Re: [PATCH V5] gpio: New driver for LSI ZEVIO SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/26/2013 12:18 PM, Fabian Vogt wrote:
> This driver supports the GPIO controller found in LSI ZEVIO SoCs.
> It has been successfully tested on a TI nspire CX calculator.

What changed in v5 (or indeed any other versions?)

> diff --git a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt

> +Zevio GPIO controller
> +
> +Required properties:
> +- compatible = "lsi,zevio-gpio"
> +- reg = <BASEADDR SIZE>

Perhaps this should say:

reg: Contains a single register specifier for the GPIO module's registers.

> +- #gpio-cells = <2>

This should describe what those cells are. For example perhaps:

#gpio-cells. Must be 2. The first cell is the GPIO number. The second
  cell is used to specify optional parameters:
  - bit 0 specifies polarity (0 for normal, 1 for inverted)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux