Re: [PATCH v2] clk: si570: Add a driver for SI570 oscillators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Sep 18, 2013 at 03:43:38PM -0700, Soren Brinkmann wrote:
> Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
> The devices generate low-jitter clock signals and are reprogrammable via
> an I2C interface.
> 
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> ---
> v2:
>  - document clock-output-names in bindings documentation
>  - don't use wildcards in compatibility string
>  - change Kconfig entry to "... 570 and compatible devices"
>  - change some indentation flaws
>  - use 10000 as MIN and MAX value in usleep_range
>  - fail probe() if 'factory-fout' is not provided in DT
>    - default factory fout #defines removed
>  - use i2c driver_data instead of OF data
>    - remove some related structs and data
>  - rename DT property 'initial-fout' => 'clock-frequency' (like si5351
>    driver)
>  - add some more details regarding the 'factory-fout' DT property
> 
>  .../devicetree/bindings/clock/silabs,si570.txt     |  38 ++
>  drivers/clk/Kconfig                                |  10 +
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/clk-si570.c                            | 517 +++++++++++++++++++++
>  4 files changed, 566 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/silabs,si570.txt
>  create mode 100644 drivers/clk/clk-si570.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
> new file mode 100644
> index 0000000..7ab5c8b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
> @@ -0,0 +1,38 @@
> +Binding for Silicon Labs 570, 571, 598 and 599 programmable
> +I2C clock generators.
> +
> +Reference
> +This binding uses the common clock binding[1]. Details about the devices can be
> +found in the data sheets[2][3].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Si570/571 Data Sheet
> +    http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
> +[3] Si598/599 Data Sheet
> +    http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
> +
> +Required properties:
> + - compatible: Shall be one of "silabs,si570", "silabs,si571",
> +			       "silabs,si598", "silabs,si599"
> + - reg: I2C device address.
> + - #clock-cells: From common clock bindings: Shall be 0.
> + - factory-fout: Factory set default frequency. This frequency is part specific.
> +		 The correct frequency for the part used has to be provided in
> +		 order to generate the correct output frequencies. For more
> +		 details, please refer to the data sheet.
> +
> +Optional properties:
> + - clock-output-names: From common clock bindings. Recommended to be "si570".
> + - clock-frequency: Output frequency to generate. This defines the output
> +		    frequency set during boot. It can be reprogrammed during
> +		    runtime using the common clock framework.
> + - temperature-stability-7ppm: Indicate a device with a temperature stability
> +			       of 7ppm
> +
> +Example:
> +	si570: clock-generator@5d {
> +		#clock-cells = <0>;
> +		compatible = "silabs,si570";
> +		reg = <0x5d>;
> +		factory-fout = <156250000>;
> +	};
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 279407a..349b88a 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -64,6 +64,16 @@ config COMMON_CLK_SI5351
>  	  This driver supports Silicon Labs 5351A/B/C programmable clock
>  	  generators.
>  
> +config COMMON_CLK_SI570
> +	tristate "Clock driver for SiLabs 570 and compatible devices"
> +	depends on I2C
> +	depends on OF
> +	select REGMAP_I2C
> +	help
> +	---help---
> +	  This driver supports Silicon Labs 570/571/598/599 programmable
> +	  clock generators.
> +
>  config COMMON_CLK_S2MPS11
>  	tristate "Clock driver for S2MPS11 MFD"
>  	depends on MFD_SEC_CORE
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 7b11106..c0e94b3 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
>  obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
>  obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
>  obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
> +obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
>  obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
>  obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o
>  obj-$(CONFIG_CLK_PPC_CORENET)	+= clk-ppc-corenet.o
> diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c
> new file mode 100644
> index 0000000..c20dfce
> --- /dev/null
> +++ b/drivers/clk/clk-si570.c
> @@ -0,0 +1,517 @@
> +/*
> + * Driver for Silicon Labs Si570/Si571 Programmable XO/VCXO
> + *
> + * Copyright (C) 2010, 2011 Ericsson AB.
> + * Copyright (C) 2011 Guenter Roeck.
> + * Copyright (C) 2011 - 2013 Xilinx Inc.
> + *
> + * Author: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
> + *	   Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +/* Si570 registers */
> +#define SI570_REG_HS_N1		7
> +#define SI570_REG_N1_RFREQ0	8
> +#define SI570_REG_RFREQ1	9
> +#define SI570_REG_RFREQ2	10
> +#define SI570_REG_RFREQ3	11
> +#define SI570_REG_RFREQ4	12
> +#define SI570_REG_CONTROL	135
> +#define SI570_REG_FREEZE_DCO	137
> +#define SI570_DIV_OFFSET_7PPM	6
> +
> +#define HS_DIV_SHIFT		5
> +#define HS_DIV_MASK		0xe0
> +#define HS_DIV_OFFSET		4
> +#define N1_6_2_MASK		0x1f
> +#define N1_1_0_MASK		0xc0
> +#define RFREQ_37_32_MASK	0x3f
> +
> +#define SI570_MIN_FREQ		10000000L
> +#define SI570_MAX_FREQ		1417500000L
