Hello Sergei,
On 26/08/2013 15:21, Sergei Shtylyov wrote:
Hello.
On 26-08-2013 16:35, Boris BREZILLON wrote:
This patch describe the phy used on atmel sama5d3 mother board:
- phy address
- phy interrupt pin
Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
---
arch/arm/boot/dts/sama5d3xmb.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi
b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 8a9e05d..e9521d5 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -81,6 +81,14 @@
macb1: ethernet@f802c000 {
phy-mode = "rmii";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
Address part of the node name doesn't match the "reg" property.
Indeed, I based my definition on arch/arc/boot/dts/angel4.dts where phy
is registered like this :
phy0: ethernet-phy@0 {
reg = <1>;
};
I think it's buggy there too, because I checked other dts files and they
all put the same address
after @ and in reg register.
I'll fix this fot the next version.
Thanks
Best Regards,
Boris
+ interrupt-parent = <&pioE>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+ reg = <1>;
+ };
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
