RE: [PATCH 4/4] Documentation: Add device tree bindings for Freescale FTM PWM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> Subject: Re: [PATCH 4/4] Documentation: Add device tree bindings for
> Freescale FTM PWM
> 
> On 08/30/2013 01:19 PM, Kumar Gala wrote:
> > Should have at least something w/regards to a commit message.
> >
> > On Aug 20, 2013, at 10:07 PM, Xiubo Li wrote:
> >
> >> Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
> >> ---
> >> .../devicetree/bindings/pwm/fsl-ftm-pwm.txt        | 52
> ++++++++++++++++++++++
> >> 1 file changed, 52 insertions(+)
> >> create mode 100644
> >> Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> >> b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> >> new file mode 100644
> >> index 0000000..698965b
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/pwm/fsl-ftm-pwm.txt
> >> @@ -0,0 +1,52 @@
> >> +Freescale FTM PWM controller
> >> +
> >> +Required properties:
> >> +- compatible: should be "fsl,vf610-ftm-pwm"
> >> +- reg: physical base address and length of the controller's
> >> +registers
> >> +- #pwm-cells: Should be 3. Number of cells being used to specify PWM
> property.
> >> +  First cell specifies the per-chip channel index of the PWM to use,
> >> +the
> >> +  second cell is the period in nanoseconds and bit 0 in the third
> >> +cell is
> >> +  used to encode the polarity of PWM output. Set bit 0 of the third
> >> +in PWM
> >> +  specifier to 1 for inverse polarity & set to 0 for normal polarity.
> >> +- fsl,pwm-clk-ps: the ftm0 pwm clock's prescaler, divide-by 2^n(n = 0
> ~ 7).
> >> +- fsl,pwm-cpwm: Center-Aligned PWM (CPWM) mode.
> >
> > Should describe this in more detail, what does the value actually mean
> for what modes there are?
> 
> Assuming "CPWM" is clearly explained in the HW documentation for this
> chip (I have no idea if that's actually the case), then is it still
> necessary to explain what this means in *detail*? Perhaps simply "see
> section XXX in the TRM" or "see register XXX, bit YYY in the HW
> documentation" would be enough?
>
If to clearly explain the 'CPWM' mode, there maybe need much more words, I think just simply explain it, and then for more detail information "see section XXX in the TRM" or "see register XXX, bit YYY in HW documentation".


Thanks.

--
Best Regards,
Xiubo


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux