The patch adds the DT binding documentation for Samsung Exynos5 SoC series imaging subsystem (FIMC-IS). Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 46 ++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 0000000..5611401 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,46 @@ +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) +------------------------------------------------------ + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node +------------ + +Required properties: + +- compatible : must be "samsung,exynos5250-fimc-is" +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : parent interrupt controller +- interrupts : fimc-is interrupt to the parent interrupt controller +- clocks : list of clock specifiers, corresponding to entries in + clock-names property +- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1", + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries, + matching entries in the clocks property +- samsung,pmu : phandle to the Power Management Unit (PMU) node + +i2c-isp (ISP I2C bus controller) nodes +------------------------------------------ + +Required properties: + +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212, + Exynos4412 and Exynos5250 SoCs +- reg : physical base address and length of the registers set +- clocks : must contain gate clock specifier for this controller +- clock-names : must contain "i2c_isp" entry + +For the i2c-isp node, it is required to specify a pinctrl state named "default", +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. + +Device tree nodes of the image sensors controlled directly by the FIMC-IS +firmware must be child nodes of their corresponding ISP I2C bus controller node. +The data link of these image sensors must be specified using the common video +interfaces bindings, defined in video-interfaces.txt. -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
