Am Mittwoch, den 14.08.2013, 16:48 +0800 schrieb Nicolin Chen:
> Hi Sascha,
>
> On Wed, Aug 14, 2013 at 09:50:17AM +0200, Sascha Hauer wrote:
> > > + - tx-clksrc-names : The names for all available clock sources for tx, which
> > > + is also being listed in SoC reference manual, ClkSrc_Sel bit of SPDIF_SRPC.
> > > + And the name list would be different between different SoC. Use 'null' for
> > > + those unlisted names, and the max number of tx-clksrc-names should be 8.
> > > +
> > > + - rx-clksrc-names : The names for all available clock sources for rx, which
> > > + is also being listed in SoC reference manual, TxClk_Source bit of SPDIF_STC.
> > > + And the name list would be different between different SoC. Use 'null' for
> > > + those unlisted names, and the max number of rx-clksrc-names should be 16.
> > > +
> > > +Optional properties:
> > > +
> > > + - rx-clksrc-lock: This is a boolean property. If present, ClkSrc_Sel bit
> > > + of SPDIF_SRPC would be set a clock source that cares DPLL locked condition.
> > > +
> > > +Example1:
> > > +
> > > +spdif: spdif@02004000 {
> > > + clocks = <&clks 197>;
> > > + clock-names = "core";
> > > + rx-clksrc-lock;
> > > + rx-clksrc-names =
> > > + "lock.ext", "lock.spdif", "lock.asrc",
> > > + "lock.spdif_ext", "lock.esai", "ext",
> > > + "spdif", "asrc", "spdif_ext", "esai",
> > > + "lock.mlb", "lock.mlb_phy", "mlb",
> > > + "mlb_phy";
> > > + tx-clksrc-names =
> > > + "xtal", "spdif", "asrc", "spdif_ext",
> > > + "esai", "ipg", "mlb", "mlb_phy";
> >
> > I had a hard time understanding what you are doing here.
> >
> > With this the clk names in arch/arm/mach-imx/clk-imx6q.c become an API
> > between the Kernel and the devicetree. Don't do that.
> >
> > There is a standardized devicetree binding for clocks. Use it.
>
> I think I should first explain to you what this part is doing:
> The driver needs to set Clk_source bit for TX/RX to select the
> clock from a clock mux. The names listed above are those of the
> clocks connecting to the mux, while they are not only internal
> clocks which're included in clk-imx6q.c but also external ones,
> an on-board external osc for example.
>
> The driver does get the clock by using the standard DT binding,
> see the 'clocks = <&clks 197>' above, and then compare this
> obtained clock->name with the name list to decide which value
> should be set to the Clk_source bit.
>
> ==================================================================
> ClkSrc_Sel from i.MX6Q reference manual:
>
> Clock source selection, all other settings not shown are reserved:
> 0000 if (DPLL Locked) SPDIF_RxClk else extal
> 0001 if (DPLL Locked) SPDIF_RxClk else spdif_clk
> 0010 if (DPLL Locked) SPDIF_RxClk else asrc_clk
> 0011 if (DPLL Locked) SPDIF_RxClk else spdif_extclk
> 0100 if (DPLL Locked) SPDIF_Rxclk else esai_hckt
> 0101 extal_clk
> 0110 spdif_clk
> 0111 asrc_clk
> 1000 spdif_extclk
> 1001 esai_hckt
> 1010 if (DPLL Locked) SPDIF_RxClk else mlb_clk
> ==================================================================
==================================================================
