Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9/25/2013 9:47 PM, Balaji T K wrote:
> On Tuesday 24 September 2013 03:11 PM, Benoit Cousson wrote:
>> + Sekhar
>>
>> Hi Balaji,
>>
>> On 26/08/2013 15:53, Balaji T K wrote:
>>> Add mmc2 dt node to dra7-evm board
>>> and model eMMC vcc as fixed regulator.
>>>
>>> Signed-off-by: Balaji T K <balajitk@xxxxxx>
>>> ---
>>>   arch/arm/boot/dts/dra7-evm.dts |   14 ++++++++++++++
>>>   1 files changed, 14 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/dra7-evm.dts
>>> b/arch/arm/boot/dts/dra7-evm.dts
>>> index a59bbd0..2062724 100644
>>> --- a/arch/arm/boot/dts/dra7-evm.dts
>>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>>> @@ -17,6 +17,13 @@
>>>           device_type = "memory";
>>>           reg = <0x80000000 0x60000000>; /* 1536 MB */
>>>       };
>>> +
>>> +    mmc2_3v3: fixedregulator-mmc2 {
>>> +        compatible = "regulator-fixed";
>>> +        regulator-name = "mmc2_3v3";
>>> +        regulator-min-microvolt = <3300000>;
>>> +        regulator-max-microvolt = <3300000>;
>>> +    };
>>>   };
>>>
>>>   &dra7_pmx_core {
>>> @@ -257,3 +264,10 @@
>>>       vmmc-supply = <&ldo1_reg>;
>>>       bus-width = <4>;
>>>   };
>>> +
>>> +&mmc2 {
>>> +    status = "okay";
>>> +    vmmc-supply = <&mmc2_3v3>;
>>> +    bus-width = <8>;
>>> +    ti,non-removable;
>>
>> Sekhar just posted a series to replace that with a non-TI attribute:
>> non-removable.
>>
>> I'm not sure if this got merged, but it might be good to use the
>> standard attribute instead.
> 
> Hi Benoit,
> 
> Those patches are not merged yet, standard attribute is good, but few
> cleanups are needed
> before ti,non-removable can be replaced by standard non-removable,
> no_regulator_off_init flag set under ti,non-removable is needed to
> detect eMMC
> during boot on OMAP4 devices to keep regulator ON during init. Given
> that eMMC on dra7-evm
> is powered by always ON regulator, ti,non-removable and standard
> attribute will behave same
> way. Let me know if you want to remove ti,non-removable attribute from
> this patch.

I dont think its an issue if ti,non-removable and non-removable behave
exactly the same. In fact, it will be confusing if they behave differently.

I understand there is a need to clean-up the code around
no_regulator_off_init, but I am hoping that can be kept separate from
moving to a generic binding. The two clean-ups can be done independent
of each other.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux