Benoit, Care to take a look at this too? * Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx> [130807 04:14]: > From: Lars Poeschel <poeschel@xxxxxxxxxxx> > > Following commit ff5c9059 and therefore other omap platforms using > the gpio-omap driver correct the #interrupt-cells property on am33xx > too. The omap gpio binding documentaion also states that > the #interrupt-cells property should be 2. > > Signed-off-by: Lars Poeschel <poeschel@xxxxxxxxxxx> > --- > arch/arm/boot/dts/am33xx.dtsi | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 38b446b..033c5dd 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -102,7 +102,7 @@ > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > - #interrupt-cells = <1>; > + #interrupt-cells = <2>; > reg = <0x44e07000 0x1000>; > interrupts = <96>; > }; > @@ -113,7 +113,7 @@ > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > - #interrupt-cells = <1>; > + #interrupt-cells = <2>; > reg = <0x4804c000 0x1000>; > interrupts = <98>; > }; > @@ -124,7 +124,7 @@ > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > - #interrupt-cells = <1>; > + #interrupt-cells = <2>; > reg = <0x481ac000 0x1000>; > interrupts = <32>; > }; > @@ -135,7 +135,7 @@ > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > - #interrupt-cells = <1>; > + #interrupt-cells = <2>; > reg = <0x481ae000 0x1000>; > interrupts = <62>; > }; > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
