Hi Kumar,
On Fri, 2013-08-30 at 10:21 -0500, Kumar Gala wrote:
> On Aug 29, 2013, at 12:26 PM, Ivan T. Ivanov wrote:
<snip>
> >>> +
> >>> +Optional properties :
> >>> + - Child nodes conforming to i2c bus binding
> >>> + - clock-frequency : Desired I2C bus clock frequency in Hz. If
> >>> + not set thedefault frequency is 100kHz
> >>> + - qcom,src-freq : Frequency of the source clocking this bus in Hz.
> >>> + Divider value is set based on soruce-frequency and
> >>> + desired I2C bus frequency. If this value is not
> >>> + provided, the source clock is assumed to be running
> >>> + at 19.2 MHz.
> >>
> >> I'd spell out frequency instead of 'freq' to be consistent with 'clock-frequency'
> >
> > ok.
> >
> >>
> >> Is the frequency of the 'iface' clock? Can we not use clk_get_rate?
> >
> > It is for 'core' clock. I think that for higher I2C bus frequencies,
> > 'core' clock have to be higher, but I am not sure what is relation.
>
> Ok, can we use clk_get_rate on the 'core' clk to get its frequency instead of needing a DT prop for it?
Probably I didn't explain it well. The 'core' clock have to be
accelerated before higher bus frequencies could be achieved.
>
> >
> >>
> >>> +
> >>> +Aliases: An alias may optionally be used to bind the I2C controller
> >>> +to bus number. Aliases are of the form i2c<n> where <n> is an integer
> >>> +representing the bus number to use.
> >>> +
> >>> +Example:
> >>> +
> >>> + aliases {
> >>> + i2c0 = &i2c_A;
> >>> + i2c1 = &i2c_B;
> >>> + i2c2 = &i2c_C;
> >>> + };
> >>
> >> What is the purpose here?
> >
> > Define on which I2C bus this controller operate. I2C client
> > drivers usually do i2c_get_adapter(bus_number) before its
> > registration. This is for drivers before invention of
> > of_i2c_register_devices(), I believe.
>
> Since this is for upstream why dont we use of_i2c_register_devices() and remove this stuff related to aliases.
Adapter driver already is using of_i2c_register_devices(). Also OF
helper function will/or is already part of i2c_register_adapter().
Attempt here was to make it compatible with older i2c client drivers.
Regards,
Ivan
>
> - k
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
