From: Tang Yuantian <yuantian.tang@xxxxxxxxxxxxx> The following SoCs will be affected: p2041, p3041, p4080, p5020, p5040, b4420, b4860, t4240 Signed-off-by: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx> Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx> --- v4: - add binding document - update compatible string - update the reg property v3: - fix typo v2: - add t4240, b4420, b4860 support - remove pll/4 clock from p2041, p3041 and p5020 board .../devicetree/bindings/clock/corenet-clock.txt | 80 +++++++++++++++ arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 34 ++++++- arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi | 2 + arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 34 ++++++- arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 59 ++++++++++- arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 59 ++++++++++- arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 111 ++++++++++++++++++++- arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi | 8 ++ arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 41 +++++++- arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 2 + arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 59 ++++++++++- arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi | 4 + arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 84 +++++++++++++++- arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi | 12 +++ 17 files changed, 593 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/corenet-clock.txt diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt new file mode 100644 index 0000000..51eab75 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt @@ -0,0 +1,80 @@ +Device Tree Clock bindings for Freescale PowerPC corenet platform + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one or more of the following: + - "fsl,<chip>-clockgen": for chip specific clock block + - "fsl,qoriq-clockgen-[1,2].0": for chassis 1.0 and 2.0 clock + block respectively. + - "fsl,qoriq-chassis[1,2]-core-pll" - for a core PLL clock + - "fsl,qoriq-chassis[1,2]-core-mux" - for a core multiplexer clock. + Divided from the core PLL clock + - "fixed-clock" - from common clock binding; should be output clock + of oscillator +- reg : shall be the control register offset from clock block base address. +- clocks : shall be the input parent clock phandle for the clock. +- #clock-cells : from common clock binding; shall be set to 0 or 1. +- clock-names : from common clock binding +- clock-output-names : from common clock binding + +Example for clock provider: + +/ { + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + }; + } + +Example for clock consumer: + +/ { + cpu0: PowerPC,e5500@0 { + ... + clocks = <&mux0>; + ... + }; + } diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index 5a6615d..69e651e 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -85,7 +85,39 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0"; + compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0", + "fixed-clock"; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis2-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux0"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi index 7b4426e..a11126b 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -62,11 +62,13 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index e5cf6c8..6fa242f 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -129,7 +129,39 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0"; + compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0", + "fixed-clock"; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis2-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux0"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi index 5263fa4..185a231 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -62,21 +62,25 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; + clocks = <&mux0>; next-level-cache = <&L2>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; + clocks = <&mux0>; next-level-cache = <&L2>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index dc6cc5a..358c36d 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -305,9 +305,66 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index 7a2697d..22f3b14 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 3fa1e22..87030ce 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -332,9 +332,66 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index c9ca2c3..468e8be 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -82,6 +82,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -90,6 +91,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -98,6 +100,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -106,6 +109,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 34769a7..7ecefb3 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -352,9 +352,118 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll2", "pll2-div2"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll3", "pll3-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; + + mux4: mux4@80 { + #clock-cells = <0>; + reg = <0x80 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux4"; + }; + + mux5: mux5@a0 { + #clock-cells = <0>; + reg = <0xa0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux5"; + }; + + mux6: mux6@c0 { + #clock-cells = <0>; + reg = <0xc0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux6"; + }; + + mux7: mux7@e0 { + #clock-cells = <0>; + reg = <0xe0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2_0", "pll2_1", "pll3_0", "pll3_1"; + clock-output-names = "cmux7"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index 493d9a0..0040b5a 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e500mc@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e500mc@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e500mc@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e500mc@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; @@ -113,6 +117,7 @@ cpu4: PowerPC,e500mc@4 { device_type = "cpu"; reg = <4>; + clocks = <&mux4>; next-level-cache = <&L2_4>; L2_4: l2-cache { next-level-cache = <&cpc>; @@ -121,6 +126,7 @@ cpu5: PowerPC,e500mc@5 { device_type = "cpu"; reg = <5>; + clocks = <&mux5>; next-level-cache = <&L2_5>; L2_5: l2-cache { next-level-cache = <&cpc>; @@ -129,6 +135,7 @@ cpu6: PowerPC,e500mc@6 { device_type = "cpu"; reg = <6>; + clocks = <&mux6>; next-level-cache = <&L2_6>; L2_6: l2-cache { next-level-cache = <&cpc>; @@ -137,6 +144,7 @@ cpu7: PowerPC,e500mc@7 { device_type = "cpu"; reg = <7>; + clocks = <&mux7>; next-level-cache = <&L2_7>; L2_7: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index bc3ae5a..3044089 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -337,9 +337,48 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 8df47fc..fe1a2e6 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -88,6 +88,7 @@ cpu0: PowerPC,e5500@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -96,6 +97,7 @@ cpu1: PowerPC,e5500@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index a91897f..682787b 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -297,9 +297,66 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; + compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0", + "fixed-clock"; reg = <0xe1000 0x1000>; clock-frequency = <0>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis1-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-chassis1-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0_0", "pll0_1", "pll1_0", "pll1_1"; + clock-output-names = "cmux3"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index 40ca943..3674686 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -81,6 +81,7 @@ cpu0: PowerPC,e5500@0 { device_type = "cpu"; reg = <0>; + clocks = <&mux0>; next-level-cache = <&L2_0>; L2_0: l2-cache { next-level-cache = <&cpc>; @@ -89,6 +90,7 @@ cpu1: PowerPC,e5500@1 { device_type = "cpu"; reg = <1>; + clocks = <&mux1>; next-level-cache = <&L2_1>; L2_1: l2-cache { next-level-cache = <&cpc>; @@ -97,6 +99,7 @@ cpu2: PowerPC,e5500@2 { device_type = "cpu"; reg = <2>; + clocks = <&mux2>; next-level-cache = <&L2_2>; L2_2: l2-cache { next-level-cache = <&cpc>; @@ -105,6 +108,7 @@ cpu3: PowerPC,e5500@3 { device_type = "cpu"; reg = <3>; + clocks = <&mux3>; next-level-cache = <&L2_3>; L2_3: l2-cache { next-level-cache = <&cpc>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index bd611a9..b90a8c6 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -368,8 +368,90 @@ }; clockgen: global-utilities@e1000 { - compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; + compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0", + "fixed-clock"; reg = <0xe1000 0x1000>; + clock-output-names = "sysclk"; + #clock-cells = <0>; + #address-cells = <1>; + #size-cells = <1>; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll2", "pll2-div2", "pll2-div4"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll3", "pll3-div2", "pll3-div4"; + }; + + pll4: pll4@880 { + #clock-cells = <1>; + reg = <0x880 0x4>; + compatible = "fsl,qoriq-chassis2-core-pll"; + clocks = <&clockgen>; + clock-output-names = "pll4", "pll4-div2", "pll4-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-chassis2-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2", + "pll2_0", "pll2_1", "pll2_2"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-chassis2-core-mux"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2", + "pll2_0", "pll2_1", "pll2_2"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-chassis2-core-mux"; + clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>, + <&pll4 0>, <&pll4 1>, <&pll4 2>; + clock-names = "pll3_0", "pll3_1", "pll3_2", + "pll4_0", "pll4_1", "pll4_2"; + clock-output-names = "cmux2"; + }; }; rcpm: global-utilities@e2000 { diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index a93c55a..0b8ccc5 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -67,61 +67,73 @@ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; + clocks = <&mux0>; next-level-cache = <&L2_1>; }; cpu4: PowerPC,e6500@8 { device_type = "cpu"; reg = <8 9>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu5: PowerPC,e6500@10 { device_type = "cpu"; reg = <10 11>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu6: PowerPC,e6500@12 { device_type = "cpu"; reg = <12 13>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu7: PowerPC,e6500@14 { device_type = "cpu"; reg = <14 15>; + clocks = <&mux1>; next-level-cache = <&L2_2>; }; cpu8: PowerPC,e6500@16 { device_type = "cpu"; reg = <16 17>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu9: PowerPC,e6500@18 { device_type = "cpu"; reg = <18 19>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu10: PowerPC,e6500@20 { device_type = "cpu"; reg = <20 21>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; cpu11: PowerPC,e6500@22 { device_type = "cpu"; reg = <22 23>; + clocks = <&mux2>; next-level-cache = <&L2_3>; }; }; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html