Add a new driver for the ambient light/proximity sensor
device. The driver exposes three channels: light_clear
light_ir and proximity. It also supports triggered buffer,
high and low ambient light threshold event and proximity
detection events.
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/iio/light/Kconfig | 12 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/gp2ap020a00f.c | 1470 ++++++++++++++++++++++++++++++++++++++
3 files changed, 1483 insertions(+), 0 deletions(-)
create mode 100644 drivers/iio/light/gp2ap020a00f.c
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index bf9fa0d..0b809a6 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -27,6 +27,18 @@ config APDS9300
To compile this driver as a module, choose M here: the
module will be called apds9300.
+config GP2AP020A00F
+ tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say Y here if you have a Sharp GP2AP020A00F proximity/als combo-chip
+ hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gp2ap020a00f.
+
config HID_SENSOR_ALS
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 354ee9a..2eb6294 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -5,6 +5,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_ADJD_S311) += adjd_s311.o
obj-$(CONFIG_APDS9300) += apds9300.o
+obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
new file mode 100644
index 0000000..2ecb738
--- /dev/null
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -0,0 +1,1470 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
+ *
+ * IIO features supported by the driver:
+ *
+ * Read-only raw channels:
+ * - illiminance_clear
+ * - illiminance_ir
+ * - proximity
+ *
+ * Triggered buffer:
+ * - illiminance_clear
+ * - illiminance_ir
+ * - proximity
+ *
+ * Events:
+ * - illuminance_clear (rising and falling)
+ * - proximity (rising and falling)
+ * - both falling and rising thresholds for the proximity events
+ * must be set to the values greater than 0 - if they aren't they
+ * will be adjusted respectively to 10 and 11 upon enabling an event.
+ *
+ * The driver supports triggered buffers for all the three
+ * channels as well as rising and falling events for the
+ * illuminance_clear and proxmimity channels. Triggers
+ * can be enabled simultaneously with both illuminance_clear
+ * events. Proximity events cannot be enabled simultaneously
+ * with any triggers or illuminance events. Enabling/disabling
+ * one of the proximity events automatically enables/disables
+ * the other one.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <linux/debugfs.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define GP2A_I2C_NAME "gp2ap020a00f"
+
+/* Registers */
+#define GP2AP020A00F_OP_REG 0x00 /* Basic operations */
+#define GP2AP020A00F_ALS_REG 0x01 /* ALS related settings */
+#define GP2AP020A00F_PS_REG 0x02 /* PS related settings */
+#define GP2AP020A00F_LED_REG 0x03 /* LED reg */
+#define GP2AP020A00F_TL_L_REG 0x04 /* ALS: Threshold low LSB */
+#define GP2AP020A00F_TL_H_REG 0x05 /* ALS: Threshold low MSB */
+#define GP2AP020A00F_TH_L_REG 0x06 /* ALS: Threshold high LSB */
+#define GP2AP020A00F_TH_H_REG 0x07 /* ALS: Threshold high MSB */
+#define GP2AP020A00F_PL_L_REG 0x08 /* PS: Threshold low LSB */
+#define GP2AP020A00F_PL_H_REG 0x09 /* PS: Threshold low MSB */
+#define GP2AP020A00F_PH_L_REG 0x0a /* PS: Threshold high LSB */
+#define GP2AP020A00F_PH_H_REG 0x0b /* PS: Threshold high MSB */
+#define GP2AP020A00F_D0_L_REG 0x0c /* ALS result: Clear/Illuminance LSB */
+#define GP2AP020A00F_D0_H_REG 0x0d /* ALS result: Clear/Illuminance MSB */
+#define GP2AP020A00F_D1_L_REG 0x0e /* ALS result: IR LSB */
+#define GP2AP020A00F_D1_H_REG 0x0f /* ALS result: IR LSB */
+#define GP2AP020A00F_D2_L_REG 0x10 /* PS result LSB */
+#define GP2AP020A00F_D2_H_REG 0x11 /* PS result MSB */
+#define GP2AP020A00F_NUM_REGS 0x12 /* Number of registers */
+
+/* OP_REG bits */
+#define GP2AP020A00F_OP3_MASK 0x80 /* Software shutdown */
+#define GP2AP020A00F_OP3_SHUTDOWN 0x00
+#define GP2AP020A00F_OP3_OPERATION 0x80
+#define GP2AP020A00F_OP2_MASK 0x40 /* Auto shutdown/Continuous mode */
+#define GP2AP020A00F_OP2_AUTO_SHUTDOWN 0x00
+#define GP2AP020A00F_OP2_CONT_OPERATION 0x40
+#define GP2AP020A00F_OP_MASK 0x30 /* Operating mode selection */
+#define GP2AP020A00F_OP_ALS_AND_PS 0x00
+#define GP2AP020A00F_OP_ALS 0x10
+#define GP2AP020A00F_OP_PS 0x20
+#define GP2AP020A00F_OP_DEBUG 0x30
+#define GP2AP020A00F_PROX_MASK 0x08 /* PS: detection/non-detection */
+#define GP2AP020A00F_PROX_NON_DETECT 0x00
+#define GP2AP020A00F_PROX_DETECT 0x08
