On Thursday 29 of August 2013 11:10:21 Rahul Sharma wrote: > Adding information about clocks to the binding documentation > for exynos mixer and hdmi. > > Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/video/exynos_hdmi.txt | 15 > ++++++++++++++- .../devicetree/bindings/video/exynos_mixer.txt > | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index > 323983b..1878418 100644 > --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > @@ -12,7 +12,20 @@ Required properties: > a) phandle of the gpio controller node. > b) pin number within the gpio controller. > c) optional flags and pull up/down. > - > +- clocks: list of clock IDs from SoC clock driver. > + a) hdmi: It is required for gate operation on aclk_200_disp1 clock > + which clocks the display1 block. The "aclk_200_disp1" name is valid only on Exynos 5, but this binding is generic for all Exynos SoCs and probably also previous S5P SoCs. I believe that "Gate of HDMI IP bus clock." would be appropriate here. Otherwise, this patch looks good to me. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html