> +#define SI598_MAX_FREQ		525000000L
> +
> +#define FDCO_MIN		4850000000LL
> +#define FDCO_MAX		5670000000LL
> +
> +#define SI570_CNTRL_RECALL	(1 << 0)
> +#define SI570_CNTRL_FREEZE_M	(1 << 5)
> +#define SI570_CNTRL_NEWFREQ	(1 << 6)
> +
> +#define SI570_FREEZE_DCO	(1 << 4)
> +
> +/**
> + * struct clk_si570:
> + * @hw:	Clock hw struct
> + * @regmap:	Device's regmap
> + * @div_offset:	Rgister offset for dividers
> + * @max_freq:	Maximum frequency for this device
> + * @fxtal:	Factory xtal frequency
> + * @n1:		Clock divider N1
> + * @hs_div:	Clock divider HSDIV
> + * @rfreq:	Clock multiplier RFREQ
> + * @frequency:	Current output frequency
> + * @i2c_client:	I2C client pointer
> + */
> +struct clk_si570 {
> +	struct clk_hw hw;
> +	struct regmap *regmap;
> +	unsigned int div_offset;
> +	u64 max_freq;
> +	u64 fxtal;
> +	unsigned int n1;
> +	unsigned int hs_div;
> +	u64 rfreq;
> +	u64 frequency;
> +	struct i2c_client *i2c_client;
> +};
> +#define to_clk_si570(_hw)	container_of(_hw, struct clk_si570, hw)
> +
> +/**
> + * si570_get_divs() - Read clock dividers from HW
> + * @data:	Pointer to struct clk_si570
> + * @rfreq:	Fractional multiplier (output)
> + * @n1:		Divider N1 (output)
> + * @hs_div:	Divider HSDIV (output)
> + * Returns 0 on success, negative errno otherwise.
> + *
> + * Retrieve clock dividers and multipliers from the HW.
> + */
> +static int si570_get_divs(struct clk_si570 *data, u64 *rfreq,
> +		unsigned int *n1, unsigned int *hs_div)
> +{
> +	int err;
> +	u8 reg[6];
> +	u64 tmp;
> +
> +	err = regmap_bulk_read(data->regmap, SI570_REG_HS_N1 + data->div_offset,
> +			reg, ARRAY_SIZE(reg));
> +	if (err)
> +		return err;
> +
> +	*hs_div = ((reg[0] & HS_DIV_MASK) >> HS_DIV_SHIFT) + HS_DIV_OFFSET;
> +	*n1 = ((reg[0] & N1_6_2_MASK) << 2) + ((reg[1] & N1_1_0_MASK) >> 6) + 1;
> +	/* Handle invalid cases */
> +	if (*n1 > 1)
> +		*n1 &= ~1;
> +
> +	tmp = reg[1] & RFREQ_37_32_MASK;
> +	tmp = (tmp << 8) + reg[2];
> +	tmp = (tmp << 8) + reg[3];
> +	tmp = (tmp << 8) + reg[4];
> +	tmp = (tmp << 8) + reg[5];
> +	*rfreq = tmp;
> +
> +	return 0;
> +}
> +
> +/**
> + * si570_get_defaults() - Get default values
> + * @data:	Driver data structure
> + * @fout:	Factory frequency output
> + * Returns 0 on success, negative errno otherwise.
> + */
> +static int si570_get_defaults(struct clk_si570 *data, u64 fout)
> +{
> +	int err;
> +	u64 fdco;
> +
> +	regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_RECALL);
> +
> +	err = si570_get_divs(data, &data->rfreq, &data->n1, &data->hs_div);
> +	if (err)
> +		return err;
> +
> +	/*
> +	 * Accept optional precision loss to avoid arithmetic overflows.
> +	 * Acceptable per Silicon Labs Application Note AN334.
> +	 */
> +	fdco = fout * data->n1 * data->hs_div;
> +	if (fdco >= (1LL << 36))
> +		data->fxtal = div64_u64(fdco << 24, data->rfreq >> 4);
> +	else
> +		data->fxtal = div64_u64(fdco << 28, data->rfreq);
> +
> +	data->frequency = fout;
> +
> +	return 0;
> +}
> +
> +/**
> + * si570_update_rfreq() - Update clock multiplier
> + * @data:	Driver data structure
> + * Passes on regmap_bulk_write() return value.
> + */
> +static int si570_update_rfreq(struct clk_si570 *data)
> +{
> +	u8 reg[5];
> +
> +	reg[0] = ((data->n1 - 1) << 6) |
> +		((data->rfreq >> 32) & RFREQ_37_32_MASK);
> +	reg[1] = (data->rfreq >> 24) & 0xff;
> +	reg[2] = (data->rfreq >> 16) & 0xff;
> +	reg[3] = (data->rfreq >> 8) & 0xff;
> +	reg[4] = data->rfreq & 0xff;
> +
> +	return regmap_bulk_write(data->regmap, SI570_REG_N1_RFREQ0 +
> +			data->div_offset, reg, ARRAY_SIZE(reg));
> +}
> +
> +/**
> + * si570_calc_divs() - Caluclate clock dividers
> + * @frequency:	Target frequency
> + * @data:	Driver data structure
> + * @out_rfreq:	RFREG fractional multiplier (output)
> + * @out_n1:	Clock divider N1 (output)
> + * @out_hs_div:	Clock divider HSDIV (output)
> + * Returns 0 on success, negative errno otherwise.
> + *
> + * Calculate the clock dividers (@out_hs_div, @out_n1) and clock multiplier
> + * (@out_rfreq) for a given target @frequency.
> + */
> +static int si570_calc_divs(unsigned long frequency, struct clk_si570 *data,
> +		u64 *out_rfreq, unsigned int *out_n1, unsigned int *out_hs_div)
> +{
> +	int i;
> +	unsigned int n1, hs_div;
> +	u64 fdco, best_fdco = ULLONG_MAX;
> +	static const uint8_t si570_hs_div_values[] = { 11, 9, 7, 6, 5, 4 };
> +
> +	for (i = 0; i < ARRAY_SIZE(si570_hs_div_values); i++) {
> +		hs_div = si570_hs_div_values[i];
> +		/* Calculate lowest possible value for n1 */
> +		n1 = div_u64(div_u64(FDCO_MIN, hs_div), frequency);
> +		if (!n1 || (n1 & 1))
> +			n1++;
> +		while (n1 <= 128) {
> +			fdco = (u64)frequency * (u64)hs_div * (u64)n1;
> +			if (fdco > FDCO_MAX)
> +				break;
> +			if (fdco >= FDCO_MIN && fdco < best_fdco) {
> +				*out_n1 = n1;
> +				*out_hs_div = hs_div;
> +				*out_rfreq = div64_u64(fdco << 28, data->fxtal);
> +				best_fdco = fdco;
> +			}
> +			n1 += (n1 == 1 ? 1 : 2);
> +		}
> +	}
> +
> +	if (best_fdco == ULLONG_MAX)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static unsigned long si570_recalc_rate(struct clk_hw *hw,
> +		unsigned long parent_rate)
> +{
> +	int err;
> +	u64 rfreq, rate;
> +	unsigned int n1, hs_div;
> +	struct clk_si570 *data = to_clk_si570(hw);
> +
> +	err = si570_get_divs(data, &rfreq, &n1, &hs_div);
> +	if (err) {
> +		dev_err(&data->i2c_client->dev, "unable to recalc rate\n");

[ Not really helpful that you can not return an error here ]

> +		return data->frequency;
> +	}
> +
> +	rfreq = div_u64(rfreq, hs_div * n1);
> +	rate = (data->fxtal * rfreq) >> 28;
> +
> +	return rate;
> +}
> +
> +static long si570_round_rate(struct clk_hw *hw, unsigned long rate,
> +		unsigned long *parent_rate)
> +{
> +	int err;
> +	u64 rfreq;
> +	unsigned int n1, hs_div;
> +	struct clk_si570 *data = to_clk_si570(hw);
> +
> +	if (!rate)
> +		return 0;
> +
> +	if (div64_u64(abs(rate - data->frequency) * 10000LL,
> +				data->frequency) < 35) {
> +		rfreq = div64_u64((data->rfreq * rate) +
> +				div64_u64(data->frequency, 2), data->frequency);
> +		n1 = data->n1;
> +		hs_div = data->hs_div;
> +
> +	} else {
> +		err = si570_calc_divs(rate, data, &rfreq, &n1, &hs_div);
> +		if (err) {
> +			dev_err(&data->i2c_client->dev,
> +					"unable to round rate\n");
> +			return 0;
> +		}
> +	}
> +
> +	return rate;
> +}
> +
> +/**
> + * si570_set_frequency() - Adjust output frequency
> + * @data:	Driver data structure
> + * @frequency:	Target frequency
> + * Returns 0 on success.
> + *
> + * Update output frequency for big frequency changes (> 3,500 ppm).
> + */
> +static int si570_set_frequency(struct clk_si570 *data, unsigned long frequency)
> +{
> +	int err;
> +
> +	err = si570_calc_divs(frequency, data, &data->rfreq, &data->n1,
> +			&data->hs_div);
> +	if (err)
> +		return err;
> +
> +	/*
> +	 * The DCO reg should be accessed with a read-modify-write operation
> +	 * per AN334
> +	 */
> +	regmap_write(data->regmap, SI570_REG_FREEZE_DCO, SI570_FREEZE_DCO);
> +	regmap_write(data->regmap, SI570_REG_HS_N1 + data->div_offset,
> +			((data->hs_div - HS_DIV_OFFSET) << HS_DIV_SHIFT) |
> +			(((data->n1 - 1) >> 2) & N1_6_2_MASK));
> +	si570_update_rfreq(data);
> +	regmap_write(data->regmap, SI570_REG_FREEZE_DCO, 0);
> +	regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_NEWFREQ);
> +
> +	/* Applying a new frequency can take up to 10ms */
> +	usleep_range(10000, 10000);
> +
> +	return 0;
> +}
> +
> +/**
> + * si570_set_frequency_small() - Adjust output frequency
> + * @data:	Driver data structure
> + * @frequency:	Target frequency
> + * Returns 0 on success.
> + *
> + * Update output frequency for small frequency changes (< 3,500 ppm).
> + */
> +static int si570_set_frequency_small(struct clk_si570 *data,
> +				     unsigned long frequency)
> +{
> +	/*
> +	 * This is a re-implementation of DIV_ROUND_CLOSEST
> +	 * using the div64_u64 function lieu of letting the compiler
> +	 * insert EABI calls
> +	 */
> +	data->rfreq = div64_u64((data->rfreq * frequency) +
> +			div_u64(data->frequency, 2), data->frequency);
> +	regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_FREEZE_M);
> +	si570_update_rfreq(data);
> +	regmap_write(data->regmap, SI570_REG_CONTROL, 0);
> +
> +	return 0;
> +}
> +
> +static int si570_set_rate(struct clk_hw *hw, unsigned long rate,
> +		unsigned long parent_rate)
> +{
> +	struct clk_si570 *data = to_clk_si570(hw);
> +	struct i2c_client *client = data->i2c_client;
> +	int err;
> +
> +	if (rate < SI570_MIN_FREQ || rate > data->max_freq) {
> +		dev_warn(&client->dev,
> +			"requested frequency %lu Hz is out of range\n", rate);

Shouldn't this be dev_err ?

> +		return -EINVAL;
> +	}
> +
> +	if (div64_u64(abs(rate - data->frequency) * 10000LL,
> +				data->frequency) < 35)
> +		err = si570_set_frequency_small(data, rate);
> +	else
> +		err = si570_set_frequency(data, rate);
> +
> +	if (err)
> +		return err;
> +
> +	data->frequency = rate;
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops si570_clk_ops = {
> +	.recalc_rate = si570_recalc_rate,
> +	.round_rate = si570_round_rate,
> +	.set_rate = si570_set_rate,
> +};
> +
> +static bool si570_regmap_is_volatile(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case 135:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static bool si570_regmap_is_writeable(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case 7 ... 18:
> +	case 135:
> +	case 137:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static struct regmap_config si570_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +	.max_register = 137,
> +	.writeable_reg = si570_regmap_is_writeable,
> +	.volatile_reg = si570_regmap_is_volatile,
> +};
> +
> +static int si570_probe(struct i2c_client *client,
> +		const struct i2c_device_id *id)
> +{
> +	struct clk_si570 *data;
> +	struct clk_init_data init;
> +	struct clk *clk;
> +	u32 initial_fout, factory_fout;
> +	int err;
> +
> +	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	init.ops = &si570_clk_ops;
> +	init.flags = CLK_IS_ROOT;
> +	init.num_parents = 0;
> +	data->hw.init = &init;
> +	data->max_freq = id->driver_data;
> +	data->i2c_client = client;
> +
> +	if (of_property_read_bool(client->dev.of_node,
> +				"temperature-stability-7ppm"))
> +		data->div_offset = SI570_DIV_OFFSET_7PPM;
> +
Just noticed that you dropped platform data support. Doesn't matter much for me
right now, but in my previous company we used the chip on an x86 system which
does not support devicetree. Would be nice to keep it and derive platform data
from devicetree data if provided, like other drivers do it.

The 7ppm option is only relevant for si570/si751 and not supported on
si598/si599. You should mention that in the bindings document and check for it.
Even better would be if it can be auto-detected; in that case you would not need
the property at all. Unfortunately I don't have access to a chip, so I have
no idea if that is possible and can not check it myself either.

> +	if (of_property_read_string(client->dev.of_node, "clock-output-names",
> +			&init.name))
> +		init.name = client->dev.of_node->name;
> +
> +	err = of_property_read_u32(client->dev.of_node, "factory-fout",
> +			&factory_fout);
> +	if (err) {
> +		dev_err(&client->dev, "'factory-fout' property missing\n");
> +		return err;
> +	}
> +
> +	data->regmap = devm_regmap_init_i2c(client, &si570_regmap_config);
> +	if (IS_ERR(data->regmap)) {
> +		dev_err(&client->dev, "failed to allocate register map\n");
> +		return PTR_ERR(data->regmap);
> +	}
> +
> +	i2c_set_clientdata(client, data);
> +	err = si570_get_defaults(data, factory_fout);
> +	if (err)
> +		return err;
> +
> +	clk = devm_clk_register(&client->dev, &data->hw);
> +	if (IS_ERR(clk)) {
> +		dev_err(&client->dev, "clock registration failed\n");
> +		return PTR_ERR(clk);
> +	}
> +	err = of_clk_add_provider(client->dev.of_node, of_clk_src_simple_get,
> +			clk);
> +	if (err) {
> +		dev_err(&client->dev, "unable to add clk provider\n");
> +		return err;
> +	}
> +
> +	/*
> +	 * Read the requested initial fout from either platform data or the
> +	 * device tree
> +	 */

But you don't do anything with platform data.

> +	if (!of_property_read_u32(client->dev.of_node, "clock-frequency",
> +				&initial_fout)) {
> +		err = clk_set_rate(clk, initial_fout);
> +		if (err)
> +			dev_warn(&client->dev,
> +					"unable to set initial output frequency %u: %d\n",
> +					initial_fout, err);

No bailout ?

Also it seems that this generates two error messages, once in the code which
experiences the error and once here.

Maybe it would be better to just bail out and return the error.
After all, something is seriously wrong and the system won't operate
as specified.

> +	}
> +
> +	/* Display a message indicating that we've successfully registered */
> +	dev_info(&client->dev, "registered, current frequency %llu Hz\n",
> +			data->frequency);
> +
> +	return 0;
> +}
> +
> +static int si570_remove(struct i2c_client *client)
> +{
> +	struct clk_si570 *data = i2c_get_clientdata(client);
> +
> +	of_clk_del_provider(client->dev.of_node);
> +	clk_unregister(data->hw.clk);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id si570_id[] = {
> +	{ "si570", SI570_MAX_FREQ },
> +	{ "si571", SI570_MAX_FREQ },
> +	{ "si598", SI598_MAX_FREQ },
> +	{ "si599", SI598_MAX_FREQ },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, si570_id);
> +
> +static const struct of_device_id clk_si570_of_match[] = {
> +	{ .compatible = "silabs,si570" },
> +	{ .compatible = "silabs,si571" },
> +	{ .compatible = "silabs,si598" },
> +	{ .compatible = "silabs,si599" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, clk_si570_of_match);
> +
> +static struct i2c_driver si570_driver = {
> +	.driver = {
> +		.name	= "si570",
> +		.of_match_table = of_match_ptr(clk_si570_of_match),
> +	},
> +	.probe		= si570_probe,
> +	.remove		= si570_remove,
> +	.id_table	= si570_id,
> +};
> +module_i2c_driver(si570_driver);
> +
> +MODULE_AUTHOR("Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>");
> +MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xxxxxxxxxx");
> +MODULE_DESCRIPTION("Si570 driver");
> +MODULE_LICENSE("GPL");
> -- 
> 1.8.4
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux