Hi Kukjin,
Can you please take this patch to your tree?
Best Regards
Yuvaraj
On Tue, Sep 3, 2013 at 11:30 AM, Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx> wrote:
> This patch adds the mmc device tree node entries for exynos5420 SOC.
> Exynos5420 has a different version of DWMMC controller,so a new
> compatible string is used to distinguish it from the prior SOC's.
>
> This patch depends on
> [1]mmc: dw_mmc: exynos: configure SMU in exynos5420
> [2]mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
> [3]mmc: dw_mmc: update binding document exynos-dw-mshc.txt
>
> changes since v6:
> 1.renamed node name to mmc
> 2.Used compatible string "samsung,exynos5420-dw-mshc"
> for controller instance which does not have SMU.
> 3.Used compatible string "samsung,exynos5420-dw-mshc-smu"
> for controller instance which has SMU.
>
> changes since v5:
> 1.removed instance index from node name.
> 2.changed the node name to mshc.
> 3.changed the reg property value for mshc_2.
>
> changes since v4:
> 1.Droppped the bypass-smu binding property.
> 2.Used compatible string "samsung,exynos5250-dw-mshc"
> for controller instance which does not have SMU.
>
> changes since V3:
> 1.change fifo-depth size from 0x80 to 0x40
> 2.Move the below properties
> a.card-detect-delay
> b.samsung,dw-mshc-ciu-div
> c.samsung,dw-mshc-sdr-timing
> d.samsung,dw-mshc-ddr-timing
> from SOC dts to board dts file as suggested by Doug Anderson
>
> changes since V2:
> 1.dropped num-slots property from node as its not required
> if number of card slots available is 1.
>
> 2.Move the below properties
> a.fifo-depth
> b.card-detect-delay
> c.samsung,dw-mshc-ciu-div
> d.samsung,dw-mshc-sdr-timing
> e.samsung,dw-mshc-ddr-timing
> from board dts to SOC dts,as these are not board specific properties.
>
> 3.Updated the binding document exynos-dw-mshc.txt.
>
> changes since V1:
> 1.disable node by status = disabled in SOC file
> 2.enable node by status = okay in board specific file
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 2 +
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 33 +++++++++++++++++
> arch/arm/boot/dts/exynos5420.dtsi | 39 ++++++++++++++++++++
> 3 files changed, 74 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index 6d1c098..84cd56f 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -16,6 +16,8 @@ Required Properties:
> specific extensions.
> - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
> specific extensions.
> + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
> + specific extensions.
>
> * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
> unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index bafba25..8df4ddc 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -31,6 +31,39 @@
> };
> };
>
> + mmc@12200000 {
> + status = "okay";
> + broken-cd;
> + supports-highspeed;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <0 4>;
> + samsung,dw-mshc-ddr-timing = <0 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <8>;
> + };
> + };
> +
> + mmc@12220000 {
> + status = "okay";
> + supports-highspeed;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 3>;
> + samsung,dw-mshc-ddr-timing = <1 2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> + };
> +
> dp-controller@145B0000 {
> pinctrl-names = "default";
> pinctrl-0 = <&dp_hpd>;
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index d537cd7..897f7f4 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -22,6 +22,9 @@
> compatible = "samsung,exynos5420";
>
> aliases {
> + mshc0 = &mmc_0;
> + mshc1 = &mmc_1;
> + mshc2 = &mmc_2;
> pinctrl0 = &pinctrl_0;
> pinctrl1 = &pinctrl_1;
> pinctrl2 = &pinctrl_2;
> @@ -84,6 +87,42 @@
> clock-names = "mfc";
> };
>
> + mmc_0: mmc@12200000 {
> + compatible = "samsung,exynos5420-dw-mshc-smu";
> + interrupts = <0 75 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x12200000 0x2000>;
> + clocks = <&clock 351>, <&clock 132>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mmc_1: mmc@12210000 {
> + compatible = "samsung,exynos5420-dw-mshc-smu";
> + interrupts = <0 76 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x12210000 0x2000>;
> + clocks = <&clock 352>, <&clock 133>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> + mmc_2: mmc@12220000 {
> + compatible = "samsung,exynos5420-dw-mshc";
> + interrupts = <0 77 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x12220000 0x1000>;
> + clocks = <&clock 353>, <&clock 134>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x40>;
> + status = "disabled";
> + };
> +
> mct@101C0000 {
> compatible = "samsung,exynos4210-mct";
> reg = <0x101C0000 0x800>;
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