+#define GP2AP020A00F_FLAG_P 0x04 /* PS: interrupt result */
+#define GP2AP020A00F_FLAG_A 0x02 /* ALS: interrupt result */
+#define GP2AP020A00F_TYPE_MASK 0x01 /* Output data type selection */
+#define GP2AP020A00F_TYPE_MANUAL_CALC 0x00
+#define GP2AP020A00F_TYPE_AUTO_CALC 0x01
+
+/* ALS_REG bits */
+#define GP2AP020A00F_PRST_MASK 0xc0 /* Number of measurement cycles */
+#define GP2AP020A00F_PRST_ONCE 0x00
+#define GP2AP020A00F_PRST_4_CYCLES 0x40
+#define GP2AP020A00F_PRST_8_CYCLES 0x80
+#define GP2AP020A00F_PRST_16_CYCLES 0xc0
+#define GP2AP020A00F_RES_A_MASK 0x38 /* ALS: Resolution */
+#define GP2AP020A00F_RES_A_800ms 0x00
+#define GP2AP020A00F_RES_A_400ms 0x08
+#define GP2AP020A00F_RES_A_200ms 0x10
+#define GP2AP020A00F_RES_A_100ms 0x18
+#define GP2AP020A00F_RES_A_25ms 0x20
+#define GP2AP020A00F_RES_A_6_25ms 0x28
+#define GP2AP020A00F_RES_A_1_56ms 0x30
+#define GP2AP020A00F_RES_A_0_39ms 0x38
+#define GP2AP020A00F_RANGE_A_MASK 0x07 /* ALS: Max measurable range */
+#define GP2AP020A00F_RANGE_A_x1 0x00
+#define GP2AP020A00F_RANGE_A_x2 0x01
+#define GP2AP020A00F_RANGE_A_x4 0x02
+#define GP2AP020A00F_RANGE_A_x8 0x03
+#define GP2AP020A00F_RANGE_A_x16 0x04
+#define GP2AP020A00F_RANGE_A_x32 0x05
+#define GP2AP020A00F_RANGE_A_x64 0x06
+#define GP2AP020A00F_RANGE_A_x128 0x07
+
+/* PS_REG bits */
+#define GP2AP020A00F_ALC_MASK 0x80 /* Auto light cancel */
+#define GP2AP020A00F_ALC_ON 0x80
+#define GP2AP020A00F_ALC_OFF 0x00
+#define GP2AP020A00F_INTTYPE_MASK 0x40 /* Interrupt type setting */
+#define GP2AP020A00F_INTTYPE_LEVEL 0x00
+#define GP2AP020A00F_INTTYPE_PULSE 0x40
+#define GP2AP020A00F_RES_P_MASK 0x38 /* PS: Resolution */
+#define GP2AP020A00F_RES_P_800ms_x2 0x00
+#define GP2AP020A00F_RES_P_400ms_x2 0x08
+#define GP2AP020A00F_RES_P_200ms_x2 0x10
+#define GP2AP020A00F_RES_P_100ms_x2 0x18
+#define GP2AP020A00F_RES_P_25ms_x2 0x20
+#define GP2AP020A00F_RES_P_6_25ms_x2 0x28
+#define GP2AP020A00F_RES_P_1_56ms_x2 0x30
+#define GP2AP020A00F_RES_P_0_39ms_x2 0x38
+#define GP2AP020A00F_RANGE_P_MASK 0x07 /* PS: Max measurable range */
+#define GP2AP020A00F_RANGE_P_x1 0x00
+#define GP2AP020A00F_RANGE_P_x2 0x01
+#define GP2AP020A00F_RANGE_P_x4 0x02
+#define GP2AP020A00F_RANGE_P_x8 0x03
+#define GP2AP020A00F_RANGE_P_x16 0x04
+#define GP2AP020A00F_RANGE_P_x32 0x05
+#define GP2AP020A00F_RANGE_P_x64 0x06
+#define GP2AP020A00F_RANGE_P_x128 0x07
+
+/* LED reg bits */
+#define GP2AP020A00F_INTVAL_MASK 0xc0 /* Intermittent operating */
+#define GP2AP020A00F_INTVAL_0 0x00
+#define GP2AP020A00F_INTVAL_4 0x40
+#define GP2AP020A00F_INTVAL_8 0x80
+#define GP2AP020A00F_INTVAL_16 0xc0
+#define GP2AP020A00F_IS_MASK 0x30 /* ILED drive peak current */
+#define GP2AP020A00F_IS_13_8mA 0x00
+#define GP2AP020A00F_IS_27_5mA 0x10
+#define GP2AP020A00F_IS_55mA 0x20
+#define GP2AP020A00F_IS_110mA 0x30
+#define GP2AP020A00F_PIN_MASK 0x0c /* INT terminal setting */
+#define GP2AP020A00F_PIN_ALS_OR_PS 0x00
+#define GP2AP020A00F_PIN_ALS 0x04
+#define GP2AP020A00F_PIN_PS 0x08
+#define GP2AP020A00F_PIN_PS_DETECT 0x0c
+#define GP2AP020A00F_FREQ_MASK 0x02 /* LED modulation frequency */
+#define GP2AP020A00F_FREQ_327_5kHz 0x00
+#define GP2AP020A00F_FREQ_81_8kHz 0x02
+#define GP2AP020A00F_RST 0x01 /* Software reset */
+
+#define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR 0
+#define GP2AP020A00F_SCAN_MODE_LIGHT_IR 1
+#define GP2AP020A00F_SCAN_MODE_PROXIMITY 2
+#define GP2AP020A00F_CHAN_TIMESTAMP 3
+
+#define GP2AP020A00F_DATA_READY_TIMEOUT msecs_to_jiffies(1000)
+
+#define GP2AP020A00F_DATA_REG(chan) (GP2AP020A00F_D0_L_REG + \
+ (chan) * 2)
+#define GP2AP020A00F_THRESH_VAL_ID(reg_addr) ((reg_addr - 4) / 2)
+
+#define GP2AP020A00F_SUBTRACT_MODE 0
+#define GP2AP020A00F_ADD_MODE 1
+
+#define GP2AP020A00F_MAX_CHANNELS 3
+
+enum gp2ap020a00f_opmode {
+ GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
+ GP2AP020A00F_OPMODE_READ_RAW_IR,
+ GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_OPMODE_PS,
+ GP2AP020A00F_OPMODE_ALS_AND_PS,
+ GP2AP020A00F_OPMODE_PROX_DETECT,
+ GP2AP020A00F_OPMODE_SHUTDOWN,
+ GP2AP020A00F_NUM_OPMODES,
+};
+
+enum gp2ap020a00f_cmd {
+ GP2AP020A00F_CMD_READ_RAW_CLEAR,
+ GP2AP020A00F_CMD_READ_RAW_IR,
+ GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
+ GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
+ GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
+ GP2AP020A00F_CMD_TRIGGER_IR_EN,
+ GP2AP020A00F_CMD_TRIGGER_IR_DIS,
+ GP2AP020A00F_CMD_TRIGGER_PROX_EN,
+ GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
+ GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
+ GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
+ GP2AP020A00F_CMD_ALS_LOW_EV_EN,
+ GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
+ GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
+ GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
+ GP2AP020A00F_CMD_PROX_LOW_EV_EN,
+ GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
+};
+
+enum gp2ap020a00f_flags {
+ GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
+ GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
+ GP2AP020A00F_FLAG_PROX_TRIGGER,
+ GP2AP020A00F_FLAG_PROX_RISING_EVENT,
+ GP2AP020A00F_FLAG_PROX_FALLING_EVENT,
+ GP2AP020A00F_FLAG_ALS_RISING_EVENT,
+ GP2AP020A00F_FLAG_ALS_FALLING_EVENT,
+ GP2AP020A00F_FLAG_LUX_MODE_HIGH,
+};
+
+enum gp2ap020a00f_thresh_buf_id {
+ GP2AP020A00F_THRESH_TL,
+ GP2AP020A00F_THRESH_TH,
+ GP2AP020A00F_THRESH_PL,
+ GP2AP020A00F_THRESH_PH,
+};
+
+struct gp2ap020a00f_data {
+ const struct gp2ap020a00f_platform_data *pdata;
+ struct i2c_client *client;
+ struct mutex lock;
+ char *buffer;
+ struct regulator *vled_reg;
+ unsigned long flags;
+ enum gp2ap020a00f_opmode cur_opmode;
+ struct iio_trigger *trig;
+ struct regmap *regmap;
+ unsigned int thresh_reg_val[4];
+ u8 debug_reg_addr;
+};
+
+static const u8 gp2ap020a00f_reg_init_tab[] = {
+ [GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
+ [GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
+ GP2AP020A00F_RANGE_A_x8,
+ [GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
+ GP2AP020A00F_RES_P_1_56ms_x2 |
+ GP2AP020A00F_RANGE_P_x4,
+ [GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
+ GP2AP020A00F_IS_110mA |
+ GP2AP020A00F_FREQ_327_5kHz,
+ [GP2AP020A00F_TL_L_REG] = 0,
+ [GP2AP020A00F_TL_H_REG] = 0,
+ [GP2AP020A00F_TH_L_REG] = 0,
+ [GP2AP020A00F_TH_H_REG] = 0,
+ [GP2AP020A00F_PL_L_REG] = 0,
+ [GP2AP020A00F_PL_H_REG] = 0,
+ [GP2AP020A00F_PH_L_REG] = 0,
+ [GP2AP020A00F_PH_H_REG] = 0,
+};
+
+static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case GP2AP020A00F_OP_REG:
+ case GP2AP020A00F_D0_L_REG:
+ case GP2AP020A00F_D0_H_REG:
+ case GP2AP020A00F_D1_L_REG:
+ case GP2AP020A00F_D1_H_REG:
+ case GP2AP020A00F_D2_L_REG:
+ case GP2AP020A00F_D2_H_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config gp2ap020a00f_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = GP2AP020A00F_D2_H_REG,
+ .cache_type = REGCACHE_RBTREE,
+
+ .volatile_reg = gp2ap020a00f_is_volatile_reg,
+};
+
+static const struct gp2ap020a00f_mutable_config_regs {
+ u8 op_reg;
+ u8 als_reg;
+ u8 ps_reg;
+ u8 led_reg;
+} opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
+ [GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
+ GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_AUTO_SHUTDOWN
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_ONCE,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_ALS
+ },
+ [GP2AP020A00F_OPMODE_READ_RAW_IR] = {
+ GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_AUTO_SHUTDOWN
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_ONCE,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_ALS
+ },
+ [GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
+ GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_AUTO_SHUTDOWN
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_ONCE,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_PS
+ },
+ [GP2AP020A00F_OPMODE_PROX_DETECT] = {
+ GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_4_CYCLES,
+ GP2AP020A00F_INTTYPE_PULSE,
+ GP2AP020A00F_PIN_PS_DETECT
+ },
+ [GP2AP020A00F_OPMODE_ALS] = {
+ GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_ONCE,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_ALS
+ },
+ [GP2AP020A00F_OPMODE_PS] = {
+ GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_4_CYCLES,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_PS
+ },
+ [GP2AP020A00F_OPMODE_ALS_AND_PS] = {
+ GP2AP020A00F_OP_ALS_AND_PS
+ | GP2AP020A00F_OP2_CONT_OPERATION
+ | GP2AP020A00F_OP3_OPERATION
+ | GP2AP020A00F_TYPE_MANUAL_CALC,
+ GP2AP020A00F_PRST_4_CYCLES,
+ GP2AP020A00F_INTTYPE_LEVEL,
+ GP2AP020A00F_PIN_ALS_OR_PS
+ },
+ [GP2AP020A00F_OPMODE_SHUTDOWN] = {
+ GP2AP020A00F_OP3_SHUTDOWN,
+ },
+};
+
+static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
+ enum gp2ap020a00f_opmode op)
+{
+ unsigned int op_reg_val;
+ int err;
+
+ if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
+ err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
+ &op_reg_val);
+ if (err < 0)
+ return err;
+ /*
+ * Shutdown the device if the operation being executed entails
+ * mode transition.
