Re: [PATCH] media: i2c: adv7343: fix the DT binding properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Sep 24, 2013 at 3:03 AM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
> On 09/23/2013 05:50 AM, Laurent Pinchart wrote:
>> On Monday 23 September 2013 08:18:52 Prabhakar Lad wrote:
>>> On Fri, Sep 20, 2013 at 3:22 PM, Sylwester Nawrocki wrote:
>>>> On 09/20/2013 10:11 AM, Prabhakar Lad wrote:
>>>>> OK I will, just send out a fix up patch which fixes the mismatch between
>>>>> names for the rc-cycle, and later send out a patch which removes the
>>>>> platform data usage for next release with proper DT bindings.
>>>>
>>>> I think the binding need to be fully corrected now, I just meant to not
>>>> touch the board file, i.e. leave non-dt support unchanged.
>>>
>>> Ok
>>>
>>>>> I'm OK with making regulator properties as optional, But still it would
>>>>> change the meaning of what DT is, we know that the VDD/VDD_IO .. etc
>>>>> pins are required properties (but still making them as optional) :-(
>>>>>
>>>>> I think there might several devices where this situation may arise so
>>>>> just thinking of a alternative solution.
>>>>>
>>>>> say we have property 'software-regulator' which takes true/false(0/1)
>>>>> If set to true we make the regulators as required property or else we
>>>>> assume it is handled and ignore it ?
>>>>
>>>> I don't think this is a good idea. You would have to add a similar
>>>> platform data flag for non-dt, it doesn't sound right. I can see two
>>>> options here:
>>>>
>>>> 1. Make the regulator properties mandatory and, e.g. define a fixed
>>>>    voltage GPIO regulator in DT with an empty 'gpio' property. Then
>>>>    pass a phandle to that regulator in the adv7343 *-supply properties.
>>>>    For non-dt similarly a fixed voltage regulator(s) and voltage
>>>>    supplies  would need to be defined in the board files.
>>>>
>>>> 2. Make the properties optional and use (devm_)regulator_get_optional()
>>>>    calls in the driver (a recently added function). I must admit I don't
>>>>    fully understand description of this function, it currently looks
>>>>    pretty much same as (devm_)regulator_get(). Thus the driver would
>>>>    need to be handling regulator supplies only when non ERR_PTR() is
>>>>    returned from regulator_get_optional() and otherwise assume a non
>>>>    critical error. There is already quite a few example occurrences of
>>>>    regulator_get_optional() usage.
>>>
>>> Thanks for pointing it I'll choose option 2 and post the patch.
>>
>> Isn't regulator_get_optional() intended for devices that can have supplies
>> unconnected in normal use ?
>
> I believe so, yes.
>
Agreed

>> The ADV7343 supplies are mandatory from a hardware
>> point of view, so I think we should use regulator_get(). Otherwise the driver
>> won't be able to tell the difference between a regulator that isn't present
>> yet (for instance because the regulator device/driver hasn't been probed yet),
>> which should result in deferred probing, and an always-on regulator that has
>> been left out.
>
> So I think you want to make the supply properties mandatory in DT (since
> some form of supply is mandatory in HW), yet make the driver support
> broken DTs which don't have those properties, by error-checking the
> return value from regulator_get(). You might want to put a note into DT
> saying that a previous version of the binding didn't require those
> supply properties, so they may be missing from older DTs.

OK, I'll fix it and repost the patch.

Regards,
--Prabhakar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux