Re: [PATCH 1/6] clk: exynos-audss: convert to platform device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 09/23/2013 11:25 PM, Andrew Bresticker wrote:
+static int exynos_audss_clk_remove(struct platform_device *pdev)
+{
+     of_clk_del_provider(pdev->dev.of_node);
+
+     return 0;
  }

Don't we need to unregister all the registered clocks in remove? This also
leads to another question: Do we even need removal support for this
driver?

Agreed - I don't think we should support removal of this device, but
it looks like __device_release_driver() just ignores the lack of a
remove callback or the return value from remove.  I suppose we could
just yell that removal is not supported if it is ever attempted.

That might be a good idea, without proper remove() method deferred
probing will also not work. I'd assume there should be only, e.g.
WARN() in the remove() callback or it should be properly implemented,
with clk_unregister() call for each currently registered clock.

Note that clk_unregister() is currently not implemented and removal
of this driver cannot be properly supported at the moment anyway.

Not sure what's more appropriate, it's probably better to add
clk_unregister() calls. This would be effectively a dead code though,
as long as core_initcall is used.

+static int __init exynos_audss_clk_init(void)
+{
+     return platform_driver_register(&exynos_audss_clk_driver);
+}
+core_initcall(exynos_audss_clk_init);

Does it need to be core_initcall? Drivers depending on clocks provided by
this driver should be able to defer probing if they are probed before this
driver.

Unfortunately there are a couple of issues with making this a module_initcall:
     1. On the Exynos5420, the AudioSS block provides the apb_pclk gate
for the ADMA bus, which is probed at postcore_initcall time and does
not support deferred probing, and
     2. the common clock framework doesn't differentiate between the
clock not being specified at all and the clock being specified, but
the provider not being registered yet (i.e. the case where probe
deferral would be appropriate) - it just returns ENOENT in both cases.

AFAICS this shouldn't be difficult to improve. I guess it has not been
properly addressed so far because there is currently no properly working
modular clock provider drivers, using the common clock framework, yet.
Unless someone bits me to it, I might have a look at that, as I also found
it a bit it inconvenient.

--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux