Hello all, Thank you for your review. I have revised v1 driver. Please give your feedback at that time. This patch is second revision for Capella CM36651 proximity and RGB light sensor driver. The driver exposes five channels: Red, Green, Blue, Clear and proximity. It also support detection proximity event. This driver supports: - Event: rising and falling proximity events. - Reading channels through read_raw_callback. v2 changed below: - Add a new entry in alphabetical order at Kconfig. - Use #define register and commands. - Use CM36651_* prefix. - Use i2c_smbus_* APIs. - Fixed cm36651_read_output() function. - Code cleanup >From 493802a4f3788579789b6f03dffaaf3a0d9fc225 Mon Sep 17 00:00:00 2001 From: Beomho Seo <beomho.seo@xxxxxxxxxxx> Date: Tue, 17 Sep 2013 11:59:47 +0900 Subject: [PATCH 0/2] *** SUBJECT HERE *** *** BLURB HERE *** Beomho Seo (2): iio: cm36651: Add CM36651 proximity/light sensor driver DT: Add binding documentation for CM36651 proximity/light sensor .../devicetree/bindings/iio/light/cm36651.txt | 24 + .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/iio/light/Kconfig | 11 + drivers/iio/light/cm36651.c | 591 ++++++++++++++++++++ 4 files changed, 627 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt create mode 100644 drivers/iio/light/cm36651.c -- 1.7.9.5 Best regards, -- Beomho Seo, Assistant Engineer System S/W Lab., S/W Platform Team, Software Center Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
