Hello.
On 29-08-2013 13:38, Jean-Francois Moine wrote:
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 499abad..78227e2 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -573,6 +573,24 @@
phy-handle = <ðphy>;
};
};
+
+ i2s0: audio-controller@b0000 {
According to ePAPR [1] the node should be called "sound", not
"audio-controller".
+ compatible = "marvell,mvebu-audio";
+ reg = <0xb0000 0x2210>;
+ interrupts = <19>, <20>;
+ clocks = <&gate_clk 12>;
+ clock-names = "internal";
+ status = "disabled";
+ };
AFAIK, "sound" describes the global audio subsystem. For the Cubox,
this will be done by something like:
sound {
compatible = "simple-audio";
audio-controller = <&i2s1>;
audio-codec = <&spdif>;
codec-dai-name = "dit-hifi";
};
Well, then "sound-controller" sounds somewhat more appropriate.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