+ */
+ if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
+ (op_reg_val & GP2AP020A00F_OP_MASK)) {
+ /* set shutdown mode */
+ err = regmap_update_bits(data->regmap,
+ GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
+ GP2AP020A00F_OP3_SHUTDOWN);
+ if (err < 0)
+ return err;
+ }
+
+ err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
+ GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
+ .als_reg);
+ if (err < 0)
+ return err;
+
+ err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
+ GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
+ .ps_reg);
+ if (err < 0)
+ return err;
+
+ err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
+ GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
+ .led_reg);
+ if (err < 0)
+ return err;
+ }
+
+ /* Set OP_REG and apply operation mode (power on / off) */
+ err = regmap_update_bits(data->regmap,
+ GP2AP020A00F_OP_REG,
+ GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
+ GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
+ opmode_regs_settings[op].op_reg);
+ if (err < 0)
+ return err;
+
+ data->cur_opmode = op;
+
+ return 0;
+}
+
+static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
+{
+ return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
+ &data->flags) ||
+ test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
+ &data->flags) ||
+ test_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT,
+ &data->flags) ||
+ test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT,
+ &data->flags);
+}
+
+static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
+{
+ return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EVENT,
+ &data->flags) ||
+ test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EVENT,
+ &data->flags);
+}
+
+static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
+ enum gp2ap020a00f_opmode diff_mode, int add_sub)
+{
+ enum gp2ap020a00f_opmode new_mode;
+ int err;
+
+ if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
+ diff_mode != GP2AP020A00F_OPMODE_PS)
+ return -EINVAL;
+
+ if (add_sub == GP2AP020A00F_ADD_MODE) {
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
+ new_mode = diff_mode;
+ else
+ new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
+ } else {
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
+ new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
+ GP2AP020A00F_OPMODE_PS :
+ GP2AP020A00F_OPMODE_ALS;
+ else
+ new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
+ }
+
+ err = gp2ap020a00f_set_operation_mode(data, new_mode);
+
+ return err;
+}
+
+static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
+ enum gp2ap020a00f_cmd cmd)
+{
+ __le16 thresh_buf = 0;
+ int err = 0;
+
+ switch (cmd) {
+ case GP2AP020A00F_CMD_READ_RAW_CLEAR:
+ if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+ return -EBUSY;
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
+ break;
+ case GP2AP020A00F_CMD_READ_RAW_IR:
+ if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+ return -EBUSY;
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_READ_RAW_IR);
+ break;
+ case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
+ if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
+ return -EBUSY;
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+ return -EBUSY;
+ if (!gp2ap020a00f_als_enabled(data))
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_ADD_MODE);
+ set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
+ clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
+ if (gp2ap020a00f_als_enabled(data))
+ break;
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_SUBTRACT_MODE);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_IR_EN:
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+ return -EBUSY;
+ if (!gp2ap020a00f_als_enabled(data))
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_ADD_MODE);
+ set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
+ clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
+ if (gp2ap020a00f_als_enabled(data))
+ break;
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_SUBTRACT_MODE);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+ return -EBUSY;
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_PS,
+ GP2AP020A00F_ADD_MODE);
+ set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+ break;
+ case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
+ clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_PS,
+ GP2AP020A00F_SUBTRACT_MODE);
+ break;
+ case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+ return -EBUSY;
+ if (!gp2ap020a00f_als_enabled(data)) {
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_ADD_MODE);
+ if (err < 0)
+ return err;
+ }
+ set_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT, &data->flags);
+ thresh_buf = cpu_to_le16(
+ data->thresh_reg_val[GP2AP020A00F_THRESH_TH]);
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_TH_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
+ clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT, &data->flags);
+ if (!gp2ap020a00f_als_enabled(data)) {
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_SUBTRACT_MODE);
+ if (err < 0)
+ return err;
+ }
