On Sep 17, 2013, at 2:30 PM, Suman Anna wrote: > HwSpinlock IP is present only on OMAP4 and other newer SoCs, > which are all device-tree boot only. This patch adds the > base support for parsing the DT nodes, and removes the code > dealing with the traditional platform device instantiation. > > Signed-off-by: Suman Anna <s-anna@xxxxxx> > --- > .../devicetree/bindings/hwlock/omap-hwspinlock.txt | 31 +++++++++++ > arch/arm/mach-omap2/Makefile | 3 -- > arch/arm/mach-omap2/hwspinlock.c | 60 ---------------------- > drivers/hwspinlock/omap_hwspinlock.c | 23 +++++++-- > 4 files changed, 50 insertions(+), 67 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > delete mode 100644 arch/arm/mach-omap2/hwspinlock.c > > diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > new file mode 100644 > index 0000000..235b7c5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt > @@ -0,0 +1,31 @@ > +OMAP4+ HwSpinlock Driver > +======================== > + > +Required properties: > +- compatible: Currently supports only "ti,omap4-hwspinlock" for > + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs > +- reg: Contains the hwspinlock register address range (base > + address and length) > +- ti,hwmods: Name of the hwmod associated with the hwspinlock device > + > +Common hwlock properties: > +The following describes the usage of the common hwlock properties (defined in > +Documentation/devicetree/bindings/hwlock/hwlock.txt) on OMAP. > + > +- hwlock-base-id: There are currently no OMAP SoCs with multiple > + hwspinlock devices. The OMAP driver uses a default > + base id value of 0 for the locks present within the > + single hwspinlock device on all SoCs. > +- hwlock-num-locks: This property is not required on OMAP SoCs, since the > + number of locks present within a device can be deduced > + from the SPINLOCK_SYSSTATUS device register. If you are going to be explicit about this properties, you should probably be a bit more clear about them NOT being in the OMAP dts because of the reasons you specify. > + > + > +Example: > + > +/* OMAP4 */ > +hwspinlock: spinlock@4a0f6000 { > + compatible = "ti,omap4-hwspinlock"; > + reg = <0x4a0f6000 0x1000>; > + ti,hwmods = "spinlock"; > +}; - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html