imx27 pincontrol driver using the imx1 core driver. The DT bindings are similar to other imx pincontrol drivers. Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx> --- .../bindings/pinctrl/fsl,imx27-pinctrl.txt | 50 +++ drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx27.c | 477 +++++++++++++++++++++ 4 files changed, 536 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-imx27.c diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt new file mode 100644 index 0000000..6619968 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt @@ -0,0 +1,50 @@ +* Freescale IMX27 IOMUX Controller + +Required properties: +- compatible: "fsl,imx27-iomuxc" + +The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes. + +Required properties for pin configuration node: +- fsl,pins: three integers array, represents a group of pins mux and config + setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are + defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or + 1, meaning Pullup disable/enable. + PIN is a integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable + configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin + number on the specific port (between 0 and 31). + MUX_ID is + function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) + function: 0 - Primary function + 1 - Alternate function + 2 - GPIO + direction: 0 - Input + 1 - Output + gpio_oconf: 0 - A_IN + 1 - B_IN + 2 - C_IN + 3 - Data Register + gpio_iconfa/b: 0 - GPIO_IN + 1 - Interrupt Status Register + 2 - 0 + 3 - 1 + +Example: + +iomuxc: iomuxc@10015000 { + compatible = "fsl,imx27-iomuxc"; + reg = <0x10015000 0x600>; + + uart { + pinctrl_uart1: uart-1 { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + ... + }; +}; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 266a206..53fab24 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -85,6 +85,14 @@ config PINCTRL_IMX1_CORE select PINMUX select PINCONF +config PINCTRL_IMX27 + bool "IMX27 pinctrl driver" + depends on OF + depends on SOC_IMX27 + select PINCTRL_IMX1_CORE + help + Say Y here to enable the imx27 pinctrl driver + config PINCTRL_IMX35 bool "IMX35 pinctrl driver" depends on OF diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 43bb05e..d08bf87 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o obj-$(CONFIG_PINCTRL_IMX1_CORE) += pinctrl-imx1-core.o +obj-$(CONFIG_PINCTRL_IMX27) += pinctrl-imx27.o obj-$(CONFIG_PINCTRL_IMX35) += pinctrl-imx35.o obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o diff --git a/drivers/pinctrl/pinctrl-imx27.c b/drivers/pinctrl/pinctrl-imx27.c new file mode 100644 index 0000000..417c992 --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx27.c @@ -0,0 +1,477 @@ +/* + * imx27 pinctrl driver based on imx pinmux core + * + * Copyright (C) 2013 Pengutronix + * + * Author: Markus Pargmann <mpa@xxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx1.h" + +#define