_CIF_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_AF_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "CAM_8M_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VARM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VINT_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "CAM_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&ldo5_reg>;
+ status = "okay";
+};
+
+&sdhci1 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci3 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus4>;
+ status = "okay";
+};
+
+&hsotg {
+ vusb_a-supply = <&ldo3_reg>;
+ vusb_d-supply = <&ldo8_reg>;
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&clocks SCLK_USBPHY1>;
+ clock-names = "phy", "device", "host";
+};
+
+&spi_0 {
+ status = "okay";
+};
+
+&spi_1 {
+ status = "okay";
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ samsung,i2c-slave-addr = <0x10>;
+
+ tsp@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&gpj0>;
+ interrupts = <5 2>;
+
+ atmel,x-line = <17>;
+ atmel,y-line = <11>;
+ atmel,x-size = <800>;
+ atmel,y-size = <480>;
+ atmel,burst-length = <0x21>;
+ atmel,threshold = <0x28>;
+ atmel,orientation = <1>;
+
+ vdd-supply = <&tsp_reg>;
+ };
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-slave-addr = <0x10>;
+
+ noon010pc30: sensor@30 {
+ compatible = "siliconfile,noon010pc30";
+ reg = <0x30>;
+ vddio-supply = <&ldo11_reg>;
+ vdda-supply = <&ldo13_reg>;
+ vdd_core-supply = <&ldo14_reg>;
+
+ clock-frequency = <16000000>;
+ clocks = <&clock_cam 0>;
+ clock-names = "mclk";
+ nreset-gpios = <&gpb 2 0>;
+ nstby-gpios = <&gpb 0 0>;
+
+ port {
+ noon010pc30_ep: endpoint {
+ remote-endpoint = <&fimc0_ep>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+};
+
+&camera {
+ status = "okay";
+ parallel-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* camera A input */
+ port@1 {
+ reg = <1>;
+ fimc0_ep: endpoint {
+ remote-endpoint = <&noon010pc30_ep>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+};
+
+&fimc_0 {
+ status = "okay";
+};
+
+&fimc_1 {
+ status = "okay";
+};
+
+&fimc_2 {
+ status = "okay";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <0>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <16>;
+ hback-porch = <16>;
+ hsync-len = <2>;
+ vback-porch = <2>;
+ vfront-porch = <28>;
+ vsync-len = <1>;
+ };
+ };
+};
+
+&onenand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
new file mode 100644
index 0000000..a54dbf6
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -0,0 +1,165 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PC110 SMDK";
+ compatible = "samsung,smdkc110", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <>;
+ };
+
+ fixed-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xxti: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-output-names = "xxti";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <0>;
+ gpios = <&mp05 4 0>;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhci1 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci3 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi_0 {
+ status = "okay";
+};
+
+&spi_1 {
+ status = "okay";
+};
+
+&hsotg {
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&xusbxti>;
+ clock-names = "phy", "device", "host";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&g2d {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
new file mode 100644
index 0000000..c0388e6
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -0,0 +1,273 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PV210 SMDK";
+ compatible = "samsung,smdkv210", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <>;
+ };
+
+ fixed-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xxti: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-output-names = "xxti";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <0>;
+ gpios = <&mp05 4 0>;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+ };
+
+ i2c-ac {
+ compatible = "i2c-gpio";
+ gpios = <&mp05 3 0>, /* sda */
+ <&mp05 2 0>; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ keypad: keypad@e1600000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0xe1600000 0x100>;
+ interrupt-parent = <&vic2>;
+ interrupts = <25>;
+ clocks = <&clocks KEYIF>;
+ clock-names = "keypad";
+ status = "okay";
+ linux,input-no-autorepeat;
+ linux,input-wakeup;
+ samsung,keypad-num-rows = <8>;
+ samsung,keypad-num-columns = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+ <&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
+ <&keypad_row6>, <&keypad_row7>,
+ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
+ <&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
+ <&keypad_col6>, <&keypad_col7>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <KEY_1>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <KEY_2>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <KEY_3>;
+ };
+
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <KEY_4>;
+ };
+
+ key_5 {
+ keypad,row = <0
+ >;
+ keypad,column = <7>;
+ linux,code = <KEY_5>;
+ };
+
+ key_6 {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <KEY_A>;
+ };
+ key_7 {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <KEY_B>;
+ };
+
+ key_8 {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <KEY_C>;
+ };
+
+ key_9 {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <KEY_D>;
+ };
+
+ key_10 {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <KEY_E>;
+ };
+ };
+
+ ethernet@18000000 {
+ compatible = "davicom,dm9000";
+ reg = <0xA8000000 0x2 0xA8000004 0x2>;
+ interrupt-parent = <&mp01>;
+ interrupts = <5 2>;
+ local-mac-address = [00 00 de ad be ef];
+ davicom,no-eeprom;
+ status = "disable";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhci1 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci3 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi_0 {
+ status = "okay";
+};
+
+&spi_1 {
+ status = "okay";
+};
+
+&hsotg {
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&xusbxti>;
+ clock-names = "phy", "device", "host";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&g2d {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/s5pv210-tiny210.dts b/arch/arm/boot/dts/s5pv210-tiny210.dts
new file mode 100644
index 0000000..f5b5095
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-tiny210.dts
@@ -0,0 +1,262 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PC110 TINY210";
+ compatible = "samsung,tiny", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x20000000 0x20000000>;
+ };
+
+ fixed-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xxti: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-output-names = "xxti";
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <0>;
+ gpios = <&mp05 4 0>;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+
+ mipi_reg: fixed-regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VUSB+MIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ reg = <3>;
+ };
+
+ vusb_reg: fixed-regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VUSB+VDAC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ reg = <4>;
+ };
+ };
+
+ i2c-ac {
+ compatible = "i2c-gpio";
+ gpios = <&mp05 3 0>, /* sda */
+ <&mp05 2 0>; /* scl */
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&gph2 0 1>;
+ linux,code = <158>;
+ label = "HOME";
+ debounce-interval = <1>;
+ };
+
+ home-key {
+ gpios = <&gph2 1 1>;
+ linux,code = <102>;
+ label = "MENU";
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
+ menu-key {
+ gpios = <&gph2 2 1>;
+ linux,code = <139>;
+ label = "BACK";
+ debounce-interval = <1>;
+ };
+
+ dpad-center-key {
+ gpios = <&gph2 3 1>;
+ linux,code = <139>;
+ label = "DPAD_CENTER";
+ debounce-interval = <1>;
+ };
+
+ dpad-left-key {
+ gpios = <&gph3 0 1>;
+ linux,code = <232>;
+ label = "DPAD_LEFT";
+ debounce-interval = <1>;
+ };
+
+ dpad-down-key {
+ gpios = <&gph3 1 1>;
+ linux,code = <158>;
+ label = "DPAD_DOWN";
+ debounce-interval = <1>;
+ };
+
+ dpad-up-key {
+ gpios = <&gph3 2 1>;
+ linux,code = <102>;
+ label = "DPAD_UP";
+ debounce-interval = <1>;
+ };
+
+ dpad-right-key {
+ gpios = <&gph3 3 1>;
+ linux,code = <106>;
+ label = "DPAD_RIGHT";
+ debounce-interval = <1>;
+ };
+
+ ok-key {
+ gpios = <&gph1 7 1>;
+ linux,code = <102>;
+ label = "OK";
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+};
+
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhci1 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci3 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spi_0 {
+ status = "okay";
+};
+
+&spi_1 {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_a-supply = <&mipi_reg>;
+ vusb_d-supply = <&vusb_reg>;
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&xusbxti>;
+ clock-names = "phy", "device", "host";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&g2d {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
new file mode 100644
index 0000000..a51f1dc
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -0,0 +1,157 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013 Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+ model = "S5PV210 TORBRECK";
+ compatible = "samsung,torbreck", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <>;
+ };
+
+ fixed-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xxti: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-output-names = "xxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vtf_reg: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ reg = <0>;
+ gpios = <&mp05 4 0>;
+ };
+
+ pda_reg: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ reg = <1>;
+ };
+
+ bat_reg: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ reg = <2>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&sdhci0 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&sdhci1 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gph3 4 1>;
+ vmmc-supply = <&vtf_reg>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&sdhci3 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&hsotg {
+ status = "okay";
+};
+
+&usbphy {
+ clocks = <&clocks USB_OTG>, <&xusbxti>, <&xusbxti>;
+ clock-names = "phy", "device", "host";
+};
+
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&g2d {
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
\ No newline at end of file
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
