Re: [PATCHv5 2/3] ARM: socfpga: dts: Add support for SD/MMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/23/2013 05:01 PM, Dinh Nguyen wrote:
> On Fri, 2013-08-23 at 16:29 -0600, Stephen Warren wrote:
>> On 08/23/2013 09:44 AM, dinguyen@xxxxxxxxxx wrote:
>>> From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
>>>
>>> Add bindings for SD/MMC for SOCFPGA.
>>
>>> diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
>>
>>> +* altr,sysmgr: Should be the phandle to the system_mgr node. As this is where
>>> +		this where the register that controls the CIU clock phases
>>> +		reside.
>>> +
>>> +* altr,ciu-clk-offset: The order of the cells should be:
>>> +	- First Cell: Offset of the register in the system_mgr node that controls
>>> +		the smpsel bits.
>>> +	- Second Cell: Shift value of the drvsel bits.
>>> +	- Third Cell: Shift value of the smpsel bits.
>>
>> This almost solves the issues I was thinking of. A few more thoughts though:
>>
>> * What if the sysmgr node has multiple reg entries. Is the offset cell
>> in altr,ciu-clk-offset an offset from the first reg entry, or across all
>> reg entries? It might be better to specify this as a reg index plus
>> offset, or allow the sysmgr node to define the format (#sysmgr-cells
>> perhaps).
>>
>> * What if the drvsel and smpsel bits are in different registers, even
>> different sysmgr blocks? Wouldn't it be better to have 2 separate
>> properties, each one defining the location of one bit-field?
>>
>> * bikeshed: altr,ciu-clk-offset isn't a great name; the value is more
>> than just an offset.
>>
>> Putting those together, I might expect the following properties:
>>
>> sysmgr: sysmgr {
>>     /* binding for sysmgr node must specify what those 3 cells are */
>>     #sysmgr-cells = <3>;
>> }
>>
>> dwmmc {
>>     altr,drvsel-reg-field = <
>>         &sysmgr /* sysmgr phandle */
>>         0 /* reg index */
>>         0 /* reg offset */
>>         0 /* field bit position */
>>         3 /* field bit size */>;
>>     altr,smpsel-reg-field = <
>>         &sysmgr /* sysmgr phandle */
>>         0 /* reg index */
>>         0 /* reg offset */
>>         3 /* field bit position */
>>         3 /* field bit size */>;
>> };
>>
>> That would allow the whole sysmgr concept to be completely generic.
>>
>> But, this is a bit like representing raw register I/O in DT, which has
>> been frowned upon in the past.
>>
>> Finally, what if the values for drvsel, smpsel are different in
>> different sysmgr implementations? Do you need a property that defines
>> that values?
>>
>> Another option might be to define a semantic API between the two, such
>> that you only need a sysmgr=<&sysmgr> property, yet the driver for the
>> sysmgr node exposes a function sysmgr_set_dwmmc_drvsel_smpsel(struct
>> device_node *sysmgr_node, uint drvsel, uint smpsel); Now, the sysmgr
>> driver would have to implement that on any SoC that supported a dwmmc.
> 
> I was trying to avoid adding a driver for the sysmgr, as it really does
> not represent any type of device. It is a merely a register region with
> miscellaneous registers that controls other IPs in the SOC.
> 
> I'm thinking perhaps I can set this register in the arch specific file,
> then the SD/MMC driver would not need to bother with it at all?

The problem with hard-coding this in the MMC driver is that it makes the
MMC driver depend on information outside the MMC HW block. If you do
that, you may as well just write the "syscon" registers directly in the
MMC driver.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux