This matches the vendor 3.8.x configuration that is shipping with the boards. The LED layout is now: USR0: heartbeat USR1: mmc0 (micro-SD slot) USR2: cpu0 USR3: mmc1 (eMMC) The cpu0 triggers was put in between the mmc triggers to make is easier to see where the disk activity is. Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 303df81..adce9fe 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -204,12 +204,14 @@ led@4 { label = "beaglebone:green:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; default-state = "off"; }; }; -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html