On Sun, Sep 08, 2013 at 01:12:26PM +0200, Koen Kooi wrote: > The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, > so create a common dtsi both can use. > > IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver > after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead > of 1.8. > > MMC support for AM335x still isn't in, so only the LDO change has been added. > > Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> Tested-by: Matt Porter <matt.porter@xxxxxxxxxx> Works fine for me on tip and 3.11. I did notice a regression in musb (worked on 3.11, now failing to probe but this is not related to your new dts as it happens on am335x-bone.dts too, assuming merge window volatility). One nit, git-am picked up a whitespace error on that extra line at EOF so you should trim that out. Only thing is...for a clear bug like this that will destroy hardware, it should be marked Cc: stable@xxxxxxxxxxxxxxx to be picked up in stable. -Matt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html