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_TH_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
+ if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
+ return -EBUSY;
+ if (!gp2ap020a00f_als_enabled(data)) {
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_ADD_MODE);
+ if (err < 0)
+ return err;
+ }
+ set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT, &data->flags);
+ thresh_buf = cpu_to_le16(
+ data->thresh_reg_val[GP2AP020A00F_THRESH_TL]);
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_TL_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
+ clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT, &data->flags);
+ if (!gp2ap020a00f_als_enabled(data)) {
+ err = gp2ap020a00f_alter_opmode(data,
+ GP2AP020A00F_OPMODE_ALS,
+ GP2AP020A00F_SUBTRACT_MODE);
+ if (err < 0)
+ return err;
+ }
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_TL_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
+ if (gp2ap020a00f_als_enabled(data) ||
+ data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+ return -EBUSY;
+ if (!gp2ap020a00f_prox_detect_enabled(data)) {
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_PROX_DETECT);
+ if (err < 0)
+ return err;
+ }
+ set_bit(GP2AP020A00F_FLAG_PROX_RISING_EVENT, &data->flags);
+ thresh_buf = cpu_to_le16(
+ data->thresh_reg_val[GP2AP020A00F_THRESH_PH]);
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_PH_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
+ clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EVENT, &data->flags);
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_SHUTDOWN);
+ if (err < 0)
+ return err;
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_PH_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
+ if (gp2ap020a00f_als_enabled(data) ||
+ data->cur_opmode == GP2AP020A00F_OPMODE_PS)
+ return -EBUSY;
+ if (!gp2ap020a00f_prox_detect_enabled(data)) {
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_PROX_DETECT);
+ if (err < 0)
+ return err;
+ }
+ set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EVENT, &data->flags);
+ thresh_buf = cpu_to_le16(
+ data->thresh_reg_val[GP2AP020A00F_THRESH_PL]);
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_PL_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
+ clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EVENT, &data->flags);
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_SHUTDOWN);
+ if (err < 0)
+ return err;
+ err = regmap_bulk_write(data->regmap, GP2AP020A00F_PL_L_REG,
+ (u8 *)&thresh_buf, 2);
+ break;
+ }
+
+ return err;
+}
+
+static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
+ unsigned int output_reg, int *val)
+{
+ u8 reg_buf[2];
+ int err;
+
+ err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
+ if (err < 0)
+ return err;
+
+ *val = le16_to_cpup((__le16 *)reg_buf);
+
+ return err;
+}
+
+static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
+ int output_val)
+{
+ u8 new_range = 0xff;
+ int err;
+
+ if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HIGH, &data->flags)) {
+ if (output_val > 16000) {
+ set_bit(GP2AP020A00F_FLAG_LUX_MODE_HIGH,
+ &data->flags);
+ new_range = GP2AP020A00F_RANGE_A_x128;
+ }
+ } else {
+ if (output_val < 1000) {
+ clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HIGH,
+ &data->flags);
+ new_range = GP2AP020A00F_RANGE_A_x8;
+ }
+ }
+
+ if (new_range != 0xff) {
+ err = regmap_update_bits(data->regmap,
+ GP2AP020A00F_ALS_REG,
+ GP2AP020A00F_RANGE_A_MASK,
+ new_range);
+ if (err < 0) {
+ dev_err(&data->client->dev,
+ "Adjusting device lux mode failed.\n");
+ goto error_ret;
+ }
+
+ return true;
+ }
+
+error_ret:
+ return false;
+}
+
+static irqreturn_t gp2ap020a00f_event_handler(int irq, void *data)
+{
+ struct iio_dev *indio_dev = data;
+ struct gp2ap020a00f_data *lgt = iio_priv(indio_dev);
+ u8 op_reg_flags, d0_reg_buf[2];
+ unsigned int output_val, op_reg_val;
+ int thresh_val_id, ret;
+
+ mutex_lock(&lgt->lock);
+
+ /* Read interrupt flags */
+ ret = regmap_read(lgt->regmap, GP2AP020A00F_OP_REG,
+ (unsigned int *)&op_reg_val);
+ if (ret < 0)
+ goto done;
+
+ op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
+ | GP2AP020A00F_PROX_DETECT);
+
+ op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
+ & ~GP2AP020A00F_PROX_DETECT);
+
+ /* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
+ if (lgt->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
+ ret = regmap_write(lgt->regmap, GP2AP020A00F_OP_REG,
+ op_reg_val);
+ if (ret < 0)
+ goto done;
+ }
+
+ if (lgt->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
+ lgt->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
+ lgt->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
+ goto done;
+ }
+
+ if (gp2ap020a00f_prox_detect_enabled(lgt)) {
+ if (op_reg_flags & GP2AP020A00F_PROX_DETECT) {
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(
+ IIO_PROXIMITY,
+ GP2AP020A00F_SCAN_MODE_PROXIMITY,
+ IIO_EV_TYPE_ROC,
+ IIO_EV_DIR_RISING),
+ iio_get_time_ns());
+ } else {
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(
+ IIO_PROXIMITY,
+ GP2AP020A00F_SCAN_MODE_PROXIMITY,
+ IIO_EV_TYPE_ROC,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns());
+ }
+
+ /*
+ * There shouldn't be anything else to do here
+ * in the PROX_DETECT mode.
+ */
+ goto done;
+ }
+
+
+ /*
+ * We need to read output value to distinguish
+ * between high and low ambient light threshold event.
+ */
+ if (op_reg_flags & GP2AP020A00F_FLAG_A) {
+ ret = regmap_bulk_read(lgt->regmap, GP2AP020A00F_D0_L_REG,
+ d0_reg_buf, 2);
+ if (ret < 0)
+ goto done;
+
+ output_val = le16_to_cpup((__le16 *)d0_reg_buf);
+
+ if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT,
+ &lgt->flags)) {
+ thresh_val_id =
+ GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
+ if (output_val > lgt->thresh_reg_val[thresh_val_id])
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(
+ IIO_LIGHT,
+ GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+ IIO_MOD_LIGHT_CLEAR,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING),
+ iio_get_time_ns());
+ }
+
+ if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT,
+ &lgt->flags)) {
+ thresh_val_id =
+ GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
+ if (output_val < lgt->thresh_reg_val[thresh_val_id])
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(
+ IIO_LIGHT,
+ GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+ IIO_MOD_LIGHT_CLEAR,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns());
+ }
+ }
+
+done:
+ /* This fires off trigger handler */
+ iio_trigger_poll(lgt->trig, 0);
+
+ mutex_unlock(&lgt->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
+{
+ struct iio_poll_func *pf = data;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct gp2ap020a00f_data *lgt = iio_priv(indio_dev);
+ size_t d_size = 0;
+ int i, out_val, ret;
+
+ for_each_set_bit(i, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ ret = regmap_bulk_read(lgt->regmap,
+ GP2AP020A00F_DATA_REG(i),
+ &lgt->buffer[d_size], 2);
+ if (ret < 0)
+ goto done;
+
+ if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
+ i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
+ out_val = le16_to_cpup((__le16 *)&lgt->buffer[d_size]);
+ gp2ap020a00f_adjust_lux_mode(lgt, out_val);
+ }
+ d_size += 2;
+ }
+
+ if (indio_dev->scan_timestamp) {
+ s64 *timestamp = (s64 *)((u8 *)lgt->buffer +
+ ALIGN(d_size, sizeof(s64)));
+ *timestamp = pf->timestamp;
+ }
+
+ iio_push_to_buffers(indio_dev, lgt->buffer);
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static u8 gp2ap020a00f_get_reg_by_event_code(u64 event_code)
+{
+ int event_dir = IIO_EVENT_CODE_EXTRACT_DIR(event_code);
+
+ switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ case IIO_PROXIMITY:
+ if (event_dir == IIO_EV_DIR_RISING)
+ return GP2AP020A00F_PH_L_REG;
+ else
+ return GP2AP020A00F_PL_L_REG;
+ case IIO_LIGHT:
+ if (event_dir == IIO_EV_DIR_RISING)
+ return GP2AP020A00F_TH_L_REG;
+ else
+ return GP2AP020A00F_TL_L_REG;
+ }
+
+ return -EINVAL;
+}
+
+static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
+ u64 event_code, int val)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ bool event_en = false;
+ u8 thresh_val_id;
+ u8 thresh_reg_l;
+ __le16 reg_buf;
+ int err = 0;
+
+ mutex_lock(&data->lock);
+
+ thresh_reg_l = gp2ap020a00f_get_reg_by_event_code(event_code);
+ thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
+
+ if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
+ err = -EINVAL;
+ goto error_ret;
+ }
+
+ data->thresh_reg_val[thresh_val_id] = val;
+
+ switch (thresh_reg_l) {
+ case GP2AP020A00F_TH_L_REG:
+ event_en = !!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT,
+ &data->flags);
+ break;
+ case GP2AP020A00F_TL_L_REG:
+ event_en = !!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT,
+ &data->flags);
+ break;
+ case GP2AP020A00F_PH_L_REG:
+ event_en = !!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EVENT,
+ &data->flags);
+ break;
+ case GP2AP020A00F_PL_L_REG:
+ event_en = !!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EVENT,
+ &data->flags);
+ break;
+ }
+
+ if (event_en) {
+ reg_buf = cpu_to_le16(
+ data->thresh_reg_val[thresh_val_id]);
+ err = regmap_bulk_write(data->regmap, thresh_reg_l,
+ (u8 *)®_buf, 2);
+ }
+
+error_ret:
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
+ u64 event_code, int *val)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ u8 thresh_reg_l;
+ int err = 0;
+
+ mutex_lock(&data->lock);
+
+ thresh_reg_l = gp2ap020a00f_get_reg_by_event_code(event_code);
+
+ if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
+ err = -EINVAL;
+ goto error_ret;
+ }
+
+ *val = data->thresh_reg_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
+
+error_ret:
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
+ u64 event_code, int state)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
+ int err;
+
+ cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
+ GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
+ cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
+ GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
+
+ /* In order to enable proximity detection feature in the device
+ * both high and low threshold registers have to be written
+ * with different values, greater than zero.
+ */
+ if (state) {
+ if (data->thresh_reg_val[GP2AP020A00F_THRESH_PL] == 0)
+ data->thresh_reg_val[GP2AP020A00F_THRESH_PL] = 10;
+
+ if (data->thresh_reg_val[GP2AP020A00F_THRESH_PH] == 0)
+ data->thresh_reg_val[GP2AP020A00F_THRESH_PH] = 11;
+ }
+
+ err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
+ if (err < 0)
+ return err;
+
+ err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
+ u64 event_code, int state)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ enum gp2ap020a00f_cmd cmd;
+ int err;
+
+ mutex_lock(&data->lock);
+
+ switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ case IIO_PROXIMITY:
+ err = gp2ap020a00f_write_prox_event_config(indio_dev,
+ event_code, state);
+ break;
+ case IIO_LIGHT:
+ if (IIO_EVENT_CODE_EXTRACT_DIR(event_code)
+ == IIO_EV_DIR_RISING) {
+ cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
+ GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
+ err = gp2ap020a00f_exec_cmd(data, cmd);
+ } else {
+ cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
+ GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
+ err = gp2ap020a00f_exec_cmd(data, cmd);
+ }
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
+ u64 event_code)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ int event_en = 0;
+
+ mutex_lock(&data->lock);
+
+ switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) {
+ case IIO_PROXIMITY:
+ if (IIO_EVENT_CODE_EXTRACT_DIR(event_code)
+ == IIO_EV_DIR_RISING)
+ event_en =
+ test_bit(GP2AP020A00F_FLAG_PROX_RISING_EVENT,
+ &data->flags);
+ else
+ event_en =
+ test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EVENT,
+ &data->flags);
+ break;
+ case IIO_LIGHT:
+ if (IIO_EVENT_CODE_EXTRACT_DIR(event_code)
+ == IIO_EV_DIR_RISING)
+ event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EVENT,
+ &data->flags);
+ else
+ event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EVENT,
+ &data->flags);
+ break;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return event_en;
+}
+
+static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
+ struct iio_chan_spec const *chan, int *val)
+{
+ enum gp2ap020a00f_cmd cmd;
+ int cnt_loops = 0, err;
+
+ switch (chan->scan_index) {
+ case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+ cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
+ break;
+ case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+ cmd = GP2AP020A00F_CMD_READ_RAW_IR;
+ break;
+ case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+ cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
+ break;
+ }
+
+ /*
+ * The purpose of this loop is repeating the conversion in case
+ * the output value exceedes the threshold related to the current
+ * lux mode - a new conversion has to be performed then, with
+ * adjusted maximum measurable range setting.
+ */
+ do {
+ err = gp2ap020a00f_exec_cmd(data, cmd);
+ if (err < 0) {
+ dev_err(&data->client->dev,
+ "gp2ap020a00f_exec_cmd failed\n");
+ goto error_ret;
+ }
+
+ msleep(1000);
+
+ err = gp2ap020a00f_read_output(data, chan->address, val);
+ if (err < 0)
+ dev_err(&data->client->dev,
+ "gp2ap020a00f_read_output failed\n");
+
+ data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
+
+ if (++cnt_loops > 2) {
+ dev_err(&data->client->dev,
+ "Lux mode adjusting error.\n");
+ break;
+ }
+ } while ((cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
+ cmd == GP2AP020A00F_CMD_READ_RAW_IR) &&
+ gp2ap020a00f_adjust_lux_mode(data, *val));
+
+
+error_ret:
+ return err;
+}
+
+static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ int err = -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev)) {
+ err = -EBUSY;
+ goto error_ret;
+ }
+
+ err = gp2ap020a00f_read_channel(data, chan, val);
+ break;
+ }
+
+error_ret:
+ mutex_unlock(&data->lock);
+
+ return err < 0 ? err : IIO_VAL_INT;
+}
+
+static const struct iio_chan_spec gp2ap020a00f_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .channel2 = IIO_MOD_LIGHT_CLEAR,
+ .modified = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .shift = 0,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
+ .address = GP2AP020A00F_D0_L_REG,
+ .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING) |
+ IIO_EV_BIT(IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ },
+ {
+ .type = IIO_LIGHT,
+ .channel2 = IIO_MOD_LIGHT_IR,
+ .modified = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .shift = 0,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
+ .address = GP2AP020A00F_D1_L_REG,
+ },
+ {
+ .type = IIO_PROXIMITY,
+ .modified = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .shift = 0,
+ .storagebits = 16,
+ .endianness = IIO_LE,
+ },
+ .scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
+ .address = GP2AP020A00F_D2_L_REG,
+ .event_mask = IIO_EV_BIT(IIO_EV_TYPE_ROC,
+ IIO_EV_DIR_RISING) |
+ IIO_EV_BIT(IIO_EV_TYPE_ROC,
+ IIO_EV_DIR_FALLING),
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
+};
+
+static const struct iio_info gp2ap020a00f_info = {
+ .read_raw = &gp2ap020a00f_read_raw,
+ .read_event_value = &gp2ap020a00f_read_event_val,
+ .read_event_config = &gp2ap020a00f_read_event_config,
+ .write_event_value = &gp2ap020a00f_write_event_val,
+ .write_event_config = &gp2ap020a00f_write_event_config,
+ .driver_module = THIS_MODULE,
+};
+
+static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ int i, err = 0;
+
+ mutex_lock(&data->lock);
+
+ /* Enable triggers according to the scan_mask */
+ for_each_set_bit(i, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ switch (i) {
+ case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
+ if (err < 0)
+ goto error_ret;
+ break;
+ case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_IR_EN);
+ if (err < 0)
+ goto error_ret;
+ break;
+ case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_PROX_EN);
+ if (err < 0)
+ goto error_ret;
+ break;
+ }
+ }
+
+ data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (data->buffer == NULL) {
+ err = -ENOMEM;
+ goto error_ret;
+ }
+
+ err = iio_triggered_buffer_postenable(indio_dev);
+
+error_ret:
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ int i, err;
+
+ mutex_lock(&data->lock);
+
+ err = iio_triggered_buffer_predisable(indio_dev);
+ if (err < 0)
+ goto error_ret;
+
+ for_each_set_bit(i, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ switch (i) {
+ case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
+ if (err < 0)
+ goto error_ret;
+ break;
+ case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_IR_DIS);
+ if (err < 0)
+ goto error_ret;
+ break;
+ case GP2AP020A00F_SCAN_MODE_PROXIMITY:
+ err = gp2ap020a00f_exec_cmd(data,
+ GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
+ if (err < 0)
+ goto error_ret;
+ break;
+ }
+ }
+
+ kfree(data->buffer);
+
+error_ret:
+ mutex_unlock(&data->lock);
+
+ return err;
+}
+
+static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
+ .preenable = &iio_sw_buffer_preenable,
+ .postenable = &gp2ap020a00f_buffer_postenable,
+ .predisable = &gp2ap020a00f_buffer_predisable,
+};
+
+static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
+ .owner = THIS_MODULE,
+};
+
+static int gp2ap020a00f_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct gp2ap020a00f_data *data;
+ struct iio_dev *indio_dev;
+ struct regmap *regmap;
+ int err;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+
+ data->vled_reg = devm_regulator_get(&client->dev, "vled");
+ if (IS_ERR(data->vled_reg))
+ return PTR_ERR(data->vled_reg);
+
+ err = regulator_enable(data->vled_reg);
+ if (err)
+ return err;
+
+ regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Regmap initialization failed.\n");
+ err = PTR_ERR(regmap);
+ goto error_regulator_disable;
+ }
+
+ /* Initialize device registers */
+ err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
+ gp2ap020a00f_reg_init_tab,
+ ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
+
+ if (err < 0) {
+ dev_err(&client->dev, "Device initialization failed.\n");
+ goto error_regulator_disable;
+ }
+
+ i2c_set_clientdata(client, indio_dev);
+
+ data->client = client;
+ data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
+ data->regmap = regmap;
+
+ mutex_init(&data->lock);
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = gp2ap020a00f_channels;
+ indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
+ indio_dev->info = &gp2ap020a00f_info;
+ indio_dev->name = id->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ /* Allocate buffer */
+ err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+ &gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
+ if (err < 0)
+ goto error_regulator_disable;
+
+ /* Allocate trigger */
+ data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
+ indio_dev->name);
+ if (data->trig == NULL) {
+ err = -ENOMEM;
+ dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
+ goto error_uninit_buffer;
+ }
+
+ err = devm_request_threaded_irq(&client->dev,
+ client->irq,
+ NULL,
+ &gp2ap020a00f_event_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "gp2ap020a00f_event",
+ indio_dev);
+ if (err < 0) {
+ dev_err(&client->dev, "Irq request failed.\n");
+ goto error_uninit_buffer;
+ }
+
+ data->trig->ops = &gp2ap020a00f_trigger_ops;
+ data->trig->dev.parent = &data->client->dev;
+
+ err = iio_trigger_register(data->trig);
+ if (err < 0) {
+ dev_err(&client->dev, "Failed to register iio trigger.\n");
+ goto error_uninit_buffer;
+ }
+
+ indio_dev->trig = data->trig;
+
+ err = iio_device_register(indio_dev);
+ if (err < 0)
+ goto error_trigger_unregister;
+
+ return 0;
+
+error_trigger_unregister:
+ iio_trigger_unregister(data->trig);
+error_uninit_buffer:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_regulator_disable:
+ regulator_disable(data->vled_reg);
+
+ return err;
+}
+
+static int gp2ap020a00f_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct gp2ap020a00f_data *data = iio_priv(indio_dev);
+ int err;
+
+ err = gp2ap020a00f_set_operation_mode(data,
+ GP2AP020A00F_OPMODE_SHUTDOWN);
+ if (err < 0)
+ dev_err(&indio_dev->dev, "Failed to power off the device.\n");
+
+ iio_device_unregister(indio_dev);
+ iio_trigger_unregister(data->trig);
+ iio_triggered_buffer_cleanup(indio_dev);
+ regulator_disable(data->vled_reg);
+
+ return 0;
+}
+
+static const struct i2c_device_id gp2ap020a00f_id[] = {
+ { GP2A_I2C_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id gp2ap020a00f_of_match[] = {
+ { .compatible = "sharp,gp2ap020a00f" },
+ { }
+};
+#endif
+
+static struct i2c_driver gp2ap020a00f_driver = {
+ .driver = {
+ .name = GP2A_I2C_NAME,
+ .of_match_table = of_match_ptr(gp2ap020a00f_of_match),
+ .owner = THIS_MODULE,
+ },
+ .probe = gp2ap020a00f_probe,
+ .remove = gp2ap020a00f_remove,
+ .id_table = gp2ap020a00f_id,
+};
+
+module_i2c_driver(gp2ap020a00f_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
+MODULE_LICENSE("GPL v2");
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
