[PATCH v2 11/12] ARM: dts: exynos5440: convert magic numbers to macros in clock bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The patch replaces magic numbers with macros defined in DT header
in exynos5440 clock bindings.

Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
 .../devicetree/bindings/clock/exynos5440-clock.txt | 45 +++-------------------
 arch/arm/boot/dts/exynos5440.dtsi                  | 27 ++++++-------
 2 files changed, 20 insertions(+), 52 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 4499e99..56a0269b 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -12,45 +12,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  xtal			1
-  arm_clk		2
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  spi_baud		16
-  pb0_250		17
-  pr0_250		18
-  pr1_250		19
-  b_250			20
-  b_125			21
-  b_200			22
-  sata			23
-  usb			24
-  gmac0			25
-  cs250			26
-  pb0_250_o		27
-  pr0_250_o		28
-  pr1_250_o		29
-  b_250_o		30
-  b_125_o		31
-  b_200_o		32
-  sata_o		33
-  usb_o			34
-  gmac0_o		35
-  cs250_o		36
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
 
 Example: An example of a clock controller node is listed below.
 
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index ff7f5d8..bf22d98 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/clock/exynos5440.h>
 #include "skeleton.dtsi"
 
 / {
@@ -102,7 +103,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -110,7 +111,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
-		clocks = <&clock 21>, <&clock 21>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
@@ -122,7 +123,7 @@
 		#size-cells = <0>;
 		samsung,spi-src-clk = <0>;
 		num-cs = <1>;
-		clocks = <&clock 21>, <&clock 16>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
 		clock-names = "spi", "spi_busclk0";
 	};
 
@@ -158,7 +159,7 @@
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
@@ -168,7 +169,7 @@
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "i2c";
 	};
 
@@ -176,7 +177,7 @@
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "watchdog";
 	};
 
@@ -187,7 +188,7 @@
 		interrupts = <0 31 4>;
 		interrupt-names = "macirq";
 		phy-mode = "sgmii";
-		clocks = <&clock 25>;
+		clocks = <&clock CLK_GMAC0>;
 		clock-names = "stmmaceth";
 	};
 
@@ -203,7 +204,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock 21>;
+		clocks = <&clock CLK_B_125>;
 		clock-names = "rtc";
 	};
 
@@ -211,7 +212,7 @@
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
 		interrupts = <0 30 0>;
-		clocks = <&clock 23>;
+		clocks = <&clock CLK_SATA>;
 		clock-names = "sata";
 	};
 
@@ -219,7 +220,7 @@
 		compatible = "samsung,exynos5440-ohci";
 		reg = <0x220000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -227,7 +228,7 @@
 		compatible = "samsung,exynos5440-ehci";
 		reg = <0x221000 0x1000>;
 		interrupts = <0 29 0>;
-		clocks = <&clock 24>;
+		clocks = <&clock CLK_USB>;
 		clock-names = "usbhost";
 	};
 
@@ -237,7 +238,7 @@
 			0x270000 0x1000
 			0x271000 0x40>;
 		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock 28>, <&clock 27>;
+		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -256,7 +257,7 @@
 			0x272000 0x1000
 			0x271040 0x40>;
 		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock 29>, <&clock 27>;
+		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
 		clock-names = "pcie", "pcie_bus";
 		#address-cells = <3>;
 		#size-cells = <2>;
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux