On Wed, 2013-09-18 at 16:09 -0700, Sören Brinkmann wrote:
> On Wed, Sep 18, 2013 at 04:02:41PM -0700, Joe Perches wrote:
> > On Wed, 2013-09-18 at 15:43 -0700, Soren Brinkmann wrote:
> > > Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
> > > The devices generate low-jitter clock signals and are reprogrammable via
> > > an I2C interface.
> > []
> > > v2:
> > []
> > > - use 10000 as MIN and MAX value in usleep_range
> > []
> > > diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c
> > []
> > > +static int si570_set_frequency(struct clk_si570 *data, unsigned long frequency)
> > > +{
> > []
> > > + /* Applying a new frequency can take up to 10ms */
> > > + usleep_range(10000, 10000);
> >
> > Generally it's nicer to have an actual range for usleep_range.
> Well, as I said in the discussion with Guenther. I'm flexible and nobody
> objected when I said to make both equal. A real range doesn't make sense
> here though, but I don't know what's common practice for cases like
> this.
udelay is normal, but I guess you don't need atomic context.
> > Is there a bit you could periodically poll to see
> > if the new frequency has been set or is stable so
> > that a 10ms delay isn't always used?
> Unfortunately not.
Thanks. I suppose I should read the datasheets before asking.
http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
(page 12)
Anyway, perhaps si570_set_frequency_small needs a delay too.'
The 570 datasheet says it needs a 100uS delay.
> On Wed, 2013-09-18 at 15:43 -0700, Soren Brinkmann wrote:
> Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
> The devices generate low-jitter clock signals and are reprogrammable via
> an I2C interface.
> []
> +static int si570_set_frequency_small(struct clk_si570 *data,
> + unsigned long frequency)
> +{
> + /*
> + * This is a re-implementation of DIV_ROUND_CLOSEST
> + * using the div64_u64 function lieu of letting the compiler
> + * insert EABI calls
> + */
> + data->rfreq = div64_u64((data->rfreq * frequency) +
> + div_u64(data->frequency, 2), data->frequency);
> + regmap_write(data->regmap, SI570_REG_CONTROL, SI570_CNTRL_FREEZE_M);
> + si570_update_rfreq(data);
> + regmap_write(data->regmap, SI570_REG_CONTROL, 0);
> +
> + return 0;
> +}
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
