* Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> [130912 11:43]: > The pinmux is specified in am335x-bone-common.dtsi to be reused by the eMMC cape. > > Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/am335x-bone-common.dtsi | 22 ++++++++++++++++++++++ > arch/arm/boot/dts/am335x-boneblack.dts | 14 ++++++++++++++ > 2 files changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi > index 0d95d54..bc8d1a2 100644 > --- a/arch/arm/boot/dts/am335x-bone-common.dtsi > +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi > @@ -113,6 +113,21 @@ > 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ > >; > }; > + > + emmc_pins: pinmux_emmc_pins { > + pinctrl-single,pins = < > + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk, INPUT_PULLUP | MODE2 */ > + 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd, INPUT_PULLUP | MODE2 */ > + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0, INPUT_PULLUP | MODE1 */ > + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1, INPUT_PULLUP | MODE1 */ > + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2, INPUT_PULLUP | MODE1 */ > + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3, INPUT_PULLUP | MODE1 */ > + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4, INPUT_PULLUP | MODE1 */ > + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5, INPUT_PULLUP | MODE1 */ > + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6, INPUT_PULLUP | MODE1 */ > + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7, INPUT_PULLUP | MODE1 */ > + >; > + }; > }; > > ocp { Here you can now use just the defines to make it a bit shorter: 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html