On Thursday 12 September 2013 02:57 PM, Vivek Gautam wrote:
> Hi Kishon,
>
>
> On Mon, Sep 2, 2013 at 9:13 PM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
>> power_on and power_off the following APIs are used phy_init(), phy_exit(),
>> phy_power_on() and phy_power_off().
>>
>> However using the old USB phy library wont be removed till the PHYs of all
>> other SoC's using dwc3 core is adapted to the Generic PHY Framework.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
>> drivers/usb/dwc3/Kconfig | 1 +
>> drivers/usb/dwc3/core.c | 49 ++++++++++++++++++++++++
>> drivers/usb/dwc3/core.h | 7 ++++
>> 4 files changed, 61 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>> index e807635..471366d 100644
>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>> @@ -6,11 +6,13 @@ Required properties:
>> - compatible: must be "snps,dwc3"
>> - reg : Address and length of the register set for the device
>> - interrupts: Interrupts used by the dwc3 controller.
>> +
>> +Optional properties:
>> - usb-phy : array of phandle for the PHY device. The first element
>> in the array is expected to be a handle to the USB2/HS PHY and
>> the second element is expected to be a handle to the USB3/SS PHY
>> -
>> -Optional properties:
>> + - phys: from the *Generic PHY* bindings
>> + - phy-names: from the *Generic PHY* bindings
>> - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>>
>> This is usually a subnode to DWC3 glue to which it is connected.
>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> index cfc16dd..ad7ce83 100644
>> --- a/drivers/usb/dwc3/Kconfig
>> +++ b/drivers/usb/dwc3/Kconfig
>> @@ -3,6 +3,7 @@ config USB_DWC3
>> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
>> depends on EXTCON
>> select USB_PHY
>> + select GENERIC_PHY
>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>> help
>> Say Y or M here if your system has a Dual Role SuperSpeed
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 428c29e..485d365 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>>
>> usb_phy_init(dwc->usb2_phy);
>> usb_phy_init(dwc->usb3_phy);
>> +
>> + if (dwc->usb2_generic_phy)
>> + phy_init(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_init(dwc->usb3_generic_phy);
>> +
>> mdelay(100);
>>
>> /* Clear USB3 PHY reset */
>> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
>> {
>> usb_phy_shutdown(dwc->usb2_phy);
>> usb_phy_shutdown(dwc->usb3_phy);
>> +
>> + if (dwc->usb2_generic_phy)
>> + phy_power_off(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_power_off(dwc->usb3_generic_phy);
>> }
>>
>> #define DWC3_ALIGN_MASK (16 - 1)
>> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
>> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> }
>>
>> + if (of_property_read_bool(node, "phys") || pdata->has_phy) {
>> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>> + if (IS_ERR(dwc->usb2_generic_phy)) {
>> + dev_err(dev, "no usb2 phy configured yet");
>> + return PTR_ERR(dwc->usb2_generic_phy);
>> + }
>
> I have a doubt here.
> As i can see in the current phy drivers structuring, for OMAP there
> are two phy drivers :
> omap phy-omap-usb2 (talking to musb controller)
It talks to dwc3 controller also ;-)
> and phy-omap-usb3(talking to dwc3 controller).
>
> Now dwc3 controller requests both usb2-phy (supported by phy-omap-usb2
> ?) and usb3-phy (supported by phy-omap-usb3 ?).
> But phy-omap-usb2 is not the one designated to talk to DWC3
> controller, then why does still DWC3 want to request usb2-phy, which
> end of the day will be phy-omap-usb2.
> May be i am wrong here since i don't have knowledge about OMAP h/w architecture.
>
> Is it like phy-omap-usb2 includes UTMI phys for both musb controller
> as well as dwc3 controller ?
right. It's needed for dwc3 too. The same USB2 PHY IP is used for both MUSB in
OMAP2+ platforms and DWC3 in OMAP5.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
