imx27 pincontrol driver using the imx1 core driver. The DT bindings are
similar to other imx pincontrol drivers.
Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
---
.../bindings/pinctrl/fsl,imx27-pinctrl.txt | 53 +++
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-imx27.c | 477 +++++++++++++++++++++
4 files changed, 539 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-imx27.c
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
new file mode 100644
index 0000000..016fc89
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
@@ -0,0 +1,53 @@
+* Freescale IMX27 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx27-iomuxc"
+
+The iomuxc driver node can have pin configuration subnodes.
+
+Required properties for pin configuration node:
+- fsl,pins: three integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are
+ defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or
+ 1, meaning Pullup disable/enable.
+ PIN is a integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ number on the specific port (between 0 and 31).
+ MUX_ID is
+ function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ function: 0 - Primary function
+ 1 - Alternate function
+ 2 - GPIO
+ direction: 0 - Input
+ 1 - Output
+ gpio_oconf: 0 - A_IN
+ 1 - B_IN
+ 2 - C_IN
+ 3 - Data Register
+ gpio_iconfa/b: 0 - GPIO_IN
+ 1 - Interrupt Status Register
+ 2 - 0
+ 3 - 1
+
+Example:
+
+iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+
+ uart {
+ pinctrl_uart1: uart-1 {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ ...
+ };
+};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 266a206..53fab24 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -85,6 +85,14 @@ config PINCTRL_IMX1_CORE
select PINMUX
select PINCONF
+config PINCTRL_IMX27
+ bool "IMX27 pinctrl driver"
+ depends on OF
+ depends on SOC_IMX27
+ select PINCTRL_IMX1_CORE
+ help
+ Say Y here to enable the imx27 pinctrl driver
+
config PINCTRL_IMX35
bool "IMX35 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 43bb05e..d08bf87 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
obj-$(CONFIG_PINCTRL_IMX1_CORE) += pinctrl-imx1-core.o
+obj-$(CONFIG_PINCTRL_IMX27) += pinctrl-imx27.o
obj-$(CONFIG_PINCTRL_IMX35) += pinctrl-imx35.o
obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o
obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o
diff --git a/drivers/pinctrl/pinctrl-imx27.c b/drivers/pinctrl/pinctrl-imx27.c
new file mode 100644
index 0000000..417c992
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx27.c
@@ -0,0 +1,477 @@
+/*
+ * imx27 pinctrl driver based on imx pinmux core
+ *
+ * Copyright (C) 2013 Pengutronix
+ *
+ * Author: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx1.h"
+
+#define PAD_ID(port, pin) (port*32 + pin)
+#define PA 0
+#define PB 1
+#define PC 2
+#define PD 3
+#define PE 4
+#define PF 5
+
+enum imx27_pads {
+ MX27_PAD_USBH2_CLK = PAD_ID(PA, 0),
+ MX27_PAD_USBH2_DIR = PAD_ID(PA, 1),
+ MX27_PAD_USBH2_DATA7 = PAD_ID(PA, 2),
+ MX27_PAD_USBH2_NXT = PAD_ID(PA, 3),
+ MX27_PAD_USBH2_STP = PAD_ID(PA, 4),
+ MX27_PAD_LSCLK = PAD_ID(PA, 5),
+ MX27_PAD_LD0 = PAD_ID(PA, 6),
+ MX27_PAD_LD1 = PAD_ID(PA, 7),
+ MX27_PAD_LD2 = PAD_ID(PA, 8),
+ MX27_PAD_LD3 = PAD_ID(PA, 9),
+ MX27_PAD_LD4 = PAD_ID(PA, 10),
+ MX27_PAD_LD5 = PAD_ID(PA, 11),
+ MX27_PAD_LD6 = PAD_ID(PA, 12),
+ MX27_PAD_LD7 = PAD_ID(PA, 13),
+ MX27_PAD_LD8 = PAD_ID(PA, 14),
+ MX27_PAD_LD9 = PAD_ID(PA, 15),
+ MX27_PAD_LD10 = PAD_ID(PA, 16),
+ MX27_PAD_LD11 = PAD_ID(PA, 17),
+ MX27_PAD_LD12 = PAD_ID(PA, 18),
+ MX27_PAD_LD13 = PAD_ID(PA, 19),
+ MX27_PAD_LD14 = PAD_ID(PA, 20),
+ MX27_PAD_LD15 = PAD_ID(PA, 21),
+ MX27_PAD_LD16 = PAD_ID(PA, 22),
+ MX27_PAD_LD17 = PAD_ID(PA, 23),
+ MX27_PAD_REV = PAD_ID(PA, 24),
+ MX27_PAD_CLS = PAD_ID(PA, 25),
+ MX27_PAD_PS = PAD_ID(PA, 26),
+ MX27_PAD_SPL_SPR = PAD_ID(PA, 27),
+ MX27_PAD_HSYNC = PAD_ID(PA, 28),
+ MX27_PAD_VSYNC = PAD_ID(PA, 29),
+ MX27_PAD_CONTRAST = PAD_ID(PA, 30),
+ MX27_PAD_OE_ACD = PAD_ID(PA, 31),
+
+ MX27_PAD_UNUSED0 = PAD_ID(PB, 0),
+ MX27_PAD_UNUSED1 = PAD_ID(PB, 1),
+ MX27_PAD_UNUSED2 = PAD_ID(PB, 2),
+ MX27_PAD_UNUSED3 = PAD_ID(PB, 3),
+ MX27_PAD_SD2_D0 = PAD_ID(PB, 4),
+ MX27_PAD_SD2_D1 = PAD_ID(PB, 5),
+ MX27_PAD_SD2_D2 = PAD_ID(PB, 6),
+ MX27_PAD_SD2_D3 = PAD_ID(PB, 7),
+ MX27_PAD_SD2_CMD = PAD_ID(PB, 8),
+ MX27_PAD_SD2_CLK = PAD_ID(PB, 9),
+ MX27_PAD_CSI_D0 = PAD_ID(PB, 10),
+ MX27_PAD_CSI_D1 = PAD_ID(PB, 11),
+ MX27_PAD_CSI_D2 = PAD_ID(PB, 12),
+ MX27_PAD_CSI_D3 = PAD_ID(PB, 13),
+ MX27_PAD_CSI_D4 = PAD_ID(PB, 14),
+ MX27_PAD_CSI_MCLK = PAD_ID(PB, 15),
+ MX27_PAD_CSI_PIXCLK = PAD_ID(PB, 16),
+ MX27_PAD_CSI_D5 = PAD_ID(PB, 17),
+ MX27_PAD_CSI_D6 = PAD_ID(PB, 18),
+ MX27_PAD_CSI_D7 = PAD_ID(PB, 19),
+ MX27_PAD_CSI_VSYNC = PAD_ID(PB, 20),
+ MX27_PAD_CSI_HSYNC = PAD_ID(PB, 21),
+ MX27_PAD_USBH1_SUSP = PAD_ID(PB, 22),
+ MX27_PAD_USB_PWR = PAD_ID(PB, 23),
+ MX27_PAD_USB_OC_B = PAD_ID(PB, 24),
+ MX27_PAD_USBH1_RCV = PAD_ID(PB, 25),
+ MX27_PAD_USBH1_FS = PAD_ID(PB, 26),
+ MX27_PAD_USBH1_OE_B = PAD_ID(PB, 27),
+ MX27_PAD_USBH1_TXDM = PAD_ID(PB, 28),
+ MX27_PAD_USBH1_TXDP = PAD_ID(PB, 29),
+ MX27_PAD_USBH1_RXDM = PAD_ID(PB, 30),
+ MX27_PAD_USBH1_RXDP = PAD_ID(PB, 31),
+
+ MX27_PAD_UNUSED4 = PAD_ID(PC, 0),
+ MX27_PAD_UNUSED5 = PAD_ID(PC, 1),
+ MX27_PAD_UNUSED6 = PAD_ID(PC, 2),
+ MX27_PAD_UNUSED7 = PAD_ID(PC, 3),
+ MX27_PAD_UNUSED8 = PAD_ID(PC, 4),
+ MX27_PAD_I2C2_SDA = PAD_ID(PC, 5),
+ MX27_PAD_I2C2_SCL = PAD_ID(PC, 6),
+ MX27_PAD_USBOTG_DATA5 = PAD_ID(PC, 7),
+ MX27_PAD_USBOTG_DATA6 = PAD_ID(PC, 8),
+ MX27_PAD_USBOTG_DATA0 = PAD_ID(PC, 9),
+ MX27_PAD_USBOTG_DATA2 = PAD_ID(PC, 10),
+ MX27_PAD_USBOTG_DATA1 = PAD_ID(PC, 11),
+ MX27_PAD_USBOTG_DATA4 = PAD_ID(PC, 12),
+ MX27_PAD_USBOTG_DATA3 = PAD_ID(PC, 13),
+ MX27_PAD_TOUT = PAD_ID(PC, 14),
+ MX27_PAD_TIN = PAD_ID(PC, 15),
+ MX27_PAD_SSI4_FS = PAD_ID(PC, 16),
+ MX27_PAD_SSI4_RXDAT = PAD_ID(PC, 17),
+ MX27_PAD_SSI4_TXDAT = PAD_ID(PC, 18),
+ MX27_PAD_SSI4_CLK = PAD_ID(PC, 19),
+ MX27_PAD_SSI1_FS = PAD_ID(PC, 20),
+ MX27_PAD_SSI1_RXDAT = PAD_ID(PC, 21),
+ MX27_PAD_SSI1_TXDAT = PAD_ID(PC, 22),
+ MX27_PAD_SSI1_CLK = PAD_ID(PC, 23),
+ MX27_PAD_SSI2_FS = PAD_ID(PC, 24),
+ MX27_PAD_SSI2_RXDAT = PAD_ID(PC, 25),
+ MX27_PAD_SSI2_TXDAT = PAD_ID(PC, 26),
+ MX27_PAD_SSI2_CLK = PAD_ID(PC, 27),
+ MX27_PAD_SSI3_FS = PAD_ID(PC, 28),
+ MX27_PAD_SSI3_RXDAT = PAD_ID(PC, 29),
+ MX27_PAD_SSI3_TXDAT = PAD_ID(PC, 30),
+ MX27_PAD_SSI3_CLK = PAD_ID(PC, 31),
+
+ MX27_PAD_SD3_CMD = PAD_ID(PD, 0),
+ MX27_PAD_SD3_CLK = PAD_ID(PD, 1),
+ MX27_PAD_ATA_DATA0 = PAD_ID(PD, 2),
+ MX27_PAD_ATA_DATA1 = PAD_ID(PD, 3),
+ MX27_PAD_ATA_DATA2 = PAD_ID(PD, 4),
+ MX27_PAD_ATA_DATA3 = PAD_ID(PD, 5),
+ MX27_PAD_ATA_DATA4 = PAD_ID(PD, 6),
+ MX27_PAD_ATA_DATA5 = PAD_ID(PD, 7),
+ MX27_PAD_ATA_DATA6 = PAD_ID(PD, 8),
+ MX27_PAD_ATA_DATA7 = PAD_ID(PD, 9),
+ MX27_PAD_ATA_DATA8 = PAD_ID(PD, 10),
+ MX27_PAD_ATA_DATA9 = PAD_ID(PD, 11),
+ MX27_PAD_ATA_DATA10 = PAD_ID(PD, 12),
+ MX27_PAD_ATA_DATA11 = PAD_ID(PD, 13),
+ MX27_PAD_ATA_DATA12 = PAD_ID(PD, 14),
+ MX27_PAD_ATA_DATA13 = PAD_ID(PD, 15),
+ MX27_PAD_ATA_DATA14 = PAD_ID(PD, 16),
