On Saturday 21 September 2013 12:41 AM, Nishanth Menon wrote:
On 09/20/2013 12:38 PM, Balaji T K wrote:correct mux mode for mmc1_cmd to detect eMMC on bone-black Signed-off-by: Balaji T K <balajitk@xxxxxx> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 56361ce..90ab56c 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -117,7 +117,7 @@ emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */is'nt this a common change? why is it "black only"? if it is so, then the pinmux should probably be spun off outside bone-common.dtsi into boneblack.dtsi perhaps?
It is applicable for add-on eMMC-cape for beagle bone white, so eMMC pinmux can remain in bone-common.dtsi. However I could test only on beagle bone black which has eMMC on board, since I don't have access to eMMC-cape -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