PAD_ID(port, pin) (port*32 + pin) +#define PA 0 +#define PB 1 +#define PC 2 +#define PD 3 +#define PE 4 +#define PF 5 + +enum imx27_pads { + MX27_PAD_USBH2_CLK = PAD_ID(PA, 0), + MX27_PAD_USBH2_DIR = PAD_ID(PA, 1), + MX27_PAD_USBH2_DATA7 = PAD_ID(PA, 2), + MX27_PAD_USBH2_NXT = PAD_ID(PA, 3), + MX27_PAD_USBH2_STP = PAD_ID(PA, 4), + MX27_PAD_LSCLK = PAD_ID(PA, 5), + MX27_PAD_LD0 = PAD_ID(PA, 6), + MX27_PAD_LD1 = PAD_ID(PA, 7), + MX27_PAD_LD2 = PAD_ID(PA, 8), + MX27_PAD_LD3 = PAD_ID(PA, 9), + MX27_PAD_LD4 = PAD_ID(PA, 10), + MX27_PAD_LD5 = PAD_ID(PA, 11), + MX27_PAD_LD6 = PAD_ID(PA, 12), + MX27_PAD_LD7 = PAD_ID(PA, 13), + MX27_PAD_LD8 = PAD_ID(PA, 14), + MX27_PAD_LD9 = PAD_ID(PA, 15), + MX27_PAD_LD10 = PAD_ID(PA, 16), + MX27_PAD_LD11 = PAD_ID(PA, 17), + MX27_PAD_LD12 = PAD_ID(PA, 18), + MX27_PAD_LD13 = PAD_ID(PA, 19), + MX27_PAD_LD14 = PAD_ID(PA, 20), + MX27_PAD_LD15 = PAD_ID(PA, 21), + MX27_PAD_LD16 = PAD_ID(PA, 22), + MX27_PAD_LD17 = PAD_ID(PA, 23), + MX27_PAD_REV = PAD_ID(PA, 24), + MX27_PAD_CLS = PAD_ID(PA, 25), + MX27_PAD_PS = PAD_ID(PA, 26), + MX27_PAD_SPL_SPR = PAD_ID(PA, 27), + MX27_PAD_HSYNC = PAD_ID(PA, 28), + MX27_PAD_VSYNC = PAD_ID(PA, 29), + MX27_PAD_CONTRAST = PAD_ID(PA, 30), + MX27_PAD_OE_ACD = PAD_ID(PA, 31), + + MX27_PAD_UNUSED0 = PAD_ID(PB, 0), + MX27_PAD_UNUSED1 = PAD_ID(PB, 1), + MX27_PAD_UNUSED2 = PAD_ID(PB, 2), + MX27_PAD_UNUSED3 = PAD_ID(PB, 3), + MX27_PAD_SD2_D0 = PAD_ID(PB, 4), + MX27_PAD_SD2_D1 = PAD_ID(PB, 5), + MX27_PAD_SD2_D2 = PAD_ID(PB, 6), + MX27_PAD_SD2_D3 = PAD_ID(PB, 7), + MX27_PAD_SD2_CMD = PAD_ID(PB, 8), + MX27_PAD_SD2_CLK = PAD_ID(PB, 9), + MX27_PAD_CSI_D0 = PAD_ID(PB, 10), + MX27_PAD_CSI_D1 = PAD_ID(PB, 11), + MX27_PAD_CSI_D2 = PAD_ID(PB, 12), + MX27_PAD_CSI_D3 = PAD_ID(PB, 13), + MX27_PAD_CSI_D4 = PAD_ID(PB, 14), + MX27_PAD_CSI_MCLK = PAD_ID(PB, 15), + MX27_PAD_CSI_PIXCLK = PAD_ID(PB, 16), + MX27_PAD_CSI_D5 = PAD_ID(PB, 17), + MX27_PAD_CSI_D6 = PAD_ID(PB, 18), + MX27_PAD_CSI_D7 = PAD_ID(PB, 19), + MX27_PAD_CSI_VSYNC = PAD_ID(PB, 20), + MX27_PAD_CSI_HSYNC = PAD_ID(PB, 21), + MX27_PAD_USBH1_SUSP = PAD_ID(PB, 22), + MX27_PAD_USB_PWR = PAD_ID(PB, 23), + MX27_PAD_USB_OC_B = PAD_ID(PB, 24), + MX27_PAD_USBH1_RCV = PAD_ID(PB, 25), + MX27_PAD_USBH1_FS = PAD_ID(PB, 26), + MX27_PAD_USBH1_OE_B = PAD_ID(PB, 27), + MX27_PAD_USBH1_TXDM = PAD_ID(PB, 28), + MX27_PAD_USBH1_TXDP = PAD_ID(PB, 29), + MX27_PAD_USBH1_RXDM = PAD_ID(PB, 30), + MX27_PAD_USBH1_RXDP = PAD_ID(PB, 31), + + MX27_PAD_UNUSED4 = PAD_ID(PC, 0), + MX27_PAD_UNUSED5 = PAD_ID(PC, 1), + MX27_PAD_UNUSED6 = PAD_ID(PC, 2), + MX27_PAD_UNUSED7 = PAD_ID(PC, 3), + MX27_PAD_UNUSED8 = PAD_ID(PC, 4), + MX27_PAD_I2C2_SDA = PAD_ID(PC, 5), + MX27_PAD_I2C2_SCL = PAD_ID(PC, 6), + MX27_PAD_USBOTG_DATA5 = PAD_ID(PC, 7), + MX27_PAD_USBOTG_DATA6 = PAD_ID(PC, 8), + MX27_PAD_USBOTG_DATA0 = PAD_ID(PC, 9), + MX27_PAD_USBOTG_DATA2 = PAD_ID(PC, 10), + MX27_PAD_USBOTG_DATA1 = PAD_ID(PC, 11), + MX27_PAD_USBOTG_DATA4 = PAD_ID(PC, 12), + MX27_PAD_USBOTG_DATA3 = PAD_ID(PC, 13), + MX27_PAD_TOUT = PAD_ID(PC, 14), + MX27_PAD_TIN = PAD_ID(PC, 15), + MX27_PAD_SSI4_FS = PAD_ID(PC, 16), + MX27_PAD_SSI4_RXDAT = PAD_ID(PC, 17), + MX27_PAD_SSI4_TXDAT = PAD_ID(PC, 18), + MX27_PAD_SSI4_CLK = PAD_ID(PC, 19), + MX27_PAD_SSI1_FS = PAD_ID(PC, 20), + MX27_PAD_SSI1_RXDAT = PAD_ID(PC, 21), + MX27_PAD_SSI1_TXDAT = PAD_ID(PC, 22), + MX27_PAD_SSI1_CLK = PAD_ID(PC, 23), + MX27_PAD_SSI2_FS = PAD_ID(PC, 24), + MX27_PAD_SSI2_RXDAT = PAD_ID(PC, 25), + MX27_PAD_SSI2_TXDAT = PAD_ID(PC, 26), + MX27_PAD_SSI2_CLK = PAD_ID(PC, 27), + MX27_PAD_SSI3_FS = PAD_ID(PC, 28), + MX27_PAD_SSI3_RXDAT = PAD_ID(PC, 29), + MX27_PAD_SSI3_TXDAT = PAD_ID(PC, 30), + MX27_PAD_SSI3_CLK = PAD_ID(PC, 31), + + MX27_PAD_SD3_CMD = PAD_ID(PD, 0), + MX27_PAD_SD3_CLK = PAD_ID(PD, 1), + MX27_PAD_ATA_DATA0 = PAD_ID(PD, 2), + MX27_PAD_ATA_DATA1 = PAD_ID(PD, 3), + MX27_PAD_ATA_DATA2 = PAD_ID(PD, 4), + MX27_PAD_ATA_DATA3 = PAD_ID(PD, 5), + MX27_PAD_ATA_DATA4 = PAD_ID(PD, 6), + MX27_PAD_ATA_DATA5 = PAD_ID(PD, 7), + MX27_PAD_ATA_DATA6 = PAD_ID(PD, 8), + MX27_PAD_ATA_DATA7 = PAD_ID(PD, 9), + MX27_PAD_ATA_DATA8 = PAD_ID(PD, 10), + MX27_PAD_ATA_DATA9 = PAD_ID(PD, 11), + MX27_PAD_ATA_DATA10 = PAD_ID(PD, 12), + MX27_PAD_ATA_DATA11 = PAD_ID(PD, 13), + MX27_PAD_ATA_DATA12 = PAD_ID(PD, 14), + MX27_PAD_ATA_DATA13 = PAD_ID(PD, 15), + MX27_PAD_ATA_DATA14 = PAD_ID(PD, 16), + MX27_PAD_I2C_DATA = PAD_ID(PD, 17), + MX27_PAD_I2C_CLK = PAD_ID(PD, 18), + MX27_PAD_CSPI2_SS2 = PAD_ID(PD, 19), + MX27_PAD_CSPI2_SS1 = PAD_ID(PD, 20), + MX27_PAD_CSPI2_SS0 = PAD_ID(PD, 21), + MX27_PAD_CSPI2_SCLK = PAD_ID(PD, 22), + MX27_PAD_CSPI2_MISO = PAD_ID(PD, 23), + MX27_PAD_CSPI2_MOSI = PAD_ID(PD, 24), + MX27_PAD_CSPI1_RDY = PAD_ID(PD, 25), + MX27_PAD_CSPI1_SS2 = PAD_ID(PD, 26), + MX27_PAD_CSPI1_SS1 = PAD_ID(PD, 27), + MX27_PAD_CSPI1_SS0 = PAD_ID(PD, 28), + MX27_PAD_CSPI1_SCLK = PAD_ID(PD, 29), + MX27_PAD_CSPI1_MISO = PAD_ID(PD, 30), + MX27_PAD_CSPI1_MOSI = PAD_ID(PD, 31), + + MX27_PAD_USBOTG_NXT = PAD_ID(PE, 0), + MX27_PAD_USBOTG_STP = PAD_ID(PE, 1), + MX27_PAD_USBOTG_DIR = PAD_ID(PE, 2), + MX27_PAD_UART2_CTS = PAD_ID(PE, 3), + MX27_PAD_UART2_RTS = PAD_ID(PE, 4), + MX27_PAD_PWMO = PAD_ID(PE, 5), + MX27_PAD_UART2_TXD = PAD_ID(PE, 6), + MX27_PAD_UART2_RXD = PAD_ID(PE, 7), + MX27_PAD_UART3_TXD = PAD_ID(PE, 8), + MX27_PAD_UART3_RXD = PAD_ID(PE, 9), + MX27_PAD_UART3_CTS = PAD_ID(PE, 10), + MX27_PAD_UART3_RTS = PAD_ID(PE, 11), + MX27_PAD_UART1_TXD = PAD_ID(PE, 12), + MX27_PAD_UART1_RXD = PAD_ID(PE, 13), + MX27_PAD_UART1_CTS = PAD_ID(PE, 14), + MX27_PAD_UART1_RTS = PAD_ID(PE, 15), + MX27_PAD_RTCK = PAD_ID(PE, 16), + MX27_PAD_RESET_OUT_B = PAD_ID(PE, 17), + MX27_PAD_SD1_D0 = PAD_ID(PE, 18), + MX27_PAD_SD1_D1 = PAD_ID(PE, 19), + MX27_PAD_SD1_D2 = PAD_ID(PE, 20), + MX27_PAD_SD1_D3 = PAD_ID(PE, 21), + MX27_PAD_SD1_CMD = PAD_ID(PE, 22), + MX27_PAD_SD1_CLK = PAD_ID(PE, 23), + MX27_PAD_USBOTG_CLK = PAD_ID(PE, 24), + MX27_PAD_USBOTG_DATA7 = PAD_ID(PE, 25), + MX27_PAD_UNUSED9 = PAD_ID(PE, 26), + MX27_PAD_UNUSED10 = PAD_ID(PE, 27), + MX27_PAD_UNUSED11 = PAD_ID(PE, 28), + MX27_PAD_UNUSED12 = PAD_ID(PE, 29), + MX27_PAD_UNUSED13 = PAD_ID(PE, 30), + MX27_PAD_UNUSED14 = PAD_ID(PE, 31), + + MX27_PAD_NFRB = PAD_ID(PF, 0), + MX27_PAD_NFCLE = PAD_ID(PF, 1), + MX27_PAD_NFWP_B = PAD_ID(PF, 2), + MX27_PAD_NFCE_B = PAD_ID(PF, 3), + MX27_PAD_NFALE = PAD_ID(PF, 4), + MX27_PAD_NFRE_B = PAD_ID(PF, 5), + MX27_PAD_NFWE_B = PAD_ID(PF, 6), + MX27_PAD_PC_POE = PAD_ID(PF, 7), + MX27_PAD_PC_RW_B = PAD_ID(PF, 8), + MX27_PAD_IOIS16 = PAD_ID(PF, 9), + MX27_PAD_PC_RST = PAD_ID(PF, 10), + MX27_PAD_PC_BVD2 = PAD_ID(PF, 11), + MX27_PAD_PC_BVD1 = PAD_ID(PF, 12), + MX27_PAD_PC_VS2 = PAD_ID(PF, 13), + MX27_PAD_PC_VS1 = PAD_ID(PF, 14), + MX27_PAD_CLKO = PAD_ID(PF, 15), + MX27_PAD_PC_PWRON = PAD_ID(PF, 16), + MX27_PAD_PC_READY = PAD_ID(PF, 17), + MX27_PAD_PC_WAIT_B = PAD_ID(PF, 18), + MX27_PAD_PC_CD2_B = PAD_ID(PF, 19), + MX27_PAD_PC_CD1_B = PAD_ID(PF, 20), + MX27_PAD_CS4_B = PAD_ID(PF, 21), + MX27_PAD_CS5_B = PAD_ID(PF, 22), + MX27_PAD_ATA_DATA15 = PAD_ID(PF, 23), + MX27_PAD_UNUSED15 = PAD_ID(PF, 24), + MX27_PAD_UNUSED16 = PAD_ID(PF, 25), + MX27_PAD_UNUSED17 = PAD_ID(PF, 26), + MX27_PAD_UNUSED18 = PAD_ID(PF, 27), + MX27_PAD_UNUSED19 = PAD_ID(PF, 28), + MX27_PAD_UNUSED20 = PAD_ID(PF, 29), + MX27_PAD_UNUSED21 = PAD_ID(PF, 30), + MX27_PAD_UNUSED22 = PAD_ID(PF, 31), +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx27_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX27_PAD_USBH2_CLK), + IMX_PINCTRL_PIN(MX27_PAD_USBH2_DIR), + IMX_PINCTRL_PIN(MX27_PAD_USBH2_DATA7), + IMX_PINCTRL_PIN(MX27_PAD_USBH2_NXT), + IMX_PINCTRL_PIN(MX27_PAD_USBH2_STP), + IMX_PINCTRL_PIN(MX27_PAD_LSCLK), + IMX_PINCTRL_PIN(MX27_PAD_LD0), + IMX_PINCTRL_PIN(MX27_PAD_LD1), + IMX_PINCTRL_PIN(MX27_PAD_LD2), + IMX_PINCTRL_PIN(MX27_PAD_LD3), + IMX_PINCTRL_PIN(MX27_PAD_LD4), + IMX_PINCTRL_PIN(MX27_PAD_LD5), + IMX_PINCTRL_PIN(MX27_PAD_LD6), + IMX_PINCTRL_PIN(MX27_PAD_LD7), + IMX_PINCTRL_PIN(MX27_PAD_LD8), + IMX_PINCTRL_PIN(MX27_PAD_LD9), + IMX_PINCTRL_PIN(MX27_PAD_LD10), + IMX_PINCTRL_PIN(MX27_PAD_LD11), + IMX_PINCTRL_PIN(MX27_PAD_LD12), + IMX_PINCTRL_PIN(MX27_PAD_LD13), + IMX_PINCTRL_PIN(MX27_PAD_LD14), + IMX_PINCTRL_PIN(MX27_PAD_LD15), + IMX_PINCTRL_PIN(MX27_PAD_LD16), + IMX_PINCTRL_PIN(MX27_PAD_LD17), + IMX_PINCTRL_PIN(MX27_PAD_REV), + IMX_PINCTRL_PIN(MX27_PAD_CLS), + IMX_PINCTRL_PIN(MX27_PAD_PS), + IMX_PINCTRL_PIN(MX27_PAD_SPL_SPR), + IMX_PINCTRL_PIN(MX27_PAD_HSYNC), + IMX_PINCTRL_PIN(MX27_PAD_VSYNC), + IMX_PINCTRL_PIN(MX27_PAD_CONTRAST), + IMX_PINCTRL_PIN(MX27_PAD_OE_ACD), + + IMX_PINCTRL_PIN(MX27_PAD_UNUSED0), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED1), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED2), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED3), + IMX_PINCTRL_PIN(MX27_PAD_SD2_D0), + IMX_PINCTRL_PIN(MX27_PAD_SD2_D1), + IMX_PINCTRL_PIN(MX27_PAD_SD2_D2), + IMX_PINCTRL_PIN(MX27_PAD_SD2_D3), + IMX_PINCTRL_PIN(MX27_PAD_SD2_CMD), + IMX_PINCTRL_PIN(MX27_PAD_SD2_CLK), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D0), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D1), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D2), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D3), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D4), + IMX_PINCTRL_PIN(MX27_PAD_CSI_MCLK), + IMX_PINCTRL_PIN(MX27_PAD_CSI_PIXCLK), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D5), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D6), + IMX_PINCTRL_PIN(MX27_PAD_CSI_D7), + IMX_PINCTRL_PIN(MX27_PAD_CSI_VSYNC), + IMX_PINCTRL_PIN(MX27_PAD_CSI_HSYNC), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_SUSP), + IMX_PINCTRL_PIN(MX27_PAD_USB_PWR), + IMX_PINCTRL_PIN(MX27_PAD_USB_OC_B), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_RCV), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_FS), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_OE_B), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDM), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDP), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDM), + IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDP), + + IMX_PINCTRL_PIN(MX27_PAD_UNUSED4), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED5), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED6), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED7), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED8), + IMX_PINCTRL_PIN(MX27_PAD_I2C2_SDA), + IMX_PINCTRL_PIN(MX27_PAD_I2C2_SCL), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA5), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA6), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA0), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA2), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA1), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA4), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA3), + IMX_PINCTRL_PIN(MX27_PAD_TOUT), + IMX_PINCTRL_PIN(MX27_PAD_TIN), + IMX_PINCTRL_PIN(MX27_PAD_SSI4_FS), + IMX_PINCTRL_PIN(MX27_PAD_SSI4_RXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI4_TXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI4_CLK), + IMX_PINCTRL_PIN(MX27_PAD_SSI1_FS), + IMX_PINCTRL_PIN(MX27_PAD_SSI1_RXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI1_TXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI1_CLK), + IMX_PINCTRL_PIN(MX27_PAD_SSI2_FS), + IMX_PINCTRL_PIN(MX27_PAD_SSI2_RXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI2_TXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI2_CLK), + IMX_PINCTRL_PIN(MX27_PAD_SSI3_FS), + IMX_PINCTRL_PIN(MX27_PAD_SSI3_RXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI3_TXDAT), + IMX_PINCTRL_PIN(MX27_PAD_SSI3_CLK), + + IMX_PINCTRL_PIN(MX27_PAD_SD3_CMD), + IMX_PINCTRL_PIN(MX27_PAD_SD3_CLK), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA0), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA1), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA2), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA3), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA4), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA5), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA6), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA7), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA8), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA9), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA10), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA11), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA12), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA13), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA14), + IMX_PINCTRL_PIN(MX27_PAD_I2C_DATA), + IMX_PINCTRL_PIN(MX27_PAD_I2C_CLK), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS2), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS1), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS0), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SCLK), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MISO), + IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MOSI), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_RDY), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS2), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS1), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS0), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SCLK), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MISO), + IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MOSI), + + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_NXT), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_STP), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DIR), + IMX_PINCTRL_PIN(MX27_PAD_UART2_CTS), + IMX_PINCTRL_PIN(MX27_PAD_UART2_RTS), + IMX_PINCTRL_PIN(MX27_PAD_PWMO), + IMX_PINCTRL_PIN(MX27_PAD_UART2_TXD), + IMX_PINCTRL_PIN(MX27_PAD_UART2_RXD), + IMX_PINCTRL_PIN(MX27_PAD_UART3_TXD), + IMX_PINCTRL_PIN(MX27_PAD_UART3_RXD), + IMX_PINCTRL_PIN(MX27_PAD_UART3_CTS), + IMX_PINCTRL_PIN(MX27_PAD_UART3_RTS), + IMX_PINCTRL_PIN(MX27_PAD_UART1_TXD), + IMX_PINCTRL_PIN(MX27_PAD_UART1_RXD), + IMX_PINCTRL_PIN(MX27_PAD_UART1_CTS), + IMX_PINCTRL_PIN(MX27_PAD_UART1_RTS), + IMX_PINCTRL_PIN(MX27_PAD_RTCK), + IMX_PINCTRL_PIN(MX27_PAD_RESET_OUT_B), + IMX_PINCTRL_PIN(MX27_PAD_SD1_D0), + IMX_PINCTRL_PIN(MX27_PAD_SD1_D1), + IMX_PINCTRL_PIN(MX27_PAD_SD1_D2), + IMX_PINCTRL_PIN(MX27_PAD_SD1_D3), + IMX_PINCTRL_PIN(MX27_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX27_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_CLK), + IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA7), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED9), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED10), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED11), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED12), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED13), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED14), + + IMX_PINCTRL_PIN(MX27_PAD_NFRB), + IMX_PINCTRL_PIN(MX27_PAD_NFCLE), + IMX_PINCTRL_PIN(MX27_PAD_NFWP_B), + IMX_PINCTRL_PIN(MX27_PAD_NFCE_B), + IMX_PINCTRL_PIN(MX27_PAD_NFALE), + IMX_PINCTRL_PIN(MX27_PAD_NFRE_B), + IMX_PINCTRL_PIN(MX27_PAD_NFWE_B), + IMX_PINCTRL_PIN(MX27_PAD_PC_POE), + IMX_PINCTRL_PIN(MX27_PAD_PC_RW_B), + IMX_PINCTRL_PIN(MX27_PAD_IOIS16), + IMX_PINCTRL_PIN(MX27_PAD_PC_RST), + IMX_PINCTRL_PIN(MX27_PAD_PC_BVD2), + IMX_PINCTRL_PIN(MX27_PAD_PC_BVD1), + IMX_PINCTRL_PIN(MX27_PAD_PC_VS2), + IMX_PINCTRL_PIN(MX27_PAD_PC_VS1), + IMX_PINCTRL_PIN(MX27_PAD_CLKO), + IMX_PINCTRL_PIN(MX27_PAD_PC_PWRON), + IMX_PINCTRL_PIN(MX27_PAD_PC_READY), + IMX_PINCTRL_PIN(MX27_PAD_PC_WAIT_B), + IMX_PINCTRL_PIN(MX27_PAD_PC_CD2_B), + IMX_PINCTRL_PIN(MX27_PAD_PC_CD1_B), + IMX_PINCTRL_PIN(MX27_PAD_CS4_B), + IMX_PINCTRL_PIN(MX27_PAD_CS5_B), + IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA15), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED15), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED16), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED17), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED18), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED19), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED20), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED21), + IMX_PINCTRL_PIN(MX27_PAD_UNUSED22), +}; + +static struct imx1_pinctrl_soc_info imx27_pinctrl_info = { + .pins = imx27_pinctrl_pads, + .npins = ARRAY_SIZE(imx27_pinctrl_pads), +}; + +static struct of_device_id imx27_pinctrl_of_match[] = { + { .compatible = "fsl,imx27-iomuxc", }, + { /* sentinel */ } +}; + +struct imx27_pinctrl_private { + int num_gpio_childs; + struct platform_device **gpio_dev; + struct mxc_gpio_platform_data *gpio_pdata; +}; + +static int imx27_pinctrl_probe(struct platform_device *pdev) +{ + return imx1_pinctrl_core_probe(pdev, &imx27_pinctrl_info); +} + +static struct platform_driver imx27_pinctrl_driver = { + .driver = { + .name = "imx27-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx27_pinctrl_of_match), + }, + .probe = imx27_pinctrl_probe, + .remove = imx1_pinctrl_core_remove, +}; + +static int __init imx27_pinctrl_init(void) +{ + return platform_driver_register(&imx27_pinctrl_driver); +} +arch_initcall(imx27_pinctrl_init); + +static void __exit imx27_pinctrl_exit(void) +{ + platform_driver_unregister(&imx27_pinctrl_driver); +} +module_exit(imx27_pinctrl_exit); +MODULE_AUTHOR("Markus Pargmann <mpa@xxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Freescale IMX27 pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html