+ MX27_PAD_I2C_DATA = PAD_ID(PD, 17),
+ MX27_PAD_I2C_CLK = PAD_ID(PD, 18),
+ MX27_PAD_CSPI2_SS2 = PAD_ID(PD, 19),
+ MX27_PAD_CSPI2_SS1 = PAD_ID(PD, 20),
+ MX27_PAD_CSPI2_SS0 = PAD_ID(PD, 21),
+ MX27_PAD_CSPI2_SCLK = PAD_ID(PD, 22),
+ MX27_PAD_CSPI2_MISO = PAD_ID(PD, 23),
+ MX27_PAD_CSPI2_MOSI = PAD_ID(PD, 24),
+ MX27_PAD_CSPI1_RDY = PAD_ID(PD, 25),
+ MX27_PAD_CSPI1_SS2 = PAD_ID(PD, 26),
+ MX27_PAD_CSPI1_SS1 = PAD_ID(PD, 27),
+ MX27_PAD_CSPI1_SS0 = PAD_ID(PD, 28),
+ MX27_PAD_CSPI1_SCLK = PAD_ID(PD, 29),
+ MX27_PAD_CSPI1_MISO = PAD_ID(PD, 30),
+ MX27_PAD_CSPI1_MOSI = PAD_ID(PD, 31),
+
+ MX27_PAD_USBOTG_NXT = PAD_ID(PE, 0),
+ MX27_PAD_USBOTG_STP = PAD_ID(PE, 1),
+ MX27_PAD_USBOTG_DIR = PAD_ID(PE, 2),
+ MX27_PAD_UART2_CTS = PAD_ID(PE, 3),
+ MX27_PAD_UART2_RTS = PAD_ID(PE, 4),
+ MX27_PAD_PWMO = PAD_ID(PE, 5),
+ MX27_PAD_UART2_TXD = PAD_ID(PE, 6),
+ MX27_PAD_UART2_RXD = PAD_ID(PE, 7),
+ MX27_PAD_UART3_TXD = PAD_ID(PE, 8),
+ MX27_PAD_UART3_RXD = PAD_ID(PE, 9),
+ MX27_PAD_UART3_CTS = PAD_ID(PE, 10),
+ MX27_PAD_UART3_RTS = PAD_ID(PE, 11),
+ MX27_PAD_UART1_TXD = PAD_ID(PE, 12),
+ MX27_PAD_UART1_RXD = PAD_ID(PE, 13),
+ MX27_PAD_UART1_CTS = PAD_ID(PE, 14),
+ MX27_PAD_UART1_RTS = PAD_ID(PE, 15),
+ MX27_PAD_RTCK = PAD_ID(PE, 16),
+ MX27_PAD_RESET_OUT_B = PAD_ID(PE, 17),
+ MX27_PAD_SD1_D0 = PAD_ID(PE, 18),
+ MX27_PAD_SD1_D1 = PAD_ID(PE, 19),
+ MX27_PAD_SD1_D2 = PAD_ID(PE, 20),
+ MX27_PAD_SD1_D3 = PAD_ID(PE, 21),
+ MX27_PAD_SD1_CMD = PAD_ID(PE, 22),
+ MX27_PAD_SD1_CLK = PAD_ID(PE, 23),
+ MX27_PAD_USBOTG_CLK = PAD_ID(PE, 24),
+ MX27_PAD_USBOTG_DATA7 = PAD_ID(PE, 25),
+ MX27_PAD_UNUSED9 = PAD_ID(PE, 26),
+ MX27_PAD_UNUSED10 = PAD_ID(PE, 27),
+ MX27_PAD_UNUSED11 = PAD_ID(PE, 28),
+ MX27_PAD_UNUSED12 = PAD_ID(PE, 29),
+ MX27_PAD_UNUSED13 = PAD_ID(PE, 30),
+ MX27_PAD_UNUSED14 = PAD_ID(PE, 31),
+
+ MX27_PAD_NFRB = PAD_ID(PF, 0),
+ MX27_PAD_NFCLE = PAD_ID(PF, 1),
+ MX27_PAD_NFWP_B = PAD_ID(PF, 2),
+ MX27_PAD_NFCE_B = PAD_ID(PF, 3),
+ MX27_PAD_NFALE = PAD_ID(PF, 4),
+ MX27_PAD_NFRE_B = PAD_ID(PF, 5),
+ MX27_PAD_NFWE_B = PAD_ID(PF, 6),
+ MX27_PAD_PC_POE = PAD_ID(PF, 7),
+ MX27_PAD_PC_RW_B = PAD_ID(PF, 8),
+ MX27_PAD_IOIS16 = PAD_ID(PF, 9),
+ MX27_PAD_PC_RST = PAD_ID(PF, 10),
+ MX27_PAD_PC_BVD2 = PAD_ID(PF, 11),
+ MX27_PAD_PC_BVD1 = PAD_ID(PF, 12),
+ MX27_PAD_PC_VS2 = PAD_ID(PF, 13),
+ MX27_PAD_PC_VS1 = PAD_ID(PF, 14),
+ MX27_PAD_CLKO = PAD_ID(PF, 15),
+ MX27_PAD_PC_PWRON = PAD_ID(PF, 16),
+ MX27_PAD_PC_READY = PAD_ID(PF, 17),
+ MX27_PAD_PC_WAIT_B = PAD_ID(PF, 18),
+ MX27_PAD_PC_CD2_B = PAD_ID(PF, 19),
+ MX27_PAD_PC_CD1_B = PAD_ID(PF, 20),
+ MX27_PAD_CS4_B = PAD_ID(PF, 21),
+ MX27_PAD_CS5_B = PAD_ID(PF, 22),
+ MX27_PAD_ATA_DATA15 = PAD_ID(PF, 23),
+ MX27_PAD_UNUSED15 = PAD_ID(PF, 24),
+ MX27_PAD_UNUSED16 = PAD_ID(PF, 25),
+ MX27_PAD_UNUSED17 = PAD_ID(PF, 26),
+ MX27_PAD_UNUSED18 = PAD_ID(PF, 27),
+ MX27_PAD_UNUSED19 = PAD_ID(PF, 28),
+ MX27_PAD_UNUSED20 = PAD_ID(PF, 29),
+ MX27_PAD_UNUSED21 = PAD_ID(PF, 30),
+ MX27_PAD_UNUSED22 = PAD_ID(PF, 31),
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx27_pinctrl_pads[] = {
+ IMX_PINCTRL_PIN(MX27_PAD_USBH2_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH2_DIR),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH2_DATA7),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH2_NXT),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH2_STP),
+ IMX_PINCTRL_PIN(MX27_PAD_LSCLK),
+ IMX_PINCTRL_PIN(MX27_PAD_LD0),
+ IMX_PINCTRL_PIN(MX27_PAD_LD1),
+ IMX_PINCTRL_PIN(MX27_PAD_LD2),
+ IMX_PINCTRL_PIN(MX27_PAD_LD3),
