Re: [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Op 10 sep. 2013, om 21:24 heeft Joel Fernandes <joelf@xxxxxx> het volgende geschreven:

> Here are last few patches required to add EDMA and MMC/SPI support for AM33xx.
> 
> Now that all dependent DMA patches and fixes are in linux next or mainline, except
> for [1] which should go in for 3.12 -rc cycle, it is safe to enable MMC and SPI support
> and this patch series enables it. These are originally Matt Porter's patches with
> changes to make it work with recent kernels, addition of irq, memory resources and
> enable other extra properties.
> 
> These patches should cleanly apply on master branch after Koen's patch [2] for basic
> BBB DT support is applied.
> 
> MMC support is enabled for: Beaglebone, AM335x EVM and EVM-SK boards. MMC support
> for BBB is intentionally not added due to custom fixes and other patches that are
> in Koen's tree and which will be separately submitted by him.

Correct, but your patches for MMC support on BBW are missing the card detect entries to make it hotplug work.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux