Re: [PATCH v9 2/3] DMA: Freescale: Add new 8-channel DMA engine device tree nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 2013-09-12 at 18:15 +0100, Mark Rutland wrote:
> On Tue, Sep 03, 2013 at 10:01:50AM +0100, Hongbo Zhang wrote:
> > On 09/02/2013 11:58 PM, Mark Rutland wrote:
> > > May some channels be unusable for some reason, or will all eight
> > > channels be wired on any given Elo3 DMA?
> > Sorry, not get your point clearly, maybe you are clear now because of my
> > previous explanations.
> 
> I assume that on any El03 DMA, there won't be a case where you can't
> describe the channel at 0x80, for instance. It will always be present
> (but it might not be wired up to anything any therefore be useful)?
> 
> This was related to my concerns about the status register description --
> if the channels at 0x0,0x80,0x100,0x180 weren't wired, what would get
> described in the dt? I guess that would never actually happen because
> all 8 channels must always be present in the Elo3 IP block.

If a channel is not usable for whatever reason (other than that "used
for a different fixed purpose and thus described with a different
compatible" thing that was mentioned earlier in these threads), wouldn't
it just have status = "disabled" or similar, or be absent?

-Scott



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux