On Tue, Aug 20, 2013 at 6:40 PM, Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> wrote: > The "mentor,musb" binding isn't documented so I was about to document > it. > The node is missing a few properties for configuration like > "multipoint", "dyn_fifo", "num_eps" or "ram_bits". However I am not sure > "missing" is the right word here because some of those informations > might be obtained from the chip itself but it is not done (yet). > Further the ePARP 2.3.1 says the matching goes from left to right taking > the fist match. Right now there is jus a driver for > "stericsson,db8500-musb" and none for "mentor,musb". I'm not 100% that > it is simply possible to have a generic since even for DMA we have > ifdefs in the driver between "generic mentor dma" and "ux500 dma" and I > mean within musb and not the dma code. > > For that reason (that I am not sure a generic musb binding is possible and > how its binding / required properties will look like) and the reason that > we have here a minor binding without a driver to look at I suggest to > remove that binding. > If the majority of people prefer to keep this binding I'm curious how > the documentation of the binding should look like. > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx> Patch applied to my ux500-devicetree branch. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html