* Tero Kristo <t-kristo@xxxxxx> [130829 06:24]:
> The OMAP clock driver now supports DPLL clock type. This patch also
> adds support for DT DPLL nodes.
...
> +- reg-names : array of the register names for controlling the device, sorted
> + in the same order as the reg property.
> + "control" - contains the control register base address
> + "idlest" - contains the idle status register base address
> + "autoidle" - contains the autoidle register base address
> + "mult-div1" - contains the multiplier / divider register base address
FYI, looks like there's some tab vs spaces issue with the
formatting above.
> +Examples:
> + dpll_core_ck: dpll_core_ck@44e00490 {
> + #clock-cells = <0>;
> + compatible = "ti,omap4-dpll-core-clock";
> + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> + reg = <0x44e00490 0x4>, <0x44e0045c 0x4>, <0x0 0x4>,
> + <0x44e00468 0x4>;
> + reg-names = "control", "idlest", "autoidle", "mult-div1";
> + };
> +
> + dpll2_ck: dpll2_ck@48004004 {
> + #clock-cells = <0>;
> + compatible = "ti,omap3-dpll-clock";
> + clocks = <&sys_ck>, <&dpll2_fck>;
> + ti,modes = <0xa2>;
> + reg = <0x48004004 0x4>, <0x48004024 0x4>, <0x48004034 0x4>,
> + <0x48004040 0x4>;
> + reg-names = "control", "idlest", "autoidle", "mult-div1";
> + ti,clkdm-name = "dpll2_clkdm";
> + };
Do you need the reg-names at all? You may be able to do that
automatically in the driver based on the compatible flags if
you only have few different types.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
