This patch adds generic ac97 reset functions using pincontrol and gpio
parsed from devicetree.
Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/sound/soc-ac97link.txt | 28 ++++
include/sound/soc.h | 2 +
sound/soc/soc-core.c | 153 +++++++++++++++++++++
3 files changed, 183 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/soc-ac97link.txt
diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
new file mode 100644
index 0000000..80152a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
@@ -0,0 +1,28 @@
+AC97 link bindings
+
+These bindings can be included within any other device node.
+
+Required properties:
+ - pinctrl-names: Has to contain following states to setup the correct
+ pinmuxing for the used gpios:
+ "ac97-running": AC97-link is active
+ "ac97-reset": AC97-link reset state
+ "ac97-warm-reset": AC97-link warm reset state
+ - ac97-gpios: List of gpio phandles with args in the order ac97-sync,
+ ac97-sdata, ac97-reset
+
+
+Example:
+
+ssi {
+ ...
+
+ pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset";
+ pinctrl-0 = <&ac97link_running>;
+ pinctrl-1 = <&ac97link_running>;
+ pinctrl-2 = <&ac97link_reset>;
+ pinctrl-3 = <&ac97link_warm_reset>;
+ ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
+
+ ...
+};
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 6eabee7..c0ac3bc 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -468,6 +468,8 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
void snd_soc_free_ac97_codec(struct snd_soc_codec *codec);
int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops);
+int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops,
+ struct platform_device *pdev);
/*
*Controls
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 0ec070c..6010932 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -30,9 +30,12 @@
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/ctype.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <sound/ac97_codec.h>
#include <sound/core.h>
#include <sound/jack.h>
@@ -69,6 +72,16 @@ static int pmdown_time = 5000;
module_param(pmdown_time, int, 0);
MODULE_PARM_DESC(pmdown_time, "DAPM stream powerdown time (msecs)");
+struct snd_ac97_reset_cfg {
+ struct pinctrl *pctl;
+ struct pinctrl_state *pstate_reset;
+ struct pinctrl_state *pstate_warm_reset;
+ struct pinctrl_state *pstate_run;
+ int gpio_sdata;
+ int gpio_sync;
+ int gpio_reset;
+};
+
/* returns the minimum number of bytes needed to represent
* a particular given value */
static int min_bytes_needed(unsigned long val)
@@ -2080,6 +2093,117 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
}
EXPORT_SYMBOL_GPL(snd_soc_new_ac97_codec);
+static struct snd_ac97_reset_cfg snd_ac97_rst_cfg;
+
+static void snd_soc_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct pinctrl *pctl = snd_ac97_rst_cfg.pctl;
+
+ pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_warm_reset);
+
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 1);
+
+ udelay(10);
+
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0);
+
+ pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run);
+ msleep(2);
+}
+
+static void snd_soc_ac97_reset(struct snd_ac97 *ac97)
+{
+ struct pinctrl *pctl = snd_ac97_rst_cfg.pctl;
+
+ pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_reset);
+
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_sync, 0);
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_sdata, 0);
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 0);
+
+ udelay(10);
+
+ gpio_direction_output(snd_ac97_rst_cfg.gpio_reset, 1);
+
+ pinctrl_select_state(pctl, snd_ac97_rst_cfg.pstate_run);
+ msleep(2);
+}
+
+static int snd_soc_ac97_parse_pinctl(struct device *dev,
+ struct snd_ac97_reset_cfg *cfg)
+{
+ struct pinctrl *p;
+ struct pinctrl_state *state;
+ int gpio;
+ int ret;
+
+ p = devm_pinctrl_get(dev);
+ if (IS_ERR(p)) {
+ dev_err(dev, "Failed to get pinctrl\n");
+ return PTR_RET(p);
+ }
+ cfg->pctl = p;
+
+ state = pinctrl_lookup_state(p, "ac97-reset");
+ if (IS_ERR(state)) {
+ dev_err(dev, "Can't find pinctrl state ac97-reset\n");
+ return PTR_RET(state);
+ }
+ cfg->pstate_reset = state;
+
+ state = pinctrl_lookup_state(p, "ac97-warm-reset");
+ if (IS_ERR(state)) {
+ dev_err(dev, "Can't find pinctrl state ac97-warm-reset\n");
+ return PTR_RET(state);
+ }
+ cfg->pstate_warm_reset = state;
+
+ state = pinctrl_lookup_state(p, "ac97-running");
+ if (IS_ERR(state)) {
+ dev_err(dev, "Can't find pinctrl state ac97-running\n");
+ return PTR_RET(state);
+ }
+ cfg->pstate_run = state;
+
+ gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 0);
+ if (gpio < 0) {
+ dev_err(dev, "Can't find ac97-sync gpio\n");
+ return gpio;
+ }
+ ret = devm_gpio_request(dev, gpio, "AC97 link sync");
+ if (ret) {
+ dev_err(dev, "Failed requesting ac97-sync gpio\n");
+ return ret;
+ }
+ cfg->gpio_sync = gpio;
+
+ gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 1);
+ if (gpio < 0) {
+ dev_err(dev, "Can't find ac97-sdata gpio %d\n", gpio);
+ return gpio;
+ }
+ ret = devm_gpio_request(dev, gpio, "AC97 link sdata");
+ if (ret) {
+ dev_err(dev, "Failed requesting ac97-sdata gpio\n");
+ return ret;
+ }
+ cfg->gpio_sdata = gpio;
+
+ gpio = of_get_named_gpio(dev->of_node, "ac97-gpios", 2);
+ if (gpio < 0) {
+ dev_err(dev, "Can't find ac97-reset gpio\n");
+ return gpio;
+ }
+ ret = devm_gpio_request(dev, gpio, "AC97 link reset");
+ if (ret) {
+ dev_err(dev, "Failed requesting ac97-reset gpio\n");
+ return ret;
+ }
+ cfg->gpio_reset = gpio;
+
+ return 0;
+}
+
struct snd_ac97_bus_ops *soc_ac97_ops;
EXPORT_SYMBOL_GPL(soc_ac97_ops);
@@ -2098,6 +2222,35 @@ int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops)
EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops);
/**
+ * snd_soc_set_ac97_ops_of_reset - Set ac97 ops with generic ac97 reset functions
+ *
+ * This function sets the reset and warm_reset properties of ops and parses
+ * the device node of pdev to get pinctrl states and gpio numbers to use.
+ */
+int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct snd_ac97_reset_cfg cfg;
+ int ret;
+
+ ret = snd_soc_ac97_parse_pinctl(dev, &cfg);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_set_ac97_ops(ops);
+ if (ret)
+ return ret;
+
+ ops->warm_reset = snd_soc_ac97_warm_reset;
+ ops->reset = snd_soc_ac97_reset;
+
+ snd_ac97_rst_cfg = cfg;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_set_ac97_ops_of_reset);
+
+/**
* snd_soc_free_ac97_codec - free AC97 codec device
* @codec: audio codec
*
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
