omap5 has all devices enable by default. Disable thosw not required in omap5 uevm board. Fix the following: Added status parameter Simulataneously, fix some tab formatting. Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx> --- arch/arm/boot/dts/omap5-uevm.dts | 38 +++++++++++++++++++++++++++++++------- 1 files changed, 31 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 65d7b60..78cf0f2 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -450,6 +450,18 @@ }; }; +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&i2c4 { + status = "disabled"; +}; + &i2c5 { pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins>; @@ -471,7 +483,7 @@ }; &mcspi1 { - + status = "disabled"; }; &mcspi2 { @@ -490,16 +502,28 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + status = "disabled"; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + status = "disabled"; }; &uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; + +&uart6 { + status = "disabled"; }; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html