Hi Kishon,
On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
> There can be systems which does not have a external usb_phy, so get
> usb_phy only if usb-phy property is added in the case of dt boot or if
> platform_data indicates the presence of PHY. Also remove checking if
> return value is -ENXIO since it's now changed to always enable usb_phy layer.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> drivers/usb/dwc3/Kconfig | 1 +
> drivers/usb/dwc3/core.c | 60 +++++++++++++++++---------------------
> drivers/usb/dwc3/platform_data.h | 1 +
> 3 files changed, 28 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index f969ea2..cfc16dd 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -2,6 +2,7 @@ config USB_DWC3
> tristate "DesignWare USB3 DRD Core Support"
> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
> depends on EXTCON
> + select USB_PHY
> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
> help
> Say Y or M here if your system has a Dual Role SuperSpeed
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 474162e..428c29e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -387,16 +387,38 @@ static int dwc3_probe(struct platform_device *pdev)
> if (node) {
> dwc->maximum_speed = of_usb_get_maximum_speed(node);
>
> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
> + if (of_property_read_bool(node, "usb-phy")) {
> + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
> + "usb-phy", 0);
> + if (IS_ERR(dwc->usb2_phy))
> + return PTR_ERR(dwc->usb2_phy);
> + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
> + "usb-phy", 1);
> + if (IS_ERR(dwc->usb3_phy))
> + return PTR_ERR(dwc->usb3_phy);
Some DWC3 instances use only usb2_phy. e.g. on DRA7 the 2nd dwc3 instance doesn't use usb3_phy.
This needs to be a valid case and driver shouldn't error out.
> + } else {
> + dwc->usb2_phy = NULL;
> + dwc->usb3_phy = NULL;
> + }
>
> dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
> dwc->dr_mode = of_usb_get_dr_mode(node);
> } else if (pdata) {
> dwc->maximum_speed = pdata->maximum_speed;
>
> - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
> + if (pdata->has_phy) {
> + dwc->usb2_phy = devm_usb_get_phy(dev,
> + USB_PHY_TYPE_USB2);
> + if (IS_ERR(dwc->usb2_phy))
> + return PTR_ERR(dwc->usb2_phy);
> + dwc->usb3_phy = devm_usb_get_phy(dev,
> + USB_PHY_TYPE_USB3);
> + if (IS_ERR(dwc->usb3_phy))
> + return PTR_ERR(dwc->usb3_phy);
same here?
> + } else {
> + dwc->usb2_phy = NULL;
> + dwc->usb3_phy = NULL;
> + }
>
> dwc->needs_fifo_resize = pdata->tx_fifo_resize;
> dwc->dr_mode = pdata->dr_mode;
> @@ -409,36 +431,6 @@ static int dwc3_probe(struct platform_device *pdev)
> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
> dwc->maximum_speed = USB_SPEED_SUPER;
>
> - if (IS_ERR(dwc->usb2_phy)) {
> - ret = PTR_ERR(dwc->usb2_phy);
> -
> - /*
> - * if -ENXIO is returned, it means PHY layer wasn't
> - * enabled, so it makes no sense to return -EPROBE_DEFER
> - * in that case, since no PHY driver will ever probe.
> - */
> - if (ret == -ENXIO)
> - return ret;
> -
> - dev_err(dev, "no usb2 phy configured\n");
> - return -EPROBE_DEFER;
> - }
> -
> - if (IS_ERR(dwc->usb3_phy)) {
> - ret = PTR_ERR(dwc->usb3_phy);
> -
> - /*
> - * if -ENXIO is returned, it means PHY layer wasn't
> - * enabled, so it makes no sense to return -EPROBE_DEFER
> - * in that case, since no PHY driver will ever probe.
> - */
> - if (ret == -ENXIO)
> - return ret;
> -
> - dev_err(dev, "no usb3 phy configured\n");
> - return -EPROBE_DEFER;
> - }
> -
> dwc->xhci_resources[0].start = res->start;
> dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
> DWC3_XHCI_REGS_END;
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 7db34f0..5a5e068 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -24,4 +24,5 @@ struct dwc3_platform_data {
> enum usb_device_speed maximum_speed;
> enum usb_dr_mode dr_mode;
> bool tx_fifo_resize;
> + bool has_phy;
> };
>
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
