As use the multiple compatible string, we can remove hardware register in dt.
CC: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
---
.../devicetree/bindings/arm/atmel-adc.txt | 7 +-
arch/arm/mach-at91/include/mach/at91_adc.h | 9 +++
drivers/iio/adc/at91_adc.c | 79 ++++++++++----------
3 files changed, 52 insertions(+), 43 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index 16769d9..723c205 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -1,18 +1,15 @@
* AT91's Analog to Digital Converter (ADC)
Required properties:
- - compatible: Should be "atmel,at91sam9260-adc"
+ - compatible: Should be "atmel,<chip>-adc"
+ <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
- reg: Should contain ADC registers location and length
- interrupts: Should contain the IRQ line for the ADC
- - atmel,adc-channel-base: Offset of the first channel data register
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
device
- - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
- atmel,adc-num-channels: Number of channels available in the ADC
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- - atmel,adc-status-register: Offset of the Interrupt Status Register
- - atmel,adc-trigger-register: Offset of the Trigger Register
- atmel,adc-vref: Reference voltage in millivolts for the conversions
- atmel,adc-res: List of resolution in bits supported by the ADC. List size
must be two at least.
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 8e7ed5c..bea1a20 100644
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -48,6 +48,9 @@
#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
#define AT91_ADC_LDATA (0x3ff)
@@ -58,4 +61,10 @@
#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
#define AT91_ADC_DATA (0x3ff)
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
#endif
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 9cf8ab5..49dd751 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -39,6 +39,10 @@
#define at91_adc_writel(st, reg, val) \
(writel_relaxed(val, st->reg_base + reg))
+struct at91_adc_caps {
+ struct at91_adc_reg_desc registers;
+};
+
struct at91_adc_state {
struct clk *adc_clk;
u16 *buffer;
@@ -62,6 +66,7 @@ struct at91_adc_state {
u32 res; /* resolution used for convertions */
bool low_res; /* the resolution corresponds to the lowest one */
wait_queue_head_t wq_data_avail;
+ struct at91_adc_caps *caps;
};
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
@@ -429,6 +434,8 @@ ret:
return ret;
}
+static const struct of_device_id at91_adc_dt_ids[];
+
static int at91_adc_probe_dt(struct at91_adc_state *st,
struct platform_device *pdev)
{
@@ -441,6 +448,9 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
if (!node)
return -EINVAL;
+ st->caps = (struct at91_adc_caps *)
+ of_match_device(at91_adc_dt_ids, &pdev->dev)->data;
+
st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
@@ -481,43 +491,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
if (ret)
goto error_ret;
- st->registers = devm_kzalloc(&idev->dev,
- sizeof(struct at91_adc_reg_desc),
- GFP_KERNEL);
- if (!st->registers) {
- dev_err(&idev->dev, "Could not allocate register memory.\n");
- ret = -ENOMEM;
- goto error_ret;
- }
-
- if (of_property_read_u32(node, "atmel,adc-channel-base", &prop)) {
- dev_err(&idev->dev, "Missing adc-channel-base property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->registers->channel_base = prop;
-
- if (of_property_read_u32(node, "atmel,adc-drdy-mask", &prop)) {
- dev_err(&idev->dev, "Missing adc-drdy-mask property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->registers->drdy_mask = prop;
-
- if (of_property_read_u32(node, "atmel,adc-status-register", &prop)) {
- dev_err(&idev->dev, "Missing adc-status-register property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->registers->status_register = prop;
-
- if (of_property_read_u32(node, "atmel,adc-trigger-register", &prop)) {
- dev_err(&idev->dev, "Missing adc-trigger-register property in the DT.\n");
- ret = -EINVAL;
- goto error_ret;
- }
- st->registers->trigger_register = prop;
-
+ st->registers = &st->caps->registers;
st->trigger_number = of_get_child_count(node);
st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
sizeof(struct at91_adc_trigger),
@@ -776,8 +750,37 @@ static int at91_adc_remove(struct platform_device *pdev)
}
#ifdef CONFIG_OF
+static struct at91_adc_caps at91sam9260_caps = {
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9260,
+ },
+};
+
+static struct at91_adc_caps at91sam9g45_caps = {
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9G45,
+ },
+};
+
+static struct at91_adc_caps at91sam9x5_caps = {
+ .registers = {
+ .channel_base = AT91_ADC_CDR0_9X5,
+ .drdy_mask = AT91_ADC_SR_DRDY_9X5,
+ .status_register = AT91_ADC_SR_9X5,
+ .trigger_register = AT91_ADC_TRGR_9X5,
+ },
+};
+
static const struct of_device_id at91_adc_dt_ids[] = {
- { .compatible = "atmel,at91sam9260-adc" },
+ { .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps },
+ { .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps },
+ { .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps },
{},
};
MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
