On 09/26/2013 01:28 PM, Jean-Francois Moine wrote:
On Thu, 26 Sep 2013 10:31:10 +0200
Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> wrote:
On 09/26/2013 10:11 AM, Jean-Francois Moine wrote:
In the Cubox, I changed the audio DT to:
&i2s1 {
status = "okay";
clocks = <&gate_clk 13>, <&si5351 1>;
clock-names = "internal", "extclk";
pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_gpio_13_audio1>;
Have you checked that pinmux was configured correctly?
You are missing a
pinctrl-names = "default";
to actually execute the above pinmux setting.
Thanks, the pinmux was not set correctly, and I added the "default".
[snip]
What about trying to get 48kHz working first? Does it work with
internal DCO and 48kHz? External audio clock should be 256*fs as stated
in dove datasheet.
I have no input with 48kHz.
Or 44k1, just something that works with internal dco. kirkwood-i2s
should request 256*fs, or 11289600 Hz for 44k1 audio rate from external
clock.
For more information, I use i2s input in the tda998x with audio rate
96kHz on HDMI output. The sound is fine with the internal dco (tested
with 44.1kHz only).
Sorry, I don't understand the above "information". How can you have a
different input audio rate tested with 44k1 output rate?
The internal dco permits only 44.1, 44 and 96 kHz, so, vlc translates
the input rates smaller than 44.1 kHz to 44.1 kHz.
So you are actually testing 44k1 in any case. Let's stick with 44k1 for
now.
Have you ever tested your audio equipment with something different than
48k and 44k1 SPDIF PCM? Are you actually sure it works at all, i.e. do
you have different audio source with SPDIF >48kHz? Can you try optical
SPDIF instead of HDMI?
Just try to narrow it down, currently I cannot see why this behavior
should be limited to either si5351 or dove audio alone.
I have no optical S/PDIF.
Ok, but 44k1 works with HDMI, we try to reproduce 44k1 with external
clock now.
Well, I did more tests:
- i2s or s/pdif input by the tda998x work fine with the internal dco
Ok.
- the pinmux seems correct:
device f10b4000.audio-controller
state default
type MUX_GROUP (2)
controlling device f10d0200.pin-ctrl
group mpp_audio1
function i2s1/spdifo
device f10b4000.audio-controller
state default
type MUX_GROUP (2)
controlling device f10d0200.pin-ctrl
group mpp13
function audio1
- I tried both <&si5351 1> and <&si5351 2>, and I get no sound with the
external clock.
- when running vlc with the external clock, the flux towards the
kirkwood driver is blocked and there is no sound interrupt.
47: 0 main-interrupt-ctrl 21 kirkwood-i2s
Can you add "usleep_range(10000, 12000);" after clk_set_rate(extclk) in
kirkwood-i2s. That should be enough to get around any issues with
external clock not being stable. I will look up real requirements for
si5351 later (and actually this should move to clk-si5351.c later too).
Please make sure, you stick with 44k1 (or something that works with
DCO).
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
