Hi >> Hello, >> >> Here is a second version of the patch set that adds a Device Tree >> binding and the related code to support fixed PHYs. Marked as RFC, >> this patch set is obviously not intended for merging in 3.12. >> >> Since the first version, the changes have been: >> >> * Instead of using a 'fixed-link' property inside the Ethernet device >> DT node, with a fairly cryptic succession of integer values, we now >> use a PHY subnode under the Ethernet device DT node, with explicit >> properties to configure the duplex, speed, pause and other PHY >> properties. >> >> * The PHY address is automatically allocated by the kernel and no >> longer visible in the Device Tree binding. >> >> * The PHY device is created directly when the network driver calls >> of_phy_connect_fixed_link(), and associated to the PHY DT node, >> which allows the existing of_phy_connect() function to work, >> without the need to use the deprecated of_phy_connect_fixed_link(). >> >> The things I am not entirely happy with yet are: >> >> * The PHY ID is hardcoded to 0xdeadbeef. Ideally, it should be a >> properly reserved vendor/device identifier, but it isn't clear how >> to get one allocated for this purpose. >> >> * The fixed_phy_register() function in drivers/net/phy/fixed.c has >> some OF references. So ideally, I would have preferred to put this >> code in drivers/of/of_mdio.c, but to call get_phy_device(), we need >> a reference to the mii_bus structure that represents the fixed MDIO >> bus. >> >> * There is some error management missing in fixed_phy_register(), but >> it can certainly be added easily. This RFC is meant to sort out the >> general idea. > > +1 for the general idea. This really looks good now. I've not much more > to say. Maybe someone from the devicetree corner has a few words for the > binding? > I tested the whole series with an I.MX6D board with the FEC driver: fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=-1) For me binding looks nice and I hope to see this patch series in 3.13. Tested-by: Christian Gmeiner <christian.gmeiner@xxxxxxxxx> -- Christian Gmeiner, MSc -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html