On 09/12/2013 10:42 AM, Koen Kooi wrote:
> This matches the vendor 3.8.x configuration that is shipping with the boards.
>
> The LED layout is now:
>
> USR0: heartbeat
> USR1: mmc0 (micro-SD slot)
> USR2: cpu0
> USR3: mmc1 (eMMC)
>
> The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
nitpick: sinbetween/in between/
> where the disk activity is.
>
> Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 80407ff..3057f30 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -203,12 +203,14 @@
> led@4 {
> label = "beaglebone:green:usr2";
> gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "cpu0";
> default-state = "off";
> };
>
> led@5 {
> label = "beaglebone:green:usr3";
> gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc1";
> default-state = "off";
> };
> };
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
