On 08/09/2013 02:37 PM, Josh Cartwright wrote:
Patch description?
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> +Required properties:
> +- compatible : should be "qcom,spmi-pmic-arb".
> +- reg-names : should be "core", "intr", "cnfg"
> +- reg : offset and length of the PMIC Arbiter Core register map.
> +- reg : offset and length of the PMIC Arbiter Interrupt controller register map.
> +- reg : offset and length of the PMIC Arbiter Configuration register map.
This seems like it's defining the "reg" property 3 times each with a
different meaning. It'd be better to say something like:
reg : register specifier. Must contain 3 entries, in the following
order: core registers, interrupt register, configuration registers.
> + qcom,spmi@fc4c0000 {
...
> + qcom,pm8841@4 {
Node names typically don't include a vendor prefix. For the first
instance above, I think just "spmi@fc4c0000" or even just "spmi" would
be appropriate here; the latter being best in the case where there's
only 1 SPMI controller and hence no need to include the unit address for
uniqueness.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
