Patch adds DT support for MC13783/MC13892 PMICs. Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx> --- Documentation/devicetree/bindings/mfd/mc13xxx.txt | 13 +++++ drivers/input/misc/mc13783-pwrbutton.c | 61 +++++++++++++++++------ 2 files changed, 60 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index abd9e3c..cf8b61c 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -10,6 +10,12 @@ Optional properties: - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used Sub-nodes: +- buttons : Contain power button nodes. Each button should be declared as + "button@<num>" and contain code in "linux,code" property. + Optional properties: + active-high : Change active button level from 0 to 1. + enable-reset: Performs hadware reset through PMIC. + debounce : Debounce value which will be taken from PMIC datasheet. - regulators : Contain the regulator nodes. The regulators are bound using their names as listed below with their registers and bits for enabling. @@ -89,6 +95,13 @@ ecspi@70010000 { /* ECSPI1 */ interrupt-parent = <&gpio0>; interrupts = <8>; + buttons { + button@1 { + linux,code = <0x1f>; + debounce = <1>; + }; + }; + regulators { sw1_reg: mc13892__sw1 { regulator-min-microvolt = <600000>; diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c index 2e21f19..3f9cfd1 100644 --- a/drivers/input/misc/mc13783-pwrbutton.c +++ b/drivers/input/misc/mc13783-pwrbutton.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/input.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/mfd/mc13783.h> #include <linux/mfd/mc13892.h> @@ -77,21 +78,28 @@ static int __init mc13xxx_pwrbutton_probe(struct platform_device *pdev) struct mc13xxx *mc13xxx = dev_get_drvdata(pdev->dev.parent); struct mc13xxx_pwrb_devtype *devtype = (struct mc13xxx_pwrb_devtype *)pdev->id_entry->driver_data; + struct device_node *parent, *child; struct mc13xxx_pwrb *priv; int i, reg = 0, ret = -EINVAL; - if (!pdata) { + of_node_get(pdev->dev.parent->of_node); + parent = of_find_node_by_name(pdev->dev.parent->of_node, "buttons"); + if (!pdata && !parent) { dev_err(&pdev->dev, "Missing platform data\n"); return -ENODEV; } priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; + if (!priv) { + ret = -ENOMEM; + goto out_node_put; + } priv->input = devm_input_allocate_device(&pdev->dev); - if (!priv->input) - return -ENOMEM; + if (!priv->input) { + ret = -ENOMEM; + goto out_node_put; + } priv->mc13xxx = mc13xxx; priv->devtype = devtype; @@ -99,15 +107,36 @@ static int __init mc13xxx_pwrbutton_probe(struct platform_device *pdev) for (i = 0; i < MAX13XXX_NUM_BUTTONS; i++) { u16 code, invert, reset, debounce; - - if (!(pdata->buttons[i].flags & MC13XXX_BUTTON_ENABLE)) - continue; - code = pdata->buttons[i].keycode; - invert = !!(pdata->buttons[i].flags & - MC13XXX_BUTTON_POL_INVERT); - reset = !!(pdata->buttons[i].flags & - MC13XXX_BUTTON_RESET_EN); - debounce = pdata->buttons[i].flags; + const __be32 *prop; + char childname[5]; + + if (parent) { + sprintf(childname, "button@%i", i + 1); + child = of_get_child_by_name(parent, childname); + if (!child) + continue; + prop = of_get_property(child, "linux,code", NULL); + if (prop) + code = be32_to_cpu(*prop) & 0xffff; + else { + dev_err(&pdev->dev, + "Button %i: Missing key code\n", i + 1); + continue; + } + invert = of_property_read_bool(child, "active-high"); + reset = of_property_read_bool(child, "enable-reset"); + prop = of_get_property(child, "debounce", NULL); + debounce = prop ? be32_to_cpu(*prop) : 0; + } else { + if (!(pdata->buttons[i].flags & MC13XXX_BUTTON_ENABLE)) + continue; + code = pdata->buttons[i].keycode; + invert = !!(pdata->buttons[i].flags & + MC13XXX_BUTTON_POL_INVERT); + reset = !!(pdata->buttons[i].flags & + MC13XXX_BUTTON_RESET_EN); + debounce = pdata->buttons[i].flags; + } priv->btn_code[i] = code; if (code != KEY_RESERVED) @@ -155,6 +184,10 @@ static int __init mc13xxx_pwrbutton_probe(struct platform_device *pdev) if (ret) dev_err(&pdev->dev, "Can't register input device: %i\n", ret); +out_node_put: + if (parent) + of_node_put(parent); + return ret; } -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html