Since this driver does not handle GPIO on device tree enabled platforms
any more, it should be bypassed whenever device tree is available, to
not conflict with the new pinctrl-samsung driver.
Signed-off-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
---
drivers/gpio/gpio-samsung.c | 34 +++++++---------------------------
1 file changed, 7 insertions(+), 27 deletions(-)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index a1392f4..cc93b1b 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2949,34 +2949,14 @@ static __init int samsung_gpiolib_init(void)
int i, nr_chips;
int group = 0;
-#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440)
/*
- * This gpio driver includes support for device tree support and there
- * are platforms using it. In order to maintain compatibility with those
- * platforms, and to allow non-dt Exynos4210 platforms to use this
- * gpiolib support, a check is added to find out if there is a active
- * pin-controller driver support available. If it is available, this
- * gpiolib support is ignored and the gpiolib support available in
- * pin-controller driver is used. This is a temporary check and will go
- * away when all of the Exynos4210 platforms have switched to using
- * device tree and the pin-ctrl driver.
- */
- struct device_node *pctrl_np;
- static const struct of_device_id exynos_pinctrl_ids[] = {
- { .compatible = "samsung,s3c2412-pinctrl", },
- { .compatible = "samsung,s3c2416-pinctrl", },
- { .compatible = "samsung,s3c2440-pinctrl", },
- { .compatible = "samsung,s3c2450-pinctrl", },
- { .compatible = "samsung,exynos4210-pinctrl", },
- { .compatible = "samsung,exynos4x12-pinctrl", },
- { .compatible = "samsung,exynos5250-pinctrl", },
- { .compatible = "samsung,exynos5440-pinctrl", },
- { }
- };
- for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
- if (pctrl_np && of_device_is_available(pctrl_np))
- return -ENODEV;
-#endif
+ * Currently there are two drivers that can provide GPIO support for
+ * Samsung SoCs. For device tree enabled platforms, the new
+ * pinctrl-samsung driver is used, providing both GPIO and pin control
+ * interfaces. For legacy (non-DT) platforms this driver is used.
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