+ IMX_PINCTRL_PIN(MX27_PAD_LD4),
+ IMX_PINCTRL_PIN(MX27_PAD_LD5),
+ IMX_PINCTRL_PIN(MX27_PAD_LD6),
+ IMX_PINCTRL_PIN(MX27_PAD_LD7),
+ IMX_PINCTRL_PIN(MX27_PAD_LD8),
+ IMX_PINCTRL_PIN(MX27_PAD_LD9),
+ IMX_PINCTRL_PIN(MX27_PAD_LD10),
+ IMX_PINCTRL_PIN(MX27_PAD_LD11),
+ IMX_PINCTRL_PIN(MX27_PAD_LD12),
+ IMX_PINCTRL_PIN(MX27_PAD_LD13),
+ IMX_PINCTRL_PIN(MX27_PAD_LD14),
+ IMX_PINCTRL_PIN(MX27_PAD_LD15),
+ IMX_PINCTRL_PIN(MX27_PAD_LD16),
+ IMX_PINCTRL_PIN(MX27_PAD_LD17),
+ IMX_PINCTRL_PIN(MX27_PAD_REV),
+ IMX_PINCTRL_PIN(MX27_PAD_CLS),
+ IMX_PINCTRL_PIN(MX27_PAD_PS),
+ IMX_PINCTRL_PIN(MX27_PAD_SPL_SPR),
+ IMX_PINCTRL_PIN(MX27_PAD_HSYNC),
+ IMX_PINCTRL_PIN(MX27_PAD_VSYNC),
+ IMX_PINCTRL_PIN(MX27_PAD_CONTRAST),
+ IMX_PINCTRL_PIN(MX27_PAD_OE_ACD),
+
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED0),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED1),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED2),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED3),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_D0),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_D1),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_D2),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_D3),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_CMD),
+ IMX_PINCTRL_PIN(MX27_PAD_SD2_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D0),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D1),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D2),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D3),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D4),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_MCLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_PIXCLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D5),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D6),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_D7),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_VSYNC),
+ IMX_PINCTRL_PIN(MX27_PAD_CSI_HSYNC),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_SUSP),
+ IMX_PINCTRL_PIN(MX27_PAD_USB_PWR),
+ IMX_PINCTRL_PIN(MX27_PAD_USB_OC_B),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_RCV),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_FS),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_OE_B),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDM),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDP),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDM),
+ IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDP),
+
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED4),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED5),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED6),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED7),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED8),
+ IMX_PINCTRL_PIN(MX27_PAD_I2C2_SDA),
+ IMX_PINCTRL_PIN(MX27_PAD_I2C2_SCL),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA5),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA6),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA0),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA2),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA1),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA4),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA3),
+ IMX_PINCTRL_PIN(MX27_PAD_TOUT),
+ IMX_PINCTRL_PIN(MX27_PAD_TIN),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI4_FS),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI4_RXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI4_TXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI4_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI1_FS),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI1_RXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI1_TXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI1_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI2_FS),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI2_RXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI2_TXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI2_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI3_FS),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI3_RXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI3_TXDAT),
+ IMX_PINCTRL_PIN(MX27_PAD_SSI3_CLK),
+
+ IMX_PINCTRL_PIN(MX27_PAD_SD3_CMD),
+ IMX_PINCTRL_PIN(MX27_PAD_SD3_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA0),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA1),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA2),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA3),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA4),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA5),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA6),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA7),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA8),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA9),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA10),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA11),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA12),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA13),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA14),
+ IMX_PINCTRL_PIN(MX27_PAD_I2C_DATA),
+ IMX_PINCTRL_PIN(MX27_PAD_I2C_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS2),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS1),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS0),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SCLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MISO),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MOSI),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_RDY),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS2),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS1),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS0),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SCLK),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MISO),
+ IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MOSI),
+
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_NXT),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_STP),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DIR),
+ IMX_PINCTRL_PIN(MX27_PAD_UART2_CTS),
+ IMX_PINCTRL_PIN(MX27_PAD_UART2_RTS),
+ IMX_PINCTRL_PIN(MX27_PAD_PWMO),
+ IMX_PINCTRL_PIN(MX27_PAD_UART2_TXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART2_RXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART3_TXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART3_RXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART3_CTS),
+ IMX_PINCTRL_PIN(MX27_PAD_UART3_RTS),
+ IMX_PINCTRL_PIN(MX27_PAD_UART1_TXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART1_RXD),
+ IMX_PINCTRL_PIN(MX27_PAD_UART1_CTS),
+ IMX_PINCTRL_PIN(MX27_PAD_UART1_RTS),
+ IMX_PINCTRL_PIN(MX27_PAD_RTCK),
+ IMX_PINCTRL_PIN(MX27_PAD_RESET_OUT_B),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_D0),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_D1),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_D2),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_D3),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_CMD),
+ IMX_PINCTRL_PIN(MX27_PAD_SD1_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_CLK),
+ IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA7),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED9),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED10),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED11),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED12),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED13),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED14),
+
+ IMX_PINCTRL_PIN(MX27_PAD_NFRB),
+ IMX_PINCTRL_PIN(MX27_PAD_NFCLE),
+ IMX_PINCTRL_PIN(MX27_PAD_NFWP_B),
+ IMX_PINCTRL_PIN(MX27_PAD_NFCE_B),
+ IMX_PINCTRL_PIN(MX27_PAD_NFALE),
+ IMX_PINCTRL_PIN(MX27_PAD_NFRE_B),
+ IMX_PINCTRL_PIN(MX27_PAD_NFWE_B),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_POE),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_RW_B),
+ IMX_PINCTRL_PIN(MX27_PAD_IOIS16),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_RST),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_BVD2),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_BVD1),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_VS2),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_VS1),
+ IMX_PINCTRL_PIN(MX27_PAD_CLKO),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_PWRON),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_READY),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_WAIT_B),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_CD2_B),
+ IMX_PINCTRL_PIN(MX27_PAD_PC_CD1_B),
+ IMX_PINCTRL_PIN(MX27_PAD_CS4_B),
+ IMX_PINCTRL_PIN(MX27_PAD_CS5_B),
+ IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA15),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED15),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED16),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED17),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED18),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED19),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED20),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED21),
+ IMX_PINCTRL_PIN(MX27_PAD_UNUSED22),
+};
+
+static struct imx1_pinctrl_soc_info imx27_pinctrl_info = {
+ .pins = imx27_pinctrl_pads,
+ .npins = ARRAY_SIZE(imx27_pinctrl_pads),
+};
+
+static struct of_device_id imx27_pinctrl_of_match[] = {
+ { .compatible = "fsl,imx27-iomuxc", },
+ { /* sentinel */ }
+};
+
+struct imx27_pinctrl_private {
+ int num_gpio_childs;
+ struct platform_device **gpio_dev;
+ struct mxc_gpio_platform_data *gpio_pdata;
+};
+
+static int imx27_pinctrl_probe(struct platform_device *pdev)
+{
+ return imx1_pinctrl_core_probe(pdev, &imx27_pinctrl_info);
+}
+
+static struct platform_driver imx27_pinctrl_driver = {
+ .driver = {
+ .name = "imx27-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(imx27_pinctrl_of_match),
+ },
+ .probe = imx27_pinctrl_probe,
+ .remove = imx1_pinctrl_core_remove,
+};
+
+static int __init imx27_pinctrl_init(void)
+{
+ return platform_driver_register(&imx27_pinctrl_driver);
+}
+arch_initcall(imx27_pinctrl_init);
+
+static void __exit imx27_pinctrl_exit(void)
+{
+ platform_driver_unregister(&imx27_pinctrl_driver);
+}
+module_exit(imx27_pinctrl_exit);
+MODULE_AUTHOR("Markus Pargmann <mpa@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Freescale IMX27 pinctrl driver");
+MODULE_LICENSE("GPL v2");